lkml.org 
[lkml]   [2022]   [Nov]   [24]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 1/3]hwmon: Modify to support Phytium FT2000/4 CPU for acpi
On 11/23/22 19:05, Wang Honghui wrote:
> Modify to support Phytium FT2000/4 CPU for acpi
>
> Signed-off-by: Wang Honghui <honghui.wang@ucas.com.cn>
> ---
> drivers/hwmon/scpi-hwmon.c | 30 +++++++++++++++++++++++++-----
> 1 file changed, 25 insertions(+), 5 deletions(-)
>
> diff --git a/drivers/hwmon/scpi-hwmon.c b/drivers/hwmon/scpi-hwmon.c
> index 4d75385f7d5e..6021ae00b334 100644
> --- a/drivers/hwmon/scpi-hwmon.c
> +++ b/drivers/hwmon/scpi-hwmon.c
> @@ -14,6 +14,7 @@
> #include <linux/slab.h>
> #include <linux/sysfs.h>
> #include <linux/thermal.h>
> +#include <linux/acpi.h>
>
Alphabetic include file order, please.

> struct sensor_data {
> unsigned int scale;
> @@ -132,6 +133,13 @@ static const struct of_device_id scpi_of_match[] = {
> };
> MODULE_DEVICE_TABLE(of, scpi_of_match);
>
> +/* Wang Honghui add to support Phytium FT2000/4 CPU for acpi */

Irrelevant comment.

> +static const struct acpi_device_id scpi_sensors_acpi_match[] = {
> + { .id = "PHYT000D" },
> + { }
> +};
> +MODULE_DEVICE_TABLE(acpi, scpi_sensors_acpi_match);
> +
> static int scpi_hwmon_probe(struct platform_device *pdev)
> {
> u16 nr_sensors, i;
> @@ -141,6 +149,7 @@ static int scpi_hwmon_probe(struct platform_device *pdev)
> struct scpi_ops *scpi_ops;
> struct device *hwdev, *dev = &pdev->dev;
> struct scpi_sensors *scpi_sensors;
> + const struct acpi_device_id *match;
> int idx, ret;
>
> scpi_ops = get_scpi_ops();
> @@ -170,11 +179,22 @@ static int scpi_hwmon_probe(struct platform_device *pdev)
>
> scpi_sensors->scpi_ops = scpi_ops;
>
> - scale = of_device_get_match_data(&pdev->dev);
> - if (!scale) {
> - dev_err(&pdev->dev, "Unable to initialize scpi-hwmon data\n");
> - return -ENODEV;
> - }
> + /* Wang Honghui modified to support Phytium FT2000/4 CPU for acpi */

Irrelevant comment.

> + if (dev->of_node) {
> + scale = of_device_get_match_data(&pdev->dev);
> + if (!scale) {
> + dev_err(&pdev->dev, "Unable to initialize scpi-hwmon data\n");
> + return -ENODEV;
> + }
> + } else {
> + match = acpi_match_device(dev->driver->acpi_match_table, dev);
> + if (!match) {
> + dev_err(dev, "scpi-hwmon: Error ACPI match data is missing\n");
> + return -ENODEV;
> + }
> +
> + scale = scpi_scale;
> + }

scale = device_get_match_data(&pdev->dev);

should do after setting it in the acpi_device_id array.

Guenter

>
> for (i = 0, idx = 0; i < nr_sensors; i++) {
> struct sensor_data *sensor = &scpi_sensors->data[idx];

\
 
 \ /
  Last update: 2022-11-24 15:36    [W:0.035 / U:0.140 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site