lkml.org 
[lkml]   [2022]   [Nov]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH bpf-next v3 1/3] bpf: Sanitize STX/ST in jited BPF progs with KASAN
Date
Make the verifier sanitize STX/ST insns in jited BPF programs
by dispatching addr to kernel functions that are instrumented
by KASAN.

Only STX/ST insns that aren't in patches added by other passes
using REG_AX or dst_reg isn't R10 are sanitized. The former
confilicts with us, the latter are trivial for the verifier to
check, skip them to reduce the footprint.

The instrumentation is conducted in bpf_misc_fixup(). During it,
all the scratch regs are saved to extended stack to make sure
the checking functions can't corrupt them. Then, the addr to
check plus offset is saved to R1, R0 is backed up to REG_AX.
We extend stack size in this mode because we don't rely on any
verifier's knowledge about calculated stack size or the liveness
of each reg. The corresponding bpf_asan_storeN() is inserted
before store insn, and then regs are restored. The checking
functions are instrumented with KASAN and they simply write to
the target addr for certain bytes, KASAN conducts the actual
checking. An extra Kconfig is used to enable this, so normal
use case won't be impacted at all.

Signed-off-by: Hao Sun <sunhao.th@gmail.com>
---
kernel/bpf/Kconfig | 13 +++++
kernel/bpf/verifier.c | 113 ++++++++++++++++++++++++++++++++++++++++++
2 files changed, 126 insertions(+)

diff --git a/kernel/bpf/Kconfig b/kernel/bpf/Kconfig
index 2dfe1079f772..d41e1d2d26f1 100644
--- a/kernel/bpf/Kconfig
+++ b/kernel/bpf/Kconfig
@@ -99,4 +99,17 @@ config BPF_LSM

If you are unsure how to answer this question, answer N.

+config BPF_PROG_KASAN
+ bool "Enable BPF Program Address Sanitize"
+ depends on BPF_JIT_ALWAYS_ON
+ depends on KASAN
+ help
+ Enables instrumentation on LDX/STX/ST insn to capture memory
+ access errors in BPF programs missed by the verifier.
+
+ The actual check is conducted by KASAN, this feature presents
+ certain overhead, and should be used mainly by testing purpose.
+
+ If you are unsure how to answer this question, answer N.
+
endmenu # "BPF subsystem"
diff --git a/kernel/bpf/verifier.c b/kernel/bpf/verifier.c
index 6599d25dae38..7a31fceee370 100644
--- a/kernel/bpf/verifier.c
+++ b/kernel/bpf/verifier.c
@@ -15327,6 +15327,26 @@ static int fixup_kfunc_call(struct bpf_verifier_env *env, struct bpf_insn *insn,
return 0;
}

+#ifdef CONFIG_BPF_PROG_KASAN
+
+/* Those are functions instrumented with KASAN for actual sanitizing. */
+
+#define BPF_ASAN_STORE(n) \
+ notrace u64 bpf_asan_store##n(u##n *addr); \
+ notrace u64 bpf_asan_store##n(u##n *addr) \
+ { \
+ u##n ret = *addr; \
+ *addr = ret; \
+ return ret; \
+ }
+
+BPF_ASAN_STORE(8);
+BPF_ASAN_STORE(16);
+BPF_ASAN_STORE(32);
+BPF_ASAN_STORE(64);
+
+#endif
+
/* Do various post-verification rewrites in a single program pass.
* These rewrites simplify JIT and interpreter implementations.
*/
@@ -15344,6 +15364,9 @@ static int do_misc_fixups(struct bpf_verifier_env *env)
struct bpf_prog *new_prog;
struct bpf_map *map_ptr;
int i, ret, cnt, delta = 0;
+#ifdef CONFIG_BPF_PROG_KASAN
+ bool in_patch_use_ax = false;
+#endif

for (i = 0; i < insn_cnt; i++, insn++) {
/* Make divide-by-zero exceptions impossible. */
@@ -15460,6 +15483,92 @@ static int do_misc_fixups(struct bpf_verifier_env *env)
continue;
}

