lkml.org 
[lkml]   [2022]   [Nov]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 6/9] dt-bindings: Add RISC-V advanced PLIC bindings
On Fri, Nov 11, 2022 at 10:12:04AM +0530, Anup Patel wrote:
> We add DT bindings document for RISC-V advanced platform level interrupt
> controller (APLIC) defined by the RISC-V advanced interrupt architecture
> (AIA) specification.
>
> Signed-off-by: Anup Patel <apatel@ventanamicro.com>
> ---
> .../interrupt-controller/riscv,aplic.yaml | 136 ++++++++++++++++++
> 1 file changed, 136 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/interrupt-controller/riscv,aplic.yaml
>
> diff --git a/Documentation/devicetree/bindings/interrupt-controller/riscv,aplic.yaml b/Documentation/devicetree/bindings/interrupt-controller/riscv,aplic.yaml
> new file mode 100644
> index 000000000000..0aa48571f3bc
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/interrupt-controller/riscv,aplic.yaml
> @@ -0,0 +1,136 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/interrupt-controller/riscv,aplic.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: RISC-V Advancded Platform Level Interrupt Controller (APLIC)
> +
> +maintainers:
> + - Anup Patel <anup@brainfault.org>
> +
> +description:
> + The RISC-V advanced interrupt architecture (AIA) defines advanced platform
> + level interrupt controller (APLIC) for handling wired interrupts in a
> + RISC-V platform. The RISC-V AIA specification can be found at
> + https://github.com/riscv/riscv-aia.
> +
> + The RISC-V APLIC is implemented as hierarchical APLIC domains where all
> + interrupt sources connect to the root domain which can further delegate
> + interrupts to child domains. We have one device tree node for each APLIC
> + domain.
> +
> +allOf:
> + - $ref: /schemas/interrupt-controller.yaml#
> +
> +properties:
> + compatible:
> + items:
> + - enum:
> + - vendor,chip-aplic
> + - const: riscv,aplic
> +
> + reg:
> + maxItems: 1
> +
> + interrupt-controller: true
> +
> + "#interrupt-cells":
> + const: 2
> +
> + interrupts-extended:
> + minItems: 1
> + maxItems: 16384
> + description:
> + The presence of this property implies that given APLIC domain directly
> + injects external interrupts to a set of RISC-V HARTS (or CPUs). Each
> + node pointed to should be a riscv,cpu-intc node, which has a riscv node
> + (i.e. RISC-V HART) as parent.
> +
> + msi-parent:
> + description:
> + The presence of this property implies that given APLIC domain forwards
> + wired interrupts as MSIs to a AIA incoming message signaled interrupt
> + controller (IMSIC). This property should be considered only when the
> + interrupts-extended property is absent.
> +
> + riscv,num-sources:
> + $ref: "/schemas/types.yaml#/definitions/uint32"
> + minimum: 1
> + maximum: 1023
> + description:
> + Specifies how many wired interrupts are supported by this APLIC domain.
> +
> + riscv,children:
> + $ref: '/schemas/types.yaml#/definitions/phandle-array'
> + minItems: 1
> + maxItems: 1024

As each entry is a single phandle:

items:
maxItems: 1

> + description:
> + This property represents a list of child APLIC domains for the given
> + APLIC domain. Each child APLIC domain is assigned child index in
> + increasing order with the first child APLIC domain assigned child
> + index 0. The APLIC domain child index is used by firmware to delegate
> + interrupts from the given APLIC domain to a particular child APLIC
> + domain.
> +
> + riscv,delegate:
> + $ref: '/schemas/types.yaml#/definitions/phandle-array'
> + minItems: 1
> + maxItems: 1024

items:
items:
- description: child APLIC domain phandle
- description: ...
- description: ...

> + description:
> + This property represents a interrupt delegation list where each entry
> + is a triple consisting of child APLIC domain phandle, first interrupt
> + number, and last interrupt number. The firmware will configure interrupt
> + delegation registers based on interrupt delegation list.

First and last are inclusive?

Couldn't riscv,children and riscv,delegate be combined? How would they
be different? If some children don't have any delegated interrupts, you
could use -1 for the cells for example.

An example showing the need would be nice.

> +
> +additionalProperties: false
> +
> +required:
> + - compatible
> + - reg
> + - interrupt-controller
> + - "#interrupt-cells"
> + - riscv,num-sources
> +
> +examples:
> + - |
> + // Example 1 (APIC domain directly injecting interrupt to HARTs):

Is than an x86 APIC or a typo?

> +
> + aplic0: interrupt-controller@c000000 {
> + compatible = "vendor,chip-aplic", "riscv,aplic";
> + interrupts-extended = <&cpu1_intc 11>,
> + <&cpu2_intc 11>,
> + <&cpu3_intc 11>,
> + <&cpu4_intc 11>;
> + reg = <0xc000000 0x4080>;
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + riscv,num-sources = <63>;
> + riscv,children = <&aplic1>;
> + riscv,delegate = <&aplic1 1 63>;
> + };
> +
> + aplic1: interrupt-controller@d000000 {
> + compatible = "vendor,chip-aplic", "riscv,aplic";
> + interrupts-extended = <&cpu1_intc 9>,
> + <&cpu2_intc 9>,
> + <&cpu3_intc 9>,
> + <&cpu4_intc 9>;
> + reg = <0xd000000 0x4080>;
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + riscv,num-sources = <63>;
> + };
> +
> + - |
> + // Example 2 (APIC domain forwarding interrupts as MSIs):
> +
> + interrupt-controller@d000000 {
> + compatible = "vendor,chip-aplic", "riscv,aplic";
> + msi-parent = <&imsics>;
> + reg = <0xd000000 0x4000>;
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + riscv,num-sources = <63>;
> + };
> +...
> --
> 2.34.1
>
>

\
 
 \ /
  Last update: 2022-11-16 20:29    [W:0.418 / U:0.108 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site