lkml.org 
[lkml]   [2022]   [Jan]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v1 1/1] iio: adc: tsc2046: add .read_raw support
On Fri,  7 Jan 2022 10:35:27 +0100
Oleksij Rempel <o.rempel@pengutronix.de> wrote:

> Add read_raw() support to make use of iio_hwmon and other iio clients.
>
> Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Hi Oleksij

Main questions in here are around settling time and the interface used for that.

> ---
> drivers/iio/adc/ti-tsc2046.c | 114 ++++++++++++++++++++++++++++++++---
> 1 file changed, 106 insertions(+), 8 deletions(-)
>
> diff --git a/drivers/iio/adc/ti-tsc2046.c b/drivers/iio/adc/ti-tsc2046.c
> index 8126084616e6..55787d18e2cd 100644
> --- a/drivers/iio/adc/ti-tsc2046.c
> +++ b/drivers/iio/adc/ti-tsc2046.c
> @@ -82,6 +82,7 @@
> #define TI_TSC2046_DATA_12BIT GENMASK(14, 3)
>
> #define TI_TSC2046_MAX_CHAN 8
> +#define TI_TSC2046_INT_VREF 2500
>
> /* Represents a HW sample */
> struct tsc2046_adc_atom {
> @@ -178,6 +179,11 @@ struct tsc2046_adc_priv {
> .type = IIO_VOLTAGE, \
> .indexed = 1, \
> .channel = index, \
> + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | \
> + BIT(IIO_CHAN_INFO_OVERSAMPLING_RATIO) | \
> + BIT(IIO_CHAN_INFO_DEBOUNCE_COUNT) | \
> + BIT(IIO_CHAN_INFO_DEBOUNCE_TIME), \
> + .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE), \
> .datasheet_name = "#name", \
> .scan_index = index, \
> .scan_type = { \
> @@ -241,6 +247,14 @@ static u8 tsc2046_adc_get_cmd(struct tsc2046_adc_priv *priv, int ch_idx,
> else
> pd = 0;
>
> + switch (ch_idx) {
> + case TI_TSC2046_ADDR_TEMP1:
> + case TI_TSC2046_ADDR_AUX:
> + case TI_TSC2046_ADDR_VBAT:
> + case TI_TSC2046_ADDR_TEMP0:
> + pd |= TI_TSC2046_SER | TI_TSC2046_PD1_VREF_ON;
> + }
> +
> return TI_TSC2046_START | FIELD_PREP(TI_TSC2046_ADDR, ch_idx) | pd;
> }
>
> @@ -252,16 +266,47 @@ static u16 tsc2046_adc_get_value(struct tsc2046_adc_atom *buf)
> static int tsc2046_adc_read_one(struct tsc2046_adc_priv *priv, int ch_idx,
> u32 *effective_speed_hz)
> {
> + struct tsc2046_adc_ch_cfg *ch = &priv->ch_cfg[ch_idx];
> + struct tsc2046_adc_atom *rx_buf, *tx_buf;
> + unsigned int val, val_normalized = 0;
> + int ret, i, count_skip = 0, max_count;
> struct spi_transfer xfer;
> struct spi_message msg;
> - int ret;
> + u8 cmd;
> +
> + if (!effective_speed_hz) {
> + count_skip = tsc2046_adc_time_to_count(priv, ch->settling_time_us);
> + max_count = count_skip + ch->oversampling_ratio;
> + } else {
> + max_count = 1;
> + }
> +
> + tx_buf = kcalloc(max_count, sizeof(*tx_buf), GFP_KERNEL);
> + if (!tx_buf)
> + return -ENOMEM;
> +
> + rx_buf = kcalloc(max_count, sizeof(*rx_buf), GFP_KERNEL);
> + if (!rx_buf) {
> + ret = -ENOMEM;
> + goto free_tx;
> + }

I guess these are fine to do everytime because you expect this to be used in
paths which aren't called at a particularly high frequency?

These buffers could get rather large so maybe you need a cap on settling time?


> +
> + /*
> + * Do not enable automatic power down on working samples. Otherwise the
> + * plates will never be completely charged.
> + */
> + cmd = tsc2046_adc_get_cmd(priv, ch_idx, true);
> +
> + for (i = 0; i < max_count - 1; i++)
> + tx_buf[i].cmd = cmd;
> +
> + /* automatically power down on last sample */
> + tx_buf[i].cmd = tsc2046_adc_get_cmd(priv, ch_idx, false);
>
> memset(&xfer, 0, sizeof(xfer));
> - priv->tx_one->cmd = tsc2046_adc_get_cmd(priv, ch_idx, false);
> - priv->tx_one->data = 0;
> - xfer.tx_buf = priv->tx_one;
> - xfer.rx_buf = priv->rx_one;

Are these used for anything else? If not probably need to drop them and
their allocation.

