lkml.org 
[lkml]   [2022]   [Jan]   [4]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [PATCH v3 1/2] usb: dwc3: Add a quirk to set GUCTL.SPRSCTRLTRANSEN bit.
Date
On Thu, 2022-01-03 13:35 UTC Greg Kroah-Hartman wrote:
>On Fri, Dec 31, 2021 at 07:59:31PM +0800, Yaqin Pan wrote:
>> On Thu, 30 Dec 2021 16:48:09 +0100 Greg Kroah-Hartman wrote:
>> >On Thu, Dec 30, 2021 at 11:36:12PM +0800, Yaqin Pan wrote:
>> >> On Thu, 30 Dec 2021 15:12:27 +0100 Greg Kroah-Hartman wrote:
>> >> >> This quirk is only for dwc3 host mode.
>> >> >> the dwc3 controller can't emurate some devices successfully.
>> >> >> For example, TF card reader (aaaa:8816):
>> >> >> failed log
>> >> >> usb 1-1: new high-speed USB device number 2 using xhci-hcd
>> >> >> usb 1-1: device descriptor read/all, error -110
>> >> >> >From the usb analyzer, always return NAK in the data phase.
>> >> >> if enable the GUCTL.SPRSCTRLTRANSEN bit. then the log is:
>> >> >> usb 2-1: new high-speed USB device number 3 using xhci-hcd
>> >> >> usb 2-1: New USB device found, idVendor=aaaa,
>> >> >> idProduct=8816, bcdDevice=13.08
>> >> >> usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
>> >> >> usb 2-1: Product: MXT USB Device
>> >> >> usb 2-1: Manufacturer: MXTronics
>> >> >> usb 2-1: SerialNumber: 150101v01
>> >> >> usb 2-1: New USB device found, VID=aaaa, PID=8816
>> >> >>
>> >> >> Some devices are slow in responding to Control transfers.
>> >> >> Scheduling mulitiple transactions in one microframe/frame
>> >> >> can cause the devices to misbehave. if this qurik is enabled,
>> >> >> the host controller schedules transations for a Control transfer
>> >> >> in defferent microframes/frame.
>> >> >
>> >> >If this is needed for all devices (i.e. you do not know what device is
>> >> >going to be plugged in), why not just enable it for all controllers?
>> >> >Why whould you NOT want this enabled?
>> >> >
>> >> >Or is this a broken hardware device and only specific host controllers
>> >> >need this? If so, how do we know which ones need this set and which do
>> >> >not?
>> >>
>> >> I think not all dwc3 controllers need this. For cell phone,customers may
>> >> use various usb devices, we can enable this quirk to fix some compatibility
>> >> issues. For some chip platform of qcom, i encounter this issue, not every
>> >> platform i encounter this problem.
>> >>
>> >> If enabled for all controllers, it will reduce the speed of Control transfers.
>> >> So i think it would be better for user to enable it by their own purposes.
>> >
>> >But how do hardware vendors know to enable this? Can we trigger off of
>> >PCI ids? Do we need a list of quirks to show which host controllers are
>> >broken this way?
>> >
>> >Burying something as basic as "reliable device connection" in a DT quirk
>> >seems very sloppy to me. We want reliable systems, right?
>>
>> Yes, we want reliable systems. But i don't have a good ideal about this issue.
>> when we meet this problem, and from the dwc-usb3 controller datasheet,we know
>> enable one bit in dwc-usb3 controller's register can fixed this issue.
>>
>> Of course, i can list the host controllers that i used broken this way if needed.
>
>Please have a list of controller that this is needed for, and add the
>quirk for them only. Don't require this to be in a DT file as that will
>never be noticed.

The dwc3-core i list below:
qcom,sm8350-dwc3;
qcom,sm7325-dwc3;
qcom,sm6225-dwc3;
....
And i will try to contact with qcom for further help.

thanks,

Yaqin pan

\
 
 \ /
  Last update: 2022-01-04 15:58    [W:0.071 / U:0.920 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site