lkml.org 
[lkml]   [2022]   [Nov]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    /
    From
    Subject[v4 0/5] Support pwm/tach driver for aspeed ast26xx
    Date
    Unlike the old design that the register setting of the TACH should based
    on the configure of the PWM. In ast26xx, the dependency between pwm and
    tach controller is eliminated and becomes a separate hardware block. One
    is used to provide pwm output and another is used to monitor the frequency
    of the input. Therefore, this patch serials implements them by writing the
    two driver "pwm-aspeed-ast2600.c" and "tach-aspeed-ast2600.c". The former
    is following the pwm subsystem which can apply the existed driver to
    controller the fan(pwm-fan.c), beeper(pwm-beeper.c) and so on. The latter
    is following the sysfs interface of hwmon to creat the node for fan
    monitor.

    Changes since v3:
    - pwm
    - Remove unnecessary include header
    - Fix warning Prefer "GPL" over "GPL v2"
    - tach:
    - Remove the paremeter min_rpm and max_rpm and return the tach value
    directly without any polling or delay.
    - Fix warning Prefer "GPL" over "GPL v2"
    - dt-binding:
    - Replace underscore in node names with dashes
    - Split per subsystem

    Changes since v2:
    - pwm:
    - Use devm_* api to simplify the error cleanup
    - Fix the multi-line alignment problem
    - tach:
    - Add tach-aspeed-ast2600 to index.rst
    - Fix the multi-line alignment problem
    - Remove the tach enable/disable when read the rpm
    - Fix some coding format issue

    Changes since v1:
    - tach:
    - Add the document tach-aspeed-ast2600.rst
    - Use devm_* api to simplify the error cleanup.
    - Change hwmon register api to devm_hwmon_device_register_with_info

    Billy Tsai (5):
    dt-bindings: mfd: Add aspeed pwm-tach binding
    dt-bindings: pwm: Add bindings for aspeed pwm controller
    dt-bindings: hwmon: Add bindings for aspeed tach controller
    pwm: Add Aspeed ast2600 PWM support
    hwmon: Add Aspeed ast2600 TACH support

    .../bindings/hwmon/aspeed,ast2600-tach.yaml | 36 ++
    .../bindings/mfd/aspeed,ast2600-pwm-tach.yaml | 73 ++++
    .../bindings/pwm/aspeed,ast2600-pwm.yaml | 54 +++
    Documentation/hwmon/index.rst | 1 +
    Documentation/hwmon/tach-aspeed-ast2600.rst | 24 ++
    drivers/hwmon/Kconfig | 9 +
    drivers/hwmon/Makefile | 1 +
    drivers/hwmon/tach-aspeed-ast2600.c | 399 ++++++++++++++++++
    drivers/pwm/Kconfig | 10 +
    drivers/pwm/Makefile | 1 +
    drivers/pwm/pwm-aspeed-ast2600.c | 318 ++++++++++++++
    11 files changed, 926 insertions(+)
    create mode 100644 Documentation/devicetree/bindings/hwmon/aspeed,ast2600-tach.yaml
    create mode 100644 Documentation/devicetree/bindings/mfd/aspeed,ast2600-pwm-tach.yaml
    create mode 100644 Documentation/devicetree/bindings/pwm/aspeed,ast2600-pwm.yaml
    create mode 100644 Documentation/hwmon/tach-aspeed-ast2600.rst
    create mode 100644 drivers/hwmon/tach-aspeed-ast2600.c
    create mode 100644 drivers/pwm/pwm-aspeed-ast2600.c

    --
    2.25.1

    \
     
     \ /
      Last update: 2022-11-23 07:20    [W:2.417 / U:0.044 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site