> - xfer.len = sizeof(*priv->tx_one);
> + xfer.tx_buf = tx_buf;
> + xfer.rx_buf = rx_buf;
> + xfer.len = sizeof(*tx_buf) * max_count;

This could be very big and more than possible some spi controllers will fail
it (or does the SPI core handle splitting very large transfers?) Maybe a loop
is needed with smaller fixed size transfers?

> spi_message_init_with_transfers(&msg, &xfer, 1);
>
> /*
> @@ -272,13 +317,25 @@ static int tsc2046_adc_read_one(struct tsc2046_adc_priv *priv, int ch_idx,
> if (ret) {
> dev_err_ratelimited(&priv->spi->dev, "SPI transfer failed %pe\n",
> ERR_PTR(ret));
> - return ret;
> + goto free_bufs;
> }
>
> if (effective_speed_hz)
> *effective_speed_hz = xfer.effective_speed_hz;
>
> - return tsc2046_adc_get_value(priv->rx_one);
> + for (i = 0; i < max_count - count_skip; i++) {
> + val = tsc2046_adc_get_value(&rx_buf[count_skip + i]);
> + val_normalized += val;
> + }
> +
> + ret = DIV_ROUND_UP(val_normalized, max_count - count_skip);
> +
> +free_bufs:
> + kfree(rx_buf);
> +free_tx:
> + kfree(tx_buf);
> +
> + return ret;
> }
>
> static size_t tsc2046_adc_group_set_layout(struct tsc2046_adc_priv *priv,
> @@ -385,6 +442,46 @@ static irqreturn_t tsc2046_adc_trigger_handler(int irq, void *p)
> return IRQ_HANDLED;
> }
>
> +static int tsc2046_adc_read_raw(struct iio_dev *indio_dev,
> + struct iio_chan_spec const *chan,
> + int *val, int *val2, long m)
> +{
> + struct tsc2046_adc_priv *priv = iio_priv(indio_dev);
> + int ret;
> +
> + switch (m) {
> + case IIO_CHAN_INFO_RAW:
> + ret = tsc2046_adc_read_one(priv, chan->channel, NULL);
> + if (ret < 0)
> + return ret;
> +
> + *val = ret;
> +
> + return IIO_VAL_INT;
> + case IIO_CHAN_INFO_SCALE:
> + /*
> + * Note: the TSC2046 has internal voltage divider on the VBAT
> + * line. This divider can be influenced by external divider.
> + * So, it is better to use external voltage-divider.
> + */
> + *val = TI_TSC2046_INT_VREF;
> + *val2 = chan->scan_type.realbits;
> + return IIO_VAL_FRACTIONAL_LOG2;
> + case IIO_CHAN_INFO_OVERSAMPLING_RATIO:
> + *val = priv->ch_cfg[chan->channel].oversampling_ratio;
> + return IIO_VAL_INT;
> + case IIO_CHAN_INFO_DEBOUNCE_COUNT:

These are unusual. I think they've only been used for the more literal bounce suppression
of a human step counting algorithm.

I'd probably not expect to see the both even if we decide this is applicable.

> + *val = tsc2046_adc_time_to_count(priv,
> + priv->ch_cfg[chan->channel].settling_time_us);

Setting time is often about external circuitry so it's a bit unusual to expose
it to userspace rather than making it a device tree property and just making
sure the driver doesn't provide a reading until appropriate debounce has passed.
Here is coming from DT anyway, so what benefit do these two read only channel
properties provide?

> + return IIO_VAL_INT;
> + case IIO_CHAN_INFO_DEBOUNCE_TIME:
> + *val = priv->ch_cfg[chan->channel].settling_time_us;
> + return IIO_VAL_INT;
> + }
> +
> + return -EINVAL;
> +}
> +
> static int tsc2046_adc_update_scan_mode(struct iio_dev *indio_dev,
> const unsigned long *active_scan_mask)
> {
> @@ -415,6 +512,7 @@ static int tsc2046_adc_update_scan_mode(struct iio_dev *indio_dev,
> }
>
> static const struct iio_info tsc2046_adc_info = {
> + .read_raw = tsc2046_adc_read_raw,
> .update_scan_mode = tsc2046_adc_update_scan_mode,
> };
>

\
 
 \ /
  Last update: 2022-01-09 16:55    [W:0.084 / U:0.180 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site