lkml.org 
[lkml]   [2022]   [Nov]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH v3 2/2] soc: qcom: Add Qualcomm Ramp Controller driver
From
On 15/11/2022 18:45, AngeloGioacchino Del Regno wrote:
> The Ramp Controller is used to program the sequence ID for pulse
> swallowing, enable sequence and linking sequence IDs for the CPU
> cores on some Qualcomm SoCs.
>
> Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
> ---
> drivers/soc/qcom/Kconfig | 9 +
> drivers/soc/qcom/Makefile | 1 +
> drivers/soc/qcom/ramp_controller.c | 331 +++++++++++++++++++++++++++++
> 3 files changed, 341 insertions(+)
> create mode 100644 drivers/soc/qcom/ramp_controller.c
>

I'd allow myself to re-ask the same questions here:

Generic question. regarding this controller. If it is supposed to work
close to DVCS, etc. Does ramp controller need any programming when
changing speed and/or APC voltage?
Is it necessary to turn ramp on and off during the runtime?

--
With best wishes
Dmitry

\
 
 \ /
  Last update: 2022-11-16 14:47    [W:0.059 / U:1.304 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site