+#ifdef CONFIG_BPF_PROG_KASAN
+
+/* With CONFIG_BPF_PROG_KASAN, we extend prog stack to MAX_BPF_STACK + 64
+ * to backup scratch regs before calling the sanitize functions, because
+ * we don't rely on verifier's knowledge about calculated stack size or
+ * liveness of each reg.
+ */
+#define __BACKUP_REG(n) \
+ *patch++ = BPF_STX_MEM(BPF_DW, BPF_REG_10, BPF_REG_##n, \
+ -(MAX_BPF_STACK + 8 * n))
+#define BACKUP_SCRATCH_REGS \
+ __BACKUP_REG(1); \
+ __BACKUP_REG(2); \
+ __BACKUP_REG(3); \
+ __BACKUP_REG(4); \
+ __BACKUP_REG(5)
+
+#define __RESTORE_REG(n) \
+ *patch++ = BPF_LDX_MEM(BPF_DW, BPF_REG_##n, BPF_REG_10, \
+ -(MAX_BPF_STACK + 8 * n))
+#define RESTORE_SCRATCH_REGS \
+ __RESTORE_REG(1); \
+ __RESTORE_REG(2); \
+ __RESTORE_REG(3); \
+ __RESTORE_REG(4); \
+ __RESTORE_REG(5)
+
+ /* Patches that use REG_AX confilict with us, skip it.
+ * This starts with first use of REG_AX, stops only when
+ * we see next ldx/stx/st insn with valid aux information.
+ */
+ aux = &env->insn_aux_data[i + delta];
+ if (in_patch_use_ax && (int)aux->ptr_type != 0)
+ in_patch_use_ax = false;
+ if (insn->dst_reg == BPF_REG_AX || insn->src_reg == BPF_REG_AX)
+ in_patch_use_ax = true;
+
+ /* Sanitize ST/STX operation. */
+ if (BPF_CLASS(insn->code) == BPF_ST ||
+ BPF_CLASS(insn->code) == BPF_STX) {
+ struct bpf_insn sanitize_fn;
+ struct bpf_insn *patch = &insn_buf[0];
+
+ /* Skip st/stx to R10, they're trivial to check. */
+ if (in_patch_use_ax || insn->dst_reg == BPF_REG_10 ||
+ BPF_MODE(insn->code) == BPF_NOSPEC)
+ continue;
+
+ switch (BPF_SIZE(insn->code)) {
+ case BPF_B:
+ sanitize_fn = BPF_EMIT_CALL(bpf_asan_store8);
+ break;
+ case BPF_H:
+ sanitize_fn = BPF_EMIT_CALL(bpf_asan_store16);
+ break;
+ case BPF_W:
+ sanitize_fn = BPF_EMIT_CALL(bpf_asan_store32);
+ break;
+ case BPF_DW:
+ sanitize_fn = BPF_EMIT_CALL(bpf_asan_store64);
+ break;
+ }
+
+ BACKUP_SCRATCH_REGS;
+ *patch++ = BPF_MOV64_REG(BPF_REG_AX, BPF_REG_0);
+ if (insn->dst_reg != BPF_REG_1)
+ *patch++ = BPF_MOV64_REG(BPF_REG_1, insn->dst_reg);
+ if (insn->off != 0)
+ *patch++ = BPF_ALU64_IMM(BPF_ADD, BPF_REG_1, insn->off);
+ *patch++ = sanitize_fn;
+ RESTORE_SCRATCH_REGS;
+ *patch++ = BPF_MOV64_REG(BPF_REG_0, BPF_REG_AX);
+ *patch++ = *insn;
+ cnt = patch - insn_buf;
+
+ new_prog = bpf_patch_insn_data(env, i + delta, insn_buf, cnt);
+ if (!new_prog)
+ return -ENOMEM;
+
+ delta += cnt - 1;
+ env->prog = prog = new_prog;
+ insn = new_prog->insnsi + i + delta;
+ continue;
+ }
+#endif
+
if (insn->code != (BPF_JMP | BPF_CALL))
continue;
if (insn->src_reg == BPF_PSEUDO_CALL)
@@ -15852,6 +15961,10 @@ static int do_misc_fixups(struct bpf_verifier_env *env)
}
}

+#ifdef CONFIG_BPF_PROG_KASAN
+ prog->aux->stack_depth = MAX_BPF_STACK + 64;
+#endif
+
sort_kfunc_descs_by_imm(env->prog);

return 0;
--
2.38.1
\
 
 \ /
  Last update: 2022-11-25 13:29    [W:0.177 / U:0.340 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site