lkml.org 
[lkml]   [2022]   [Nov]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH v7 3/3] xhci: tegra: USB2 pad power controls
From

On 11/11/2022 10:18, Jim Lin wrote:
> From: Petlozu Pravareshwar <petlozup@nvidia.com>
>
> Program USB2 pad PD controls during port connect/disconnect, port
> suspend/resume, and test mode, to reduce power consumption on
> disconnect or suspend.
>
> Signed-off-by: Petlozu Pravareshwar <petlozup@nvidia.com>
> Co-developed-by: Jim Lin <jilin@nvidia.com>
> Signed-off-by: Jim Lin <jilin@nvidia.com>
>
> ---
> v2: Fix issue that wrong tegra->phys[] may be accessed on tegra124
> v3: No change on copyright
> v4: Remove hcd_to_tegra_xusb() function which is used only once.
> v5: Update .hub_control in tegra_xhci_overrides (xhci-tegra.c)
> Invoke xhci_hub_control() directly (xhci-tegra.c)
> v6: Change author to Petlozu
> Changed from u32 to u8 for variable enable_utmi_pad_after_lp0_exit
> Modified tegra_xhci_disable_phy_wake(), tegra_xhci_program_utmi_power_lp0_exit(),
> tegra_xhci_hub_control()
> v7: no change
>
> drivers/usb/host/xhci-tegra.c | 125 ++++++++++++++++++++++++++++++++++
> 1 file changed, 125 insertions(+)
>
> diff --git a/drivers/usb/host/xhci-tegra.c b/drivers/usb/host/xhci-tegra.c
> index c8af2cd2216d..b5ed06ddbbac 100644
> --- a/drivers/usb/host/xhci-tegra.c
> +++ b/drivers/usb/host/xhci-tegra.c
> @@ -274,6 +274,7 @@ struct tegra_xusb {
>
> bool suspended;
> struct tegra_xusb_context context;
> + u8 lp0_utmi_pad_mask;
> };
>
> static struct hc_driver __read_mostly tegra_xhci_hc_driver;
> @@ -1951,10 +1952,24 @@ static void tegra_xhci_disable_phy_wake(struct tegra_xusb *tegra)
> struct tegra_xusb_padctl *padctl = tegra->padctl;
> unsigned int i;
>
> + for (i = 0; i < tegra->num_usb_phys; i++) {
> + struct phy *phy = tegra_xusb_get_phy(tegra, "usb2", i);
> +
> + if (!phy)
> + continue;
> +
> + if (tegra_xusb_padctl_remote_wake_detected(padctl, phy))
> + tegra_phy_xusb_utmi_pad_power_on(phy);
> + }
> +
> for (i = 0; i < tegra->num_phys; i++) {
> if (!tegra->phys[i])
> continue;
>
> + if (tegra_xusb_padctl_remote_wake_detected(padctl, tegra->phys[i]))
> + dev_dbg(tegra->dev, "%pOF remote wake detected\n",
> + tegra->phys[i]->dev.of_node);
> +
> tegra_xusb_padctl_disable_phy_wake(padctl, tegra->phys[i]);
> }
> }
> @@ -1972,6 +1987,28 @@ static void tegra_xhci_disable_phy_sleepwalk(struct tegra_xusb *tegra)
> }
> }
>
> +static void tegra_xhci_program_utmi_power_lp0_exit(struct tegra_xusb *tegra)
> +{
> + unsigned int i, index_to_usb2;
> + struct phy *phy;
> +
> + for (i = 0; i < tegra->soc->num_types; i++) {
> + if (strcmp(tegra->soc->phy_types[i].name, "usb2") == 0)
> + index_to_usb2 = i;
> + }
> +
> + for (i = 0; i < tegra->num_usb_phys; i++) {
> + if (!is_host_mode_phy(tegra, index_to_usb2, i))
> + continue;
> +
> + phy = tegra_xusb_get_phy(tegra, "usb2", i);
> + if (tegra->lp0_utmi_pad_mask & BIT(i))
> + tegra_phy_xusb_utmi_pad_power_on(phy);
> + else
> + tegra_phy_xusb_utmi_pad_power_down(phy);
> + }
> +}
> +
> static int tegra_xusb_enter_elpg(struct tegra_xusb *tegra, bool runtime)
> {
> struct xhci_hcd *xhci = hcd_to_xhci(tegra->hcd);
> @@ -1980,6 +2017,7 @@ static int tegra_xusb_enter_elpg(struct tegra_xusb *tegra, bool runtime)
> unsigned int i;
> int err;
> u32 usbcmd;
> + u32 portsc;
>
> dev_dbg(dev, "entering ELPG\n");
>
> @@ -1993,6 +2031,15 @@ static int tegra_xusb_enter_elpg(struct tegra_xusb *tegra, bool runtime)
> goto out;
> }
>
> + for (i = 0; i < tegra->num_usb_phys; i++) {
> + if (!xhci->usb2_rhub.ports[i])
> + continue;
> + portsc = readl(xhci->usb2_rhub.ports[i]->addr);
