lkml.org 
[lkml]   [2022]   [Nov]   [24]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v11 14/14] tpm, tpm_tis: Enable interrupt test
Date
From: Lino Sanfilippo <l.sanfilippo@kunbus.com>

The test for interrupts in tpm_tis_send() is skipped if the flag
TPM_CHIP_FLAG_IRQ is not set. Since the current code never sets the flag
initially the test is never executed.

Fix this by setting the flag in tpm_tis_gen_interrupt() right after
interrupts have been enabled and before the test is executed.

Signed-off-by: Lino Sanfilippo <l.sanfilippo@kunbus.com>
Tested-by: Michael Niewöhner <linux@mniewoehner.de>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
---
drivers/char/tpm/tpm_tis_core.c | 5 +++++
1 file changed, 5 insertions(+)

diff --git a/drivers/char/tpm/tpm_tis_core.c b/drivers/char/tpm/tpm_tis_core.c
index 94a2bfb244b3..602ca4bb8e2f 100644
--- a/drivers/char/tpm/tpm_tis_core.c
+++ b/drivers/char/tpm/tpm_tis_core.c
@@ -789,10 +789,15 @@ static void tpm_tis_gen_interrupt(struct tpm_chip *chip)
cap_t cap;
int ret;

+ chip->flags |= TPM_CHIP_FLAG_IRQ;
+
if (chip->flags & TPM_CHIP_FLAG_TPM2)
ret = tpm2_get_tpm_pt(chip, 0x100, &cap2, desc);
else
ret = tpm1_getcap(chip, TPM_CAP_PROP_TIS_TIMEOUT, &cap, desc, 0);
+
+ if (ret)
+ chip->flags &= ~TPM_CHIP_FLAG_IRQ;
}

/* Register the IRQ and issue a command that will cause an interrupt. If an
--
2.36.1
\
 
 \ /
  Last update: 2022-11-24 14:58    [W:0.177 / U:3.420 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site