lkml.org 
[lkml]   [2022]   [Nov]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] ARM: dts: am335x: align LED node names with dtschema
Date
The node names should be generic and DT schema expects certain pattern:

am335x-baltos-ir2110.dtb: leds: 'app', 'power', 'wlan' do not match any of the regexes: '(^led-[0-9a-f]$|led)', 'pinctrl-[0-9]+'

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
arch/arm/boot/dts/am335x-baltos-leds.dtsi | 6 +++---
arch/arm/boot/dts/am335x-pocketbeagle.dts | 8 ++++----
2 files changed, 7 insertions(+), 7 deletions(-)

diff --git a/arch/arm/boot/dts/am335x-baltos-leds.dtsi b/arch/arm/boot/dts/am335x-baltos-leds.dtsi
index 9a79f727baf6..025014657d12 100644
--- a/arch/arm/boot/dts/am335x-baltos-leds.dtsi
+++ b/arch/arm/boot/dts/am335x-baltos-leds.dtsi
@@ -17,18 +17,18 @@ leds {

compatible = "gpio-leds";

- power {
+ led-power {
label = "onrisc:red:power";
linux,default-trigger = "default-on";
gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
default-state = "on";
};
- wlan {
+ led-wlan {
label = "onrisc:blue:wlan";
gpios = <&gpio0 16 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
- app {
+ led-app {
label = "onrisc:green:app";
gpios = <&gpio0 17 GPIO_ACTIVE_HIGH>;
default-state = "off";
diff --git a/arch/arm/boot/dts/am335x-pocketbeagle.dts b/arch/arm/boot/dts/am335x-pocketbeagle.dts
index 5e415d8ffdd8..0ba4883cd4ef 100644
--- a/arch/arm/boot/dts/am335x-pocketbeagle.dts
+++ b/arch/arm/boot/dts/am335x-pocketbeagle.dts
@@ -23,28 +23,28 @@ leds {

compatible = "gpio-leds";

- usr0 {
+ led-usr0 {
label = "beaglebone:green:usr0";
gpios = <&gpio1 21 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "heartbeat";
default-state = "off";
};

- usr1 {
+ led-usr1 {
label = "beaglebone:green:usr1";
gpios = <&gpio1 22 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "mmc0";
default-state = "off";
};

- usr2 {
+ led-usr2 {
label = "beaglebone:green:usr2";
gpios = <&gpio1 23 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "cpu0";
default-state = "off";
};

- usr3 {
+ led-usr3 {
label = "beaglebone:green:usr3";
gpios = <&gpio1 24 GPIO_ACTIVE_HIGH>;
default-state = "off";
--
2.34.1
\
 
 \ /
  Last update: 2022-11-25 15:42    [W:0.042 / U:0.124 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site