lkml.org 
[lkml]   [2022]   [Jan]   [6]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
SubjectRe: [PATCH 10/11] PCI: mvebu: Implement support for legacy INTx interrupts
On Thu, 06 Jan 2022 16:27:44 +0000
Marc Zyngier <maz@kernel.org> wrote:

> On Thu, 06 Jan 2022 16:20:47 +0000,
> Pali Rohár <pali@kernel.org> wrote:
> >
> > On Thursday 06 January 2022 15:55:11 Marc Zyngier wrote:
> > > On Thu, 06 Jan 2022 15:44:47 +0000,
> > > Pali Rohár <pali@kernel.org> wrote:
> > > >
> > > > On Thursday 06 January 2022 15:28:20 Marc Zyngier wrote:
> > > > > On Wed, 05 Jan 2022 15:02:38 +0000,
> > > > > Pali Rohár <pali@kernel.org> wrote:
> > > > > >
> > > > > > This adds support for legacy INTx interrupts received from other PCIe
> > > > > > devices and which are reported by a new INTx irq chip.
> > > > > >
> > > > > > With this change, kernel can distinguish between INTA, INTB, INTC and INTD
> > > > > > interrupts.
> > > > > >
> > > > > > Note that for this support, device tree files has to be properly adjusted
> > > > > > to provide "interrupts" or "interrupts-extended" property with intx
> > > > > > interrupt source, "interrupt-names" property with "intx" string and also
> > > > > > 'interrupt-controller' subnode must be defined.
> > > > > >
> > > > > > If device tree files do not provide these nodes then driver would work as
> > > > > > before.
> > > > > >
> > > > > > Signed-off-by: Pali Rohár <pali@kernel.org>
> > > > > > ---
> > > > > > drivers/pci/controller/pci-mvebu.c | 182 +++++++++++++++++++++++++++--
> > > > > > 1 file changed, 174 insertions(+), 8 deletions(-)
> > > > > >
> > > > > > diff --git a/drivers/pci/controller/pci-mvebu.c b/drivers/pci/controller/pci-mvebu.c
> > > > > > index 1e90ab888075..04bcdd7b7a6d 100644
> > > > > > --- a/drivers/pci/controller/pci-mvebu.c
> > > > > > +++ b/drivers/pci/controller/pci-mvebu.c
> > > > > > @@ -54,9 +54,10 @@
> > > > > > PCIE_CONF_ADDR_EN)
> > > > > > #define PCIE_CONF_DATA_OFF 0x18fc
> > > > > > #define PCIE_INT_CAUSE_OFF 0x1900
> > > > > > +#define PCIE_INT_UNMASK_OFF 0x1910
> > > > > > +#define PCIE_INT_INTX(i) BIT(24+i)
> > > > > > #define PCIE_INT_PM_PME BIT(28)
> > > > > > -#define PCIE_MASK_OFF 0x1910
> > > > > > -#define PCIE_MASK_ENABLE_INTS 0x0f000000
> > > > > > +#define PCIE_INT_ALL_MASK GENMASK(31, 0)
> > > > > > #define PCIE_CTRL_OFF 0x1a00
> > > > > > #define PCIE_CTRL_X1_MODE 0x0001
> > > > > > #define PCIE_CTRL_RC_MODE BIT(1)
> > > > > > @@ -110,6 +111,10 @@ struct mvebu_pcie_port {
> > > > > > struct mvebu_pcie_window iowin;
> > > > > > u32 saved_pcie_stat;
> > > > > > struct resource regs;
> > > > > > + struct irq_domain *intx_irq_domain;
> > > > > > + struct irq_chip intx_irq_chip;
> > > > >
> > > > > Why is this structure per port? It really should be global. Printing
> > > > > the port number in the name isn't enough of a reason.
> > > >
> > > > Because each port has its own independent set of INTA-INTD
> > > > interrupts.
> > >
> > > That doesn't warrant a copy of an irq_chip structure that contains the
> > > exact same callbacks, and only differs by *a string*. And the use of
> > > this string is only to end-up in /proc/interrupts, which is totally
> > > pointless.
> > >
> > > >
> > > > > > + raw_spinlock_t irq_lock;
> > > > > > + int intx_irq;
> > > > > > };
> > > > > >
> > > > > > static inline void mvebu_writel(struct mvebu_pcie_port *port, u32 val, u32 reg)
> > > > > > @@ -235,7 +240,7 @@ static void mvebu_pcie_setup_wins(struct mvebu_pcie_port *port)
> > > > > >
> > > > > > static void mvebu_pcie_setup_hw(struct mvebu_pcie_port *port)
> > > > > > {
> > > > > > - u32 ctrl, lnkcap, cmd, dev_rev, mask;
