lkml.org 
[lkml]   [2022]   [Jan]   [6]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
SubjectRe: [PATCH] mtd: rawnand: meson: fix the clock after discarding sd_emmc_c_clkc
From
Hi Miquel,

Meson NFC clock depends on the implementation of sd_emmc_c_clkc, but i
don't find the commit in
linux mainline. then the information i got from
[jianxin.pan@amlogic.com] is the rejection of
serial patches. I just look into the corresponding emails in link:

https://lore.kernel.org/all/86789d73-5a6c-7729-ecd1-dcd342b2fcde@amlogic.com/
it seems the patch never go on since V6, so [jianxin.pan@amlogic.com],
could you help to clear it?
let us address the discussion in another email from [jbrunet@baylibre.com].

On 2022/1/6 16:08, Miquel Raynal wrote:
> [ EXTERNAL EMAIL ]
>
> Hi Liang,
>
> liang.yang@amlogic.com wrote on Thu, 6 Jan 2022 11:25:04 +0800:
>
>> Because EMMC and NAND have the same control clock register, so we
>> implement a 'sd_emmc_c_clkc'. Previously DTS is defined as below:
>>
>> sd_emmc_c_clkc: mmc@7000 {
>> compatible = "amlogic,meson-axg-mmc-clkc", "syscon";
>> reg = <0x0 0x7000 0x0 0x800>;
>> };
>>
>> nand-controller@7800 {
>> ......
>>
>> clocks = <&clkc CLKID_SD_EMMC_C>,
>> <&sd_emmc_c_clkc CLKID_MMC_DIV>,
>> <&sd_emmc_c_clkc CLKID_MMC_PHASE_RX>,
>> <&sd_emmc_c_clkc CLKID_MMC_PHASE_TX>;
>> clock-names = "core", "device", "rx", "tx";
>> amlogic,mmc-syscon = <&sd_emmc_c_clkc>;
>>
>> ......
>> }
>>
>> but in fact, above implementation is rejected. so now registering
>> a nand_divider.
>
> What is rejected?
> Why is it rejected?
> What is nand_divider?
i simplify our clock framework below, so nand divider is
SD_EMMC_CLOCK[5:0] here.
----- ----- -----
the other------| \ | | | |
| mux | ----- | N | ----------| NFC/|
FCLK_DIV2------| | | | | EMMC|
-----/ ----- -----
SD_EMMC_CLOCK[7:6] SD_EMMC_CLOCK[5:0]
>
>
>>
>> Change-Id: Ibeb4c7ff886f5886aac4d6c664d7bbd1b1bcb997
>
> Change Ids are not expected in the upstream kernel.
>
> But if you fix something you should have a Fixes:.
>
>> Signed-off-by: Liang Yang <liang.yang@amlogic.com>
>> ---
>> drivers/mtd/nand/raw/meson_nand.c | 88 +++++++++++++++++--------------
>> 1 file changed, 49 insertions(+), 39 deletions(-)
>>
>> diff --git a/drivers/mtd/nand/raw/meson_nand.c b/drivers/mtd/nand/raw/meson_nand.c
>> index ac3be92872d0..4472363059c2 100644
>> --- a/drivers/mtd/nand/raw/meson_nand.c
>> +++ b/drivers/mtd/nand/raw/meson_nand.c
>> @@ -2,7 +2,7 @@
>> /*
>> * Amlogic Meson Nand Flash Controller Driver
>> *
>> - * Copyright (c) 2018 Amlogic, inc.
>> + * Copyright (c) 2018-2021 Amlogic, inc.
>> * Author: Liang Yang <liang.yang@amlogic.com>
>> */
>>
>> @@ -10,6 +10,7 @@
>> #include <linux/dma-mapping.h>
>> #include <linux/interrupt.h>
>> #include <linux/clk.h>
>> +#include <linux/clk-provider.h>
>> #include <linux/mtd/rawnand.h>
>> #include <linux/mtd/mtd.h>
