lkml.org 
[lkml]   [2022]   [Nov]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v3 2/2] serial: core: Add port port device to flush TX on runtime resume
On Wed, Nov 23, 2022 at 10:28:25AM +0200, Tony Lindgren wrote:
> With PM runtime enabled for the serial port controllers, we can now flush
> pending TX for the port on runtime PM resume as suggested by
> Johan Hovold <johan@kernel.org>.

I believe it's quite a duplication of email addresses (they are in Cc and will
be on lore.kernel.org) and also below.

> To flush the pending TX, let's set up each port as a proper device as
> suggested by Greg Kroah-Hartman <gregkh@linuxfoundation.org>.
>
> We set up each port as a child device for the serial port controller
> device. We use platform device for this and pass the port information
> in platform_data.
>
> Let's just do mimimal changes needed for now, more port specific code
> can be then moved from serial_core.c to serial_port.c as needed.

...

> +static int serial_core_add_port_device(struct uart_port *port)
> +{
> + struct serial_port_platdata pd;
> + struct platform_device *pdev;
> + int ret;
> +
> + pdev = platform_device_alloc("serial-port", PLATFORM_DEVID_AUTO);
> + if (!pdev)
> + return -ENOMEM;
> +
> + pdev->dev.parent = port->dev;
> + pd.state = port->state;
> +
> + ret = platform_device_add_data(pdev, &pd, sizeof(pd));
> + if (ret)
> + goto err_put;
> +
> + ret = platform_device_add(pdev);
> + if (ret)
> + goto err_put;
> +
> + port->state->port_dev = &pdev->dev;
> +
> + return 0;
> +
> +err_put:
> + platform_device_put(pdev);
> +
> + return ret;

Can we simply utilize platform_device_register_full()?

> +}

...

> +EXPORT_SYMBOL(serial_port_get);

Can we move these to namespace from day 1?

...

> + return (!uart_tx_stopped(port) &&
> + uart_circ_chars_pending(&port->state->xmit));

Outer parentheses are redundant.

...

> +static const struct dev_pm_ops serial_port_pm = {
> + SET_RUNTIME_PM_OPS(NULL, serial_port_runtime_resume, NULL)
> +};

Can't we use new macros / helpers which starts from DEFINE_...

...

> + pm_runtime_set_autosuspend_delay(&pdev->dev,
> + SERIAL_PORT_AUTOSUSPEND_DELAY_MS);

With temporary

struct device *dev = &pdev->dev;

this in particular become one line.

...

> + .pm = &serial_port_pm,

As per above, use pm_ptr() ?

...

> +

Unneeded blank line.

> +module_platform_driver(serial_port_driver);

--
With Best Regards,
Andy Shevchenko


\
 
 \ /
  Last update: 2022-11-23 19:38    [W:0.096 / U:0.012 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site