> > > > > > + u32 ctrl, lnkcap, cmd, dev_rev, unmask;
> > > > > >
> > > > > > /* Setup PCIe controller to Root Complex mode. */
> > > > > > ctrl = mvebu_readl(port, PCIE_CTRL_OFF);
> > > > > > @@ -288,10 +293,30 @@ static void mvebu_pcie_setup_hw(struct mvebu_pcie_port *port)
> > > > > > /* Point PCIe unit MBUS decode windows to DRAM space. */
> > > > > > mvebu_pcie_setup_wins(port);
> > > > > >
> > > > > > - /* Enable interrupt lines A-D. */
> > > > > > - mask = mvebu_readl(port, PCIE_MASK_OFF);
> > > > > > - mask |= PCIE_MASK_ENABLE_INTS;
> > > > > > - mvebu_writel(port, mask, PCIE_MASK_OFF);
> > > > > > + /* Mask all interrupt sources. */
> > > > > > + mvebu_writel(port, ~PCIE_INT_ALL_MASK, PCIE_INT_UNMASK_OFF);
> > > > > > +
> > > > > > + /* Clear all interrupt causes. */
> > > > > > + mvebu_writel(port, ~PCIE_INT_ALL_MASK, PCIE_INT_CAUSE_OFF);
> > > > > > +
> > > > > > + if (port->intx_irq <= 0) {
> > > > > > + /*
> > > > > > + * When neither "summary" interrupt, nor "intx" interrupt was
> > > > > > + * specified in DT then unmask all legacy INTx interrupts as in
> > > > > > + * this case driver does not provide a way for masking and
> > > > > > + * unmasking of individual legacy INTx interrupts. In this case
> > > > > > + * all interrupts, including legacy INTx are reported via one
> > > > > > + * shared GIC source and therefore kernel cannot distinguish
> > > > > > + * which individual legacy INTx was triggered. These interrupts
> > > > > > + * are shared, so it should not cause any issue. Just
> > > > > > + * performance penalty as every PCIe interrupt handler needs to
> > > > > > + * be called when some interrupt is triggered.
> > > > > > + */
> > > > > > + unmask = mvebu_readl(port, PCIE_INT_UNMASK_OFF);
> > > > > > + unmask |= PCIE_INT_INTX(0) | PCIE_INT_INTX(1) |
> > > > > > + PCIE_INT_INTX(2) | PCIE_INT_INTX(3);
> > > > > > + mvebu_writel(port, unmask, PCIE_INT_UNMASK_OFF);
> > > > >
> > > > > Maybe worth printing a warning here, so that the user knows they are
> > > > > on thin ice.
> > > >
> > > > Ok. I can add it here. Anyway, this is default current state without
> > > > this patch.
> > > >
> > > > > > + }
> > > > > > }
> > > > > >
> > > > > > static struct mvebu_pcie_port *mvebu_pcie_find_port(struct mvebu_pcie *pcie,
> > > > > > @@ -924,6 +949,109 @@ static struct pci_ops mvebu_pcie_ops = {
> > > > > > .write = mvebu_pcie_wr_conf,
> > > > > > };
> > > > > >
> > > > > > +static void mvebu_pcie_intx_irq_mask(struct irq_data *d)
> > > > > > +{
> > > > > > + struct mvebu_pcie_port *port = d->domain->host_data;
> > > > > > + irq_hw_number_t hwirq = irqd_to_hwirq(d);
> > > > > > + unsigned long flags;
> > > > > > + u32 unmask;
> > > > > > +
> > > > > > + raw_spin_lock_irqsave(&port->irq_lock, flags);
> > > > > > + unmask = mvebu_readl(port, PCIE_INT_UNMASK_OFF);
> > > > > > + unmask &= ~PCIE_INT_INTX(hwirq);
> > > > > > + mvebu_writel(port, unmask, PCIE_INT_UNMASK_OFF);
> > > > > > + raw_spin_unlock_irqrestore(&port->irq_lock, flags);
> > > > > > +}
> > > > > > +
> > > > > > +static void mvebu_pcie_intx_irq_unmask(struct irq_data *d)
> > > > > > +{
> > > > > > + struct mvebu_pcie_port *port = d->domain->host_data;
> > > > > > + irq_hw_number_t hwirq = irqd_to_hwirq(d);
> > > > > > + unsigned long flags;
> > > > > > + u32 unmask;
> > > > > > +
> > > > > > + raw_spin_lock_irqsave(&port->irq_lock, flags);
> > > > > > + unmask = mvebu_readl(port, PCIE_INT_UNMASK_OFF);
> > > > > > + unmask |= PCIE_INT_INTX(hwirq);
> > > > > > + mvebu_writel(port, unmask, PCIE_INT_UNMASK_OFF);
> > > > > > + raw_spin_unlock_irqrestore(&port->irq_lock, flags);