>> #include <linux/mfd/syscon.h>
>> @@ -55,6 +56,7 @@
>> #define NFC_REG_VER 0x38
>>
>> #define NFC_RB_IRQ_EN BIT(21)
>> +#define NFC_CMD_FIFO_RESET BIT(31)
>>
>> #define CMDRWGEN(cmd_dir, ran, bch, short_mode, page_size, pages) \
>> ( \
>> @@ -104,6 +106,9 @@
>>
>> #define PER_INFO_BYTE 8
>>
>> +#define CLK_DIV_SHIFT 0
>> +#define CLK_DIV_WIDTH 6
>> +
>> struct meson_nfc_nand_chip {
>> struct list_head node;
>> struct nand_chip nand;
>> @@ -151,15 +156,15 @@ struct meson_nfc {
>> struct nand_controller controller;
>> struct clk *core_clk;
>> struct clk *device_clk;
>> - struct clk *phase_tx;
>> - struct clk *phase_rx;
>> + struct clk *nand_clk;
>> + struct clk_divider nand_divider;
>>
>> unsigned long clk_rate;
>> u32 bus_timing;
>>
>> struct device *dev;
>> void __iomem *reg_base;
>> - struct regmap *reg_clk;
>> + void __iomem *reg_clk;
>> struct completion completion;
>> struct list_head chips;
>> const struct meson_nfc_data *data;
>> @@ -406,12 +411,14 @@ static int meson_nfc_queue_rb(struct meson_nfc *nfc, int timeout_ms)
>> cmd = NFC_CMD_RB | NFC_CMD_RB_INT
>> | nfc->param.chip_select | nfc->timing.tbers_max;
>> writel(cmd, nfc->reg_base + NFC_REG_CMD);
>> -
>> + meson_nfc_drain_cmd(nfc);
>> ret = wait_for_completion_timeout(&nfc->completion,
>> msecs_to_jiffies(timeout_ms));
>> if (ret == 0)
>> ret = -1;
>>
>> + /* reset command fifo to avoid lock */
>> + writel(NFC_CMD_FIFO_RESET, nfc->reg_base + NFC_REG_CMD);
>> return ret;
>> }
>>
>> @@ -988,8 +995,9 @@ static const struct mtd_ooblayout_ops meson_ooblayout_ops = {
>> static int meson_nfc_clk_init(struct meson_nfc *nfc)
>> {
>> int ret;
>> + struct clk_init_data init = {0};
>> + const char *fix_div2_pll_name[1];
>>
>> - /* request core clock */
>> nfc->core_clk = devm_clk_get(nfc->dev, "core");
>> if (IS_ERR(nfc->core_clk)) {
>> dev_err(nfc->dev, "failed to get core clock\n");
>> @@ -1002,21 +1010,25 @@ static int meson_nfc_clk_init(struct meson_nfc *nfc)
>> return PTR_ERR(nfc->device_clk);
>> }
>>
>> - nfc->phase_tx = devm_clk_get(nfc->dev, "tx");
>> - if (IS_ERR(nfc->phase_tx)) {
>> - dev_err(nfc->dev, "failed to get TX clk\n");
>> - return PTR_ERR(nfc->phase_tx);
>> - }
>> -
>> - nfc->phase_rx = devm_clk_get(nfc->dev, "rx");
>> - if (IS_ERR(nfc->phase_rx)) {
>> - dev_err(nfc->dev, "failed to get RX clk\n");
>> - return PTR_ERR(nfc->phase_rx);
>> - }
>> + init.name = devm_kstrdup(nfc->dev, "nfc#div", GFP_KERNEL);
>> + init.ops = &clk_divider_ops;
>> + fix_div2_pll_name[0] = __clk_get_name(nfc->device_clk);
>> + init.parent_names = fix_div2_pll_name;
>> + init.num_parents = 1;
>> + nfc->nand_divider.reg = nfc->reg_clk;
>> + nfc->nand_divider.shift = CLK_DIV_SHIFT;
>> + nfc->nand_divider.width = CLK_DIV_WIDTH;
>> + nfc->nand_divider.hw.init = &init;
>> + nfc->nand_divider.flags = CLK_DIVIDER_ONE_BASED |
>> + CLK_DIVIDER_ROUND_CLOSEST |
