lkml.org 
[lkml]   [2022]   [Jan]   [4]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[RFC PATCH 2/2] can: flexcan: add ethtool support
Date
For now, the driver information is added but the target is to change the
type of reception at runtime (RxFIFO enabled / disabled).

Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>

---

drivers/net/can/Makefile | 3 +
drivers/net/can/flexcan.h | 107 ++++++++++++++++++
drivers/net/can/flexcan_ethtool.c | 29 +++++
drivers/net/can/{flexcan.c => flexcan_main.c} | 96 +---------------
4 files changed, 142 insertions(+), 93 deletions(-)
create mode 100644 drivers/net/can/flexcan.h
create mode 100644 drivers/net/can/flexcan_ethtool.c
rename drivers/net/can/{flexcan.c => flexcan_main.c} (94%)

diff --git a/drivers/net/can/Makefile b/drivers/net/can/Makefile
index a2b4463d8480..34728cfa6430 100644
--- a/drivers/net/can/Makefile
+++ b/drivers/net/can/Makefile
@@ -16,7 +16,10 @@ obj-y += softing/
obj-$(CONFIG_CAN_AT91) += at91_can.o
obj-$(CONFIG_CAN_CC770) += cc770/
obj-$(CONFIG_CAN_C_CAN) += c_can/
+
obj-$(CONFIG_CAN_FLEXCAN) += flexcan.o
+flexcan-objs += flexcan_main.o flexcan_ethtool.o
+
obj-$(CONFIG_CAN_GRCAN) += grcan.o
obj-$(CONFIG_CAN_IFI_CANFD) += ifi_canfd/
obj-$(CONFIG_CAN_JANZ_ICAN3) += janz-ican3.o
diff --git a/drivers/net/can/flexcan.h b/drivers/net/can/flexcan.h
new file mode 100644
index 000000000000..722b8edc3ff8
--- /dev/null
+++ b/drivers/net/can/flexcan.h
@@ -0,0 +1,107 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (C) 2022 Amarula Solutions
+ *
+ * Author: Dario Binacchi <dario.binacchi@amarulasolutions.com>
+ */
+
+#ifndef FLEXCAN_H
+#define FLEXCAN_H
+
+#include <linux/can/rx-offload.h>
+
+/* FLEXCAN hardware feature flags
+ *
+ * Below is some version info we got:
+ * SOC Version IP-Version Glitch- [TR]WRN_INT IRQ Err Memory err RTR rece- FD Mode MB
+ * Filter? connected? Passive detection ption in MB Supported?
+ * MCF5441X FlexCAN2 ? no yes no no yes no 16
+ * MX25 FlexCAN2 03.00.00.00 no no no no no no 64
+ * MX28 FlexCAN2 03.00.04.00 yes yes no no no no 64
+ * MX35 FlexCAN2 03.00.00.00 no no no no no no 64
+ * MX53 FlexCAN2 03.00.00.00 yes no no no no no 64
+ * MX6s FlexCAN3 10.00.12.00 yes yes no no yes no 64
+ * MX8QM FlexCAN3 03.00.23.00 yes yes no no yes yes 64
+ * MX8MP FlexCAN3 03.00.17.01 yes yes no yes yes yes 64
+ * VF610 FlexCAN3 ? no yes no yes yes? no 64
+ * LS1021A FlexCAN2 03.00.04.00 no yes no no yes no 64
+ * LX2160A FlexCAN3 03.00.23.00 no yes no yes yes yes 64
+ *
+ * Some SOCs do not have the RX_WARN & TX_WARN interrupt line connected.
+ */
+
+/* [TR]WRN_INT not connected */
+#define FLEXCAN_QUIRK_BROKEN_WERR_STATE BIT(1)
+ /* Disable RX FIFO Global mask */
+#define FLEXCAN_QUIRK_DISABLE_RXFG BIT(2)
+/* Enable EACEN and RRS bit in ctrl2 */
+#define FLEXCAN_QUIRK_ENABLE_EACEN_RRS BIT(3)
+/* Disable non-correctable errors interrupt and freeze mode */
+#define FLEXCAN_QUIRK_DISABLE_MECR BIT(4)
+/* Use timestamp based offloading */
+#define FLEXCAN_QUIRK_USE_OFF_TIMESTAMP BIT(5)
+/* No interrupt for error passive */
+#define FLEXCAN_QUIRK_BROKEN_PERR_STATE BIT(6)
+/* default to BE register access */