> > > > > > +}
> > > > > > +
> > > > > > +static int mvebu_pcie_intx_irq_map(struct irq_domain *h,
> > > > > > + unsigned int virq, irq_hw_number_t hwirq)
> > > > > > +{
> > > > > > + struct mvebu_pcie_port *port = h->host_data;
> > > > > > +
> > > > > > + irq_set_status_flags(virq, IRQ_LEVEL);
> > > > > > + irq_set_chip_and_handler(virq, &port->intx_irq_chip, handle_level_irq);
> > > > > > + irq_set_chip_data(virq, port);
> > > > > > +
> > > > > > + return 0;
> > > > > > +}
> > > > > > +
> > > > > > +static const struct irq_domain_ops mvebu_pcie_intx_irq_domain_ops = {
> > > > > > + .map = mvebu_pcie_intx_irq_map,
> > > > > > + .xlate = irq_domain_xlate_onecell,
> > > > > > +};
> > > > > > +
> > > > > > +static int mvebu_pcie_init_irq_domain(struct mvebu_pcie_port *port)
> > > > > > +{
> > > > > > + struct device *dev = &port->pcie->pdev->dev;
> > > > > > + struct device_node *pcie_intc_node;
> > > > > > +
> > > > > > + raw_spin_lock_init(&port->irq_lock);
> > > > > > +
> > > > > > + port->intx_irq_chip.name = devm_kasprintf(dev, GFP_KERNEL,
> > > > > > + "mvebu-%s-INTx",
> > > > > > + port->name);
> > > > >
> > > > > That's exactly what I really don't want to see. It prevents sharing of
> > > > > the irq_chip structure, and gets in the way of making it const in the
> > > > > future. Yes, I know that some drivers do that. I can't fix those,
> > > > > because /proc/interrupts is ABI. But I really don't want to see more
> > > > > of these.
> > > >
> > > > Well, I do not understand why it should be shared and with who. HW has N
> > > > independent IRQ chips for legacy interrupts. And each one will be
> > > > specified in DT per HW layout / design.
> > >
> > > If you have multiple ports, all the ports can share the irq_chip
> > > structure. Actually scratch that. They *MUST* share the structure. The
> > > only reason you're not sharing it is to be able to print this useless
> > > string in /proc/interrupts.
> >
> > What is the point of sharing one irq chip if HW has N independent irq
> > chips (for legacy interrupts)? I do not catch it yet. And I do not care
> > here for /proc/interrupts, so also I have not caught what do you mean be
> > last sentence with "the only reason".
> >
> > And I still do not see how it could even work to have just one irq chip
> > and one irq domain as each irq domain needs to know to which port it
> > belongs, so it can mask/unmask interrupts from correct port. Also
> > initialization of domain is taking DT node and for each port it is
> > different.
> >
> > So I'm somehow confused here...
> >
> > The improvement in this patch is to be able to mask INTA interrupts on
> > port 1 and let INTA interrupts unmasked on port 2 if there drivers are
> > interested only for interrupts from device connected to port 2.
> >
> > And if all interrupts are going to be shared (again) then it does not
> > solve any problem.
>
> You are completely missing my point. I'm talking about data
> structures, you're talking about interrupts. You have this:
>
> struct mvebu_pcie_port {
> // Tons of stuff
> struct irq_chip intx_chip;
> };
>
> What I want you to do is:
>
> struct mvebu_pcie_port {
> // Tons of stuff
> };
>
> static struct irq_chip intx_chip = {
> .name = "INTx",
> .irq_mask = mvebu_pcie_intx_irq_mask,
> .irq_unmask = mvebu_pcie_intx_irq_unmask;
> };
>
> That's it. No more, no less.
>
> M.
>

Hmm, but struct irq_chip contains a dynamic member,
struct device *parent_device;
Isn't that used? Or are you planning to kill it?

Marek

\
 
 \ /
  Last update: 2022-01-06 18:21    [W:0.208 / U:0.260 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site