lkml.org 
[lkml]   [2022]   [Nov]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v3 2/3] dt-bindings: iio: magnetometer: add ti tmag5273 documentation file
Date
Add bindings for TI TMAG5273.

Signed-off-by: Gerald Loacker <gerald.loacker@wolfvision.net>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
Changes in v3:
- dropped quotes from strings

Changes in v2:
- Removed nodename
- Changed angle-enable to angle-measurement and used strings
- Added interrupts
- Removed vcc-supply from required properties
- Changed i2c-0 to i2c in examples
.../iio/magnetometer/ti,tmag5273.yaml | 75 +++++++++++++++++++
MAINTAINERS | 6 ++
2 files changed, 81 insertions(+)
create mode 100644 Documentation/devicetree/bindings/iio/magnetometer/ti,tmag5273.yaml

diff --git a/Documentation/devicetree/bindings/iio/magnetometer/ti,tmag5273.yaml b/Documentation/devicetree/bindings/iio/magnetometer/ti,tmag5273.yaml
new file mode 100644
index 000000000000..121d540b7b6e
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/magnetometer/ti,tmag5273.yaml
@@ -0,0 +1,75 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/magnetometer/ti,tmag5273.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TI TMAG5273 Low-Power Linear 3D Hall-Effect Sensor
+
+maintainers:
+ - Gerald Loacker <gerald.loacker@wolfvision.net>
+
+description:
+ The TI TMAG5273 is a low-power linear 3D Hall-effect sensor. This device
+ integrates three independent Hall-effect sensors in the X, Y, and Z axes.
+ The device has an integrated temperature sensor available. The TMAG5273
+ can be configured through the I2C interface to enable any combination of
+ magnetic axes and temperature measurements. An integrated angle calculation
+ engine (CORDIC) provides full 360° angular position information for both
+ on-axis and off-axis angle measurement topologies. The angle calculation is
+ performed using two user-selected magnetic axes.
+
+properties:
+ compatible:
+ const: ti,tmag5273
+
+ reg:
+ maxItems: 1
+
+ "#io-channel-cells":
+ const: 1
+
+ ti,angle-measurement:
+ $ref: /schemas/types.yaml#/definitions/string
+ description:
+ Enables angle measurement in the selected plane.
+ If not specified, "x-y" will be anables as default.
+ enum:
+ - off
+ - x-y
+ - y-z
+ - x-z
+
+ vcc-supply:
+ description:
+ A regulator providing 1.7 V to 3.6 V supply voltage on the VCC pin,
+ typically 3.3 V.
+
+ interrupts:
+ description:
+ The low active interrupt can be configured to be fixed width or latched.
+ Interrupt events can be configured to be generated from magnetic
+ thresholds or when a conversion is completed.
+ maxItems: 1
+
+required:
+ - compatible
+ - reg
+
+additionalProperties: false
+
+examples:
+ - |
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ magnetometer@35 {
+ compatible = "ti,tmag5273";
+ reg = <0x35>;
+ #io-channel-cells = <1>;
+ ti,angle-measurement = "x-z";
+ vcc-supply = <&vcc3v3>;
+ };
+ };
+...
diff --git a/MAINTAINERS b/MAINTAINERS
index cf0f18502372..ea7acec52f8b 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -20613,6 +20613,12 @@ L: alsa-devel@alsa-project.org (moderated for non-subscribers)
S: Odd Fixes
F: sound/soc/codecs/tas571x*

+TI TMAG5273 MAGNETOMETER DRIVER
+M: Gerald Loacker <gerald.loacker@wolfvision.net>
+L: linux-iio@vger.kernel.org
+S: Maintained
+F: Documentation/devicetree/bindings/iio/magnetometer/ti,tmag5273.yaml
+
TI TRF7970A NFC DRIVER
M: Mark Greer <mgreer@animalcreek.com>
L: linux-wireless@vger.kernel.org
--
2.37.2
\
 
 \ /
  Last update: 2022-11-25 09:36    [W:3.554 / U:0.744 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site