+#define FLEXCAN_QUIRK_DEFAULT_BIG_ENDIAN BIT(7)
+/* Setup stop mode with GPR to support wakeup */
+#define FLEXCAN_QUIRK_SETUP_STOP_MODE_GPR BIT(8)
+/* Support CAN-FD mode */
+#define FLEXCAN_QUIRK_SUPPORT_FD BIT(9)
+/* support memory detection and correction */
+#define FLEXCAN_QUIRK_SUPPORT_ECC BIT(10)
+/* Setup stop mode with SCU firmware to support wakeup */
+#define FLEXCAN_QUIRK_SETUP_STOP_MODE_SCFW BIT(11)
+/* Setup 3 separate interrupts, main, boff and err */
+#define FLEXCAN_QUIRK_NR_IRQ_3 BIT(12)
+/* Setup 16 mailboxes */
+#define FLEXCAN_QUIRK_NR_MB_16 BIT(13)
+
+struct flexcan_devtype_data {
+ u32 quirks; /* quirks needed for different IP cores */
+};
+
+struct flexcan_stop_mode {
+ struct regmap *gpr;
+ u8 req_gpr;
+ u8 req_bit;
+};
+
+struct flexcan_priv {
+ struct can_priv can;
+ struct can_rx_offload offload;
+ struct device *dev;
+
+ struct flexcan_regs __iomem *regs;
+ struct flexcan_mb __iomem *tx_mb;
+ struct flexcan_mb __iomem *tx_mb_reserved;
+ u8 tx_mb_idx;
+ u8 mb_count;
+ u8 mb_size;
+ u8 clk_src; /* clock source of CAN Protocol Engine */
+ u8 scu_idx;
+
+ u64 rx_mask;
+ u64 tx_mask;
+ u32 reg_ctrl_default;
+
+ struct clk *clk_ipg;
+ struct clk *clk_per;
+ struct flexcan_devtype_data devtype_data;
+ struct regulator *reg_xceiver;
+ struct flexcan_stop_mode stm;
+
+ int irq_boff;
+ int irq_err;
+
+ /* IPC handle when setup stop mode by System Controller firmware(scfw) */
+ struct imx_sc_ipc *sc_ipc_handle;
+
+ /* Read and Write APIs */
+ u32 (*read)(void __iomem *addr);
+ void (*write)(u32 val, void __iomem *addr);
+};
+
+void flexcan_set_ethtool_ops(struct net_device *dev);
+
+#endif /* FLEXCAN_H */
diff --git a/drivers/net/can/flexcan_ethtool.c b/drivers/net/can/flexcan_ethtool.c
new file mode 100644
index 000000000000..55c6b59bb6bf
--- /dev/null
+++ b/drivers/net/can/flexcan_ethtool.c
@@ -0,0 +1,29 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2022 Amarula Solutions
+ *
+ * Author: Dario Binacchi <dario.binacchi@amarulasolutions.com>
+ */
+
+#include <linux/ethtool.h>
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/netdevice.h>
+#include <linux/can/dev.h>
+
+#include "flexcan.h"
+
+static void flexcan_get_drvinfo(struct net_device *netdev,
+ struct ethtool_drvinfo *info)
+{
+ strscpy(info->driver, "flexcan", sizeof(info->driver));
+}
+
+static const struct ethtool_ops flexcan_ethtool_ops = {
+ .get_drvinfo = flexcan_get_drvinfo,
+};
+
+void flexcan_set_ethtool_ops(struct net_device *netdev)
+{
+ netdev->ethtool_ops = &flexcan_ethtool_ops;
+}
diff --git a/drivers/net/can/flexcan.c b/drivers/net/can/flexcan_main.c
similarity index 94%
rename from drivers/net/can/flexcan.c
rename to drivers/net/can/flexcan_main.c
index 223c32bf1f6c..e3e43e9cfbd6 100644
--- a/drivers/net/can/flexcan.c
+++ b/drivers/net/can/flexcan_main.c
@@ -15,7 +15,6 @@
#include <linux/can/dev.h>
#include <linux/can/error.h>
#include <linux/can/led.h>
-#include <linux/can/rx-offload.h>
#include <linux/clk.h>
#include <linux/delay.h>
#include <linux/firmware/imx/sci.h>
@@ -33,6 +32,8 @@
#include <linux/regmap.h>
#include <linux/regulator/consumer.h>

