lkml.org 
[lkml]   [2022]   [Jan]   [4]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH v3 3/3] ahci: AMD A85 FCH (Hudson D4): Skip 200 ms debounce delay in `sata_link_resume()`
From
On 12/31/21 16:08, Paul Menzel wrote:
> Dear Damien,
>
>
> Am 31.12.21 um 01:52 schrieb Damien Le Moal:
>> On 12/30/21 20:08, Paul Menzel wrote:
>>>>> board_ahci_nomsi,
>>>>> board_ahci_noncq,
>>>>> board_ahci_nosntf,
>>>>> @@ -141,6 +142,13 @@ static const struct ata_port_info ahci_port_info[] = {
>>>>> .udma_mask = ATA_UDMA6,
>>>>> .port_ops = &ahci_ops,
>>>>> },
>>>>> + [board_ahci_nodbdelay] = {
>>>>> + .flags = AHCI_FLAG_COMMON,
>>>>> + .link_flags = ATA_LFLAG_NO_DB_DELAY,
>>>>> + .pio_mask = ATA_PIO4,
>>>>> + .udma_mask = ATA_UDMA6,
>>>>> + .port_ops = &ahci_ops,
>>>>> + },
>>>>> [board_ahci_nomsi] = {
>>>>> AHCI_HFLAGS (AHCI_HFLAG_NO_MSI),
>>>>> .flags = AHCI_FLAG_COMMON,
>>>>> @@ -437,6 +445,7 @@ static const struct pci_device_id ahci_pci_tbl[] = {
>>>>> board_ahci_al },
>>>>> /* AMD */
>>>>> { PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_HUDSON2_SATA_IDE), board_ahci },
>>>>> + { PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_HUDSON2_SATA_AHCI), board_ahci_nodbdelay },
>>>>
>>>> Patch 1 introduces this macro in pci_ids.h, but it is used only here. So
>>>> to keep with the current style in this structure, drop the macro (so
>>>> drop patch 1).
>>>
>>> I wait for your answer of the second patch, and then I am going to sent v4.
>>
>> Let's use the numeric value. No macro definition needed.
>
> Alright. I am going to follow the maintainers wishes.
>
>>>>> { PCI_VDEVICE(AMD, 0x7900), board_ahci }, /* AMD CZ */
>>>>> { PCI_VDEVICE(AMD, 0x7901), board_ahci_mobile }, /* AMD Green Sardine */
>>>>> /* AMD is using RAID class only for ahci controllers */
>>>
>>> Do you have a AHCI device at hand, where you could also test if
>>> everything works fine without the delay?
>>
>> Unfortunately, I do not have any board with this adapter.
>
> Sorry, we misunderstand each other. (I wrote a reply to my own patch [1].)
>
> I think the delay is not necessary for any modern AHCI controller. It’d
> be great, if you could test, if it’s also true on the systems you have
> by just skipping the delay.

I need to figure out how to safely test suspend/resume remotely (working
from home) :)

It would indeed be great to have the default as "no delay on resume" and
add the delay only for chipsets that need it. However, it is unclear
which chipset need the delay, right ? So I think we are stuck with
switching chipsets to "no delay" one by one by testing. Once the
majority of drivers are converted, we can reverse the default to be "no
delay" and mark untested drivers as needing the delay.

>
>
> Kind regards,
>
> Paul
>
>
> [1]:
> https://lore.kernel.org/linux-ide/20211227162658.11314-2-pmenzel@molgen.mpg.de/T/#m697d2121463a4c946730e6b83940e12d6d7e6700


--
Damien Le Moal
Western Digital Research

\
 
 \ /
  Last update: 2022-01-04 09:37    [W:0.505 / U:0.236 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site