lkml.org 
[lkml]   [2022]   [Jan]   [20]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v2 08/11] PCI: mvebu: Use child_ops API
On Wed, Jan 12, 2022 at 04:18:11PM +0100, Pali Rohár wrote:
> Split struct pci_ops between ops and child_ops. Member ops is used for
> accessing PCIe Root Ports via pci-bridge-emