lkml.org 
[lkml]   [2022]   [Jan]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH v9 0/3] mmc: Add LiteSDCard mmc driver
Date
Add support for the LiteX SD-Card device, LiteSDCard.

LiteSDCard is a simple SD-Card interface available as part of the LiteX
environment, used with various RISC-V and other FPGA based SoCs.

New in v9:

drivers/mmc/host/Kconfig:
- fix OF dependency
drivers/mmc/host/litex_mmc.c:
- remove `linux/of.h` include, no longer needed since dropping
`of_match_ptr()`
- add `linux/mod_devicetable.h` include
- use devm_action_or_reset() to devm-ify mmc_alloc_host(), and obviate
the need to call mmc_free_host() explicitly during either probe()
error path or during remove()

>New in v8:
>commit blurbs:
> - cosmetic editing of descriptions
> - removed `Cc:` lines
>drivers/mmc/host/litex_mmc.c:
> - fix file header comment (for real, this time)
> - add explicit `bits.h` include
> - remove `of_match_ptr()` wrapper from around .of_match_table argument
> - fix devm ordering issues: use `devm_request_irq()`, which precludes
> the need to call `free_irq()` on `probe()` error path or from `remove()`
>
>>New in v7:
>>
>>drivers/mmc/host/Kconfig:
>> - added module name in LiteSDCard Kconfig entry
>>
>>drivers/mmc/host/litex_mmc.c:
>> - fixed comment formatting, ordering, and capitalization throughout
>> the entire file
>> - sorted header #include statements
>> - removed redundant parantheses in readx_poll_timeout() condition
>> - explicit handling of readx_poll_timeout() timeout scenarios
>> - dev_err() used in litex_mmc_sdcard_wait_done()
>> - use memcpy_fromio() to grab command response
>> - no need to apply 0xffff mask to a 32-bit value right-shifted by 16
>> (host->resp[3])
>> - use clamp() instead of min(max(...)...)
>> - reworked platform_get_irq_optional() error handling logic
>> - no need to explicitly zero host->irq, kzalloc() does that already
>> - added missing free_irq() in litex_mmc_probe() error path
>> - reordered calls inside litex_mmc_remove() (calling mmc_free_host()
>> before free_irq()
>>
>>>New in v6:
>>>
>>>drivers/mmc/host/litex_mmc.c:
>>> - fix handling of deferred probe vs. platform_get_irq_optional()
>>> - don't #ifdef dma_set_mask_and_coherent(), since it automatically
>>> does the right thing on both 32- and 64-bit DMA capable arches
>>> - remove MMC_CAP2_FULL_PWR_CYCLE, add MMC_CAP2_NO_MMC to list of
>>> hardcoded capabilities during litex_mmc_probe()
>>> - hardcode mmc->ocr_avail to the full 2.7-3.6V range allowed by the
>>> SDCard spec (the LiteSDCard device doesn't accept software
>>> configuration)
>>>
>>>>New in v5:
>>>>
>>>>MAINTAINERS:
>>>>
>>>> - picked up a/b Mateusz
>>>>
>>>>Doc/dt/bindings/mmc/litex,mmc.yaml:
>>>>
>>>> - picked up r/b Rob, Joel
>>>>
>>>>drivers/mmc/host/litex_mmc.c:
>>>>
>>>> - shorten #define constant names (cosmetic, make them less unwieldy)
>>>> - picked up r/b Joel
>>>>
>>>>>New in v4:
>>>>>
>>>>>Doc/dt/bindings/mmc/litex,mmc.yaml:
>>>>>
>>>>> - fixed `dt_binding_check` errors uncovered by Rob's script
>>>>>
>>>>>drivers/mmc/host/litex_mmc.c:
>>>>>
>>>>> - struct litex_mmc_host fields re-ordered so that `pahole` reports
>>>>> no holes in either 32- or 64-bit builds
>>>>> - litex_mmc_set_bus_width() now encapsulates check for
>>>>> host->is_bus_width_set
>>>>> - litex_mmc_request() - factor out dma data setup into separate
>>>>> helper function: litex_mmc_do_dma()
>>>>>
>>>>>>New in v3:
>>>>>>
>>>>>> MAINTAINERS:
>>>>>>
>>>>>> - picked up acked-by Joel
>>>>>> - added listing for liteeth driver
>>>>>> - added Joel as additional co-maintainer (thanks!)
>>>>>>
>>>>>> Doc/dt/bindings/mmc/litex,mmc.yaml:
>>>>>>
>>>>>> - picked up r/b Geert Uytterhoeven <geert@linux-m68k.org> in DT
>>>>>> bindings document (please let me know if that was premature, and
>>>>>> happy to take further review if needed :)
>>>>>> - add dedicated DT property for source clock frequency
>>>>>>
>>>>>> drivers/mmc/host/litex_mmc.c:
>>>>>>
>>>>>> - fixed function signature (no line split), and naming (litex_mmc_*)
>>>>>> - more informative MODULE_AUTHOR() entries
>>>>>> - also added matching "Copyright" entries in file header
>>>>>> - fixed description in Kconfig
>>>>>> - fixed DT documentation
>>>>>> - removed magic constants
>>>>>> - removed litex_map_status(), have sdcard_wait_done() return *real*
>>>>>> error codes directly instead.
>>>>>> - streamlined litex_mmc_reponse_len()
>>>>>> - call litex_mmc_set_bus_width() only once, and ensure it returns
>>>>>> correct error code(s)
>>>>>> - use readx_poll_timeout() -- more concise -- instead of
>>>>>> read_poll_timeout()
>>>>>> - use dev_err() in litex_mmc_send_cmd() (instead of pr_err())
>>>>>> - litex_mmc_setclk() will update host->clock before returning
>>>>>> - separate irq initialization into its own function,
>>>>>> litex_mmc_irq_init()
>>>>>> - document rationale for f_min, f_max
>>>>>> - use dmam_alloc_coherent(), which simplifies cleanup significantly
>>>>>> - large `if (data) { ... }` block in litex_mmc_request() left as-is,
>>>>>> there are too many variables shared with the rest of the parent
>>>>>> function body to easily separate (e.g., `len`, `transfer`, `direct`).
>>>>>> If this is indeed a blocker, I can take another shot at refactoring
>>>>>> it in a future revision!
>>>>>> - bump dma_set_mask_and_coherent() to 64-bits on suitable
>>>>>> architectures
>>>>>> - clock source picked up from dedicated DT clock reference property
>>>>>> - remove gpio card-detect logic (needs testing and a dt binding
>>>>>> example before being eligible for upstream inclusion)
>>>>>>
>>>>>>> New in v2:
>>>>>>> - reword info message in litex_set_clk()
>>>>>>> - streamline code in litex_map_status()
>>>>>>> - fix typos in Kconfig (thanks Randy Dunlap <rdunlap@infradead.org>)
>>>>>>> - improvements suggested by Stafford Horne <shorne@gmail.com>
>>>>>>> - allow COMPILE_TEST in Kconfig
>>>>>>> - use read_poll_timeout() when waiting for cmd/data/DMA
>>>>>>> xfer completion
>>>>>>> - include interrupt.h (thanks kernel test robot <lkp@intel.com>)

Gabriel Somlo (3):
MAINTAINERS: co-maintain LiteX platform
dt-bindings: mmc: Add bindings for LiteSDCard
mmc: Add driver for LiteX's LiteSDCard interface

.../devicetree/bindings/mmc/litex,mmc.yaml | 72 ++
MAINTAINERS | 9 +-
drivers/mmc/host/Kconfig | 9 +
drivers/mmc/host/Makefile | 1 +
drivers/mmc/host/litex_mmc.c | 654 ++++++++++++++++++
5 files changed, 743 insertions(+), 2 deletions(-)
create mode 100644 Documentation/devicetree/bindings/mmc/litex,mmc.yaml
create mode 100644 drivers/mmc/host/litex_mmc.c

--
2.31.1

\
 
 \ /
  Last update: 2022-01-08 17:13    [W:0.109 / U:0.304 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site