>> + CLK_DIVIDER_ALLOW_ZERO;
>> +
>> + nfc->nand_clk = devm_clk_register(nfc->dev, &nfc->nand_divider.hw);
>> + if (IS_ERR(nfc->nand_clk))
>> + return PTR_ERR(nfc->nand_clk);
>>
>> /* init SD_EMMC_CLOCK to sane defaults w/min clock rate */
>> - regmap_update_bits(nfc->reg_clk,
>> - 0, CLK_SELECT_NAND, CLK_SELECT_NAND);
>> + writel(CLK_SELECT_NAND | readl(nfc->reg_clk), nfc->reg_clk);
>>
>> ret = clk_prepare_enable(nfc->core_clk);
>> if (ret) {
>> @@ -1030,29 +1042,21 @@ static int meson_nfc_clk_init(struct meson_nfc *nfc)
>> goto err_device_clk;
>> }
>>
>> - ret = clk_prepare_enable(nfc->phase_tx);
>> + ret = clk_prepare_enable(nfc->nand_clk);
>> if (ret) {
>> - dev_err(nfc->dev, "failed to enable TX clock\n");
>> - goto err_phase_tx;
>> - }
>> -
>> - ret = clk_prepare_enable(nfc->phase_rx);
>> - if (ret) {
>> - dev_err(nfc->dev, "failed to enable RX clock\n");
>> - goto err_phase_rx;
>> + dev_err(nfc->dev, "pre enable NFC divider fail\n");
>> + goto err_nand_clk;
>> }
>>
>> ret = clk_set_rate(nfc->device_clk, 24000000);
>> if (ret)
>> - goto err_disable_rx;
>> + goto err_disable_clk;
>>
>> return 0;
>>
>> -err_disable_rx:
>> - clk_disable_unprepare(nfc->phase_rx);
>> -err_phase_rx:
>> - clk_disable_unprepare(nfc->phase_tx);
>> -err_phase_tx:
>> +err_disable_clk:
>> + clk_disable_unprepare(nfc->nand_clk);
>> +err_nand_clk:
>> clk_disable_unprepare(nfc->device_clk);
>> err_device_clk:
>> clk_disable_unprepare(nfc->core_clk);
>> @@ -1061,8 +1065,7 @@ static int meson_nfc_clk_init(struct meson_nfc *nfc)
>>
>> static void meson_nfc_disable_clk(struct meson_nfc *nfc)
>> {
>> - clk_disable_unprepare(nfc->phase_rx);
>> - clk_disable_unprepare(nfc->phase_tx);
>> + clk_disable_unprepare(nfc->nand_clk);
>> clk_disable_unprepare(nfc->device_clk);
>> clk_disable_unprepare(nfc->core_clk);
>> }
>> @@ -1375,6 +1378,7 @@ static int meson_nfc_probe(struct platform_device *pdev)
>> struct device *dev = &pdev->dev;
>> struct meson_nfc *nfc;
>> struct resource *res;
>> + u32 ext_clk_reg;
>> int ret, irq;
>>
>> nfc = devm_kzalloc(dev, sizeof(*nfc), GFP_KERNEL);
>> @@ -1396,9 +1400,15 @@ static int meson_nfc_probe(struct platform_device *pdev)
>> if (IS_ERR(nfc->reg_base))
>> return PTR_ERR(nfc->reg_base);
>>
>> - nfc->reg_clk =
>> - syscon_regmap_lookup_by_phandle(dev->of_node,
>> - "amlogic,mmc-syscon");
>> + ret = of_property_read_u32(pdev->dev.of_node,
>> + "sd_emmc_c_clkc",
>> + &ext_clk_reg);
>> + if (ret) {
>> + dev_err(dev, "failed to get NAND external clock register\n");
>> + return ret;
>> + }
>> +
>> + nfc->reg_clk = devm_ioremap(&pdev->dev, ext_clk_reg, sizeof(int));
>> if (IS_ERR(nfc->reg_clk)) {
>> dev_err(dev, "Failed to lookup clock base\n");
>> return PTR_ERR(nfc->reg_clk);
>
>
> Thanks,
> Miquèl
>
> .

\
 
 \ /
  Last update: 2022-01-07 03:41    [W:2.256 / U:0.008 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site