+#include "flexcan.h"
+
#define DRV_NAME "flexcan"

/* 8 for RX fifo and 2 error handling */
@@ -206,53 +207,6 @@

#define FLEXCAN_TIMEOUT_US (250)

-/* FLEXCAN hardware feature flags
- *
- * Below is some version info we got:
- * SOC Version IP-Version Glitch- [TR]WRN_INT IRQ Err Memory err RTR rece- FD Mode MB
- * Filter? connected? Passive detection ption in MB Supported?
- * MCF5441X FlexCAN2 ? no yes no no yes no 16
- * MX25 FlexCAN2 03.00.00.00 no no no no no no 64
- * MX28 FlexCAN2 03.00.04.00 yes yes no no no no 64
- * MX35 FlexCAN2 03.00.00.00 no no no no no no 64
- * MX53 FlexCAN2 03.00.00.00 yes no no no no no 64
- * MX6s FlexCAN3 10.00.12.00 yes yes no no yes no 64
- * MX8QM FlexCAN3 03.00.23.00 yes yes no no yes yes 64
- * MX8MP FlexCAN3 03.00.17.01 yes yes no yes yes yes 64
- * VF610 FlexCAN3 ? no yes no yes yes? no 64
- * LS1021A FlexCAN2 03.00.04.00 no yes no no yes no 64
- * LX2160A FlexCAN3 03.00.23.00 no yes no yes yes yes 64
- *
- * Some SOCs do not have the RX_WARN & TX_WARN interrupt line connected.
- */
-
-/* [TR]WRN_INT not connected */
-#define FLEXCAN_QUIRK_BROKEN_WERR_STATE BIT(1)
- /* Disable RX FIFO Global mask */
-#define FLEXCAN_QUIRK_DISABLE_RXFG BIT(2)
-/* Enable EACEN and RRS bit in ctrl2 */
-#define FLEXCAN_QUIRK_ENABLE_EACEN_RRS BIT(3)
-/* Disable non-correctable errors interrupt and freeze mode */
-#define FLEXCAN_QUIRK_DISABLE_MECR BIT(4)
-/* Use timestamp based offloading */
-#define FLEXCAN_QUIRK_USE_OFF_TIMESTAMP BIT(5)
-/* No interrupt for error passive */
-#define FLEXCAN_QUIRK_BROKEN_PERR_STATE BIT(6)
-/* default to BE register access */
-#define FLEXCAN_QUIRK_DEFAULT_BIG_ENDIAN BIT(7)
-/* Setup stop mode with GPR to support wakeup */
-#define FLEXCAN_QUIRK_SETUP_STOP_MODE_GPR BIT(8)
-/* Support CAN-FD mode */
-#define FLEXCAN_QUIRK_SUPPORT_FD BIT(9)
-/* support memory detection and correction */
-#define FLEXCAN_QUIRK_SUPPORT_ECC BIT(10)
-/* Setup stop mode with SCU firmware to support wakeup */
-#define FLEXCAN_QUIRK_SETUP_STOP_MODE_SCFW BIT(11)
-/* Setup 3 separate interrupts, main, boff and err */
-#define FLEXCAN_QUIRK_NR_IRQ_3 BIT(12)
-/* Setup 16 mailboxes */
-#define FLEXCAN_QUIRK_NR_MB_16 BIT(13)
-
/* Structure of the message buffer */
struct flexcan_mb {
u32 can_ctrl;
@@ -339,51 +293,6 @@ struct flexcan_regs {

static_assert(sizeof(struct flexcan_regs) == 0x4 * 18 + 0xfb8);

-struct flexcan_devtype_data {
- u32 quirks; /* quirks needed for different IP cores */
-};
-
-struct flexcan_stop_mode {
- struct regmap *gpr;
- u8 req_gpr;
- u8 req_bit;
-};
-
-struct flexcan_priv {
- struct can_priv can;
- struct can_rx_offload offload;
- struct device *dev;
-
- struct flexcan_regs __iomem *regs;
- struct flexcan_mb __iomem *tx_mb;
- struct flexcan_mb __iomem *tx_mb_reserved;
- u8 tx_mb_idx;
- u8 mb_count;
- u8 mb_size;
- u8 clk_src; /* clock source of CAN Protocol Engine */
- u8 scu_idx;
-
- u64 rx_mask;
- u64 tx_mask;
- u32 reg_ctrl_default;
-
- struct clk *clk_ipg;
- struct clk *clk_per;
- struct flexcan_devtype_data devtype_data;
- struct regulator *reg_xceiver;
- struct flexcan_stop_mode stm;
-
- int irq_boff;
- int irq_err;
-
- /* IPC handle when setup stop mode by System Controller firmware(scfw) */
- struct imx_sc_ipc *sc_ipc_handle;
-
- /* Read and Write APIs */
- u32 (*read)(void __iomem *addr);
- void (*write)(u32 val, void __iomem *addr);
-};
-
static const struct flexcan_devtype_data fsl_mcf5441x_devtype_data = {
.quirks = FLEXCAN_QUIRK_BROKEN_PERR_STATE |
FLEXCAN_QUIRK_NR_IRQ_3 | FLEXCAN_QUIRK_NR_MB_16,
@@ -2177,6 +2086,7 @@ static int flexcan_probe(struct platform_device *pdev)
SET_NETDEV_DEV(dev, &pdev->dev);

dev->netdev_ops = &flexcan_netdev_ops;
+ flexcan_set_ethtool_ops(dev);
dev->irq = irq;
dev->flags |= IFF_ECHO;

--
2.32.0
\
 
 \ /
  Last update: 2022-01-04 14:21    [W:0.035 / U:0.964 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site