> + tegra->lp0_utmi_pad_mask &= ~BIT(i);
> + if (((portsc & PORT_PLS_MASK) == XDEV_U3) || ((portsc & DEV_SPEED_MASK) == XDEV_FS))
> + tegra->lp0_utmi_pad_mask |= BIT(i);
> + }
> +
> err = xhci_suspend(xhci, wakeup);
> if (err < 0) {
> dev_err(tegra->dev, "failed to suspend XHCI: %d\n", err);
> @@ -2066,6 +2113,8 @@ static int tegra_xusb_exit_elpg(struct tegra_xusb *tegra, bool runtime)
>
> phy_power_on(tegra->phys[i]);
> }
> + if (tegra->suspended)
> + tegra_xhci_program_utmi_power_lp0_exit(tegra);
>
> tegra_xusb_config(tegra);
> tegra_xusb_restore_context(tegra);
> @@ -2437,8 +2486,84 @@ static int tegra_xhci_setup(struct usb_hcd *hcd)
> return xhci_gen_setup(hcd, tegra_xhci_quirks);
> }
>
> +static int tegra_xhci_hub_control(struct usb_hcd *hcd, u16 type_req, u16 value, u16 index,
> + char *buf, u16 length)
> +{
> + struct tegra_xusb *tegra = dev_get_drvdata(hcd->self.controller);
> + struct xhci_hcd *xhci = hcd_to_xhci(hcd);
> + struct xhci_hub *rhub;
> + struct xhci_bus_state *bus_state;
> + int port = (index & 0xff) - 1;
> + unsigned int i;
> + struct xhci_port **ports;
> + u32 portsc;
> + int ret;
> + struct phy *phy;
> +
> + rhub = &xhci->usb2_rhub;
> + bus_state = &rhub->bus_state;
> + if (bus_state->resuming_ports && hcd->speed == HCD_USB2) {
> + ports = rhub->ports;
> + i = rhub->num_ports;
> + while (i--) {
> + if (!test_bit(i, &bus_state->resuming_ports))
> + continue;
> + portsc = readl(ports[i]->addr);
> + if ((portsc & PORT_PLS_MASK) == XDEV_RESUME)
> + tegra_phy_xusb_utmi_pad_power_on(
> + tegra_xusb_get_phy(tegra, "usb2", (int) i));
> + }
> + }
> +
> + if (hcd->speed == HCD_USB2) {
> + phy = tegra_xusb_get_phy(tegra, "usb2", port);
> + if ((type_req == ClearPortFeature) && (value == USB_PORT_FEAT_SUSPEND)) {
> + if (!index || index > rhub->num_ports)
> + return -EPIPE;
> + tegra_phy_xusb_utmi_pad_power_on(phy);
> + }
> + if ((type_req == SetPortFeature) && (value == USB_PORT_FEAT_RESET)) {
> + if (!index || index > rhub->num_ports)
> + return -EPIPE;
> + ports = rhub->ports;
> + portsc = readl(ports[port]->addr);
> + if (portsc & PORT_CONNECT)
> + tegra_phy_xusb_utmi_pad_power_on(phy);
> + }
> + }
> +
> + ret = xhci_hub_control(hcd, type_req, value, index, buf, length);
> + if (ret < 0)
> + return ret;
> +
> + if (hcd->speed == HCD_USB2) {
> + /* Use phy where we set previously */
> + if ((type_req == SetPortFeature) && (value == USB_PORT_FEAT_SUSPEND))
> + /* We don't suspend the PAD while HNP role swap happens on the OTG port */
> + if (!((hcd->self.otg_port == (port + 1)) && hcd->self.b_hnp_enable))
> + tegra_phy_xusb_utmi_pad_power_down(phy);
> +
> + if ((type_req == ClearPortFeature) && (value == USB_PORT_FEAT_C_CONNECTION)) {
> + ports = rhub->ports;
> + portsc = readl(ports[port]->addr);
> + if (!(portsc & PORT_CONNECT)) {
> + /* We don't suspend the PAD while HNP role swap happens on the OTG
> + * port
> + */
> + if (!((hcd->self.otg_port == (port + 1)) && hcd->self.b_hnp_enable))
> + tegra_phy_xusb_utmi_pad_power_down(phy);
> + }
> + }
> + if ((type_req == SetPortFeature) && (value == USB_PORT_FEAT_TEST))
> + tegra_phy_xusb_utmi_pad_power_on(phy);
> + }
> +
> + return ret;
> +}
> +
> static const struct xhci_driver_overrides tegra_xhci_overrides __initconst = {
> .reset = tegra_xhci_setup,
> + .hub_control = tegra_xhci_hub_control,
> };
>
> static int __init tegra_xusb_init(void)

Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Tested-by: Jon Hunter <jonathanh@nvidia.com>

Thanks
Jon

--
nvpublic

\
 
 \ /
  Last update: 2022-11-11 15:45    [W:0.237 / U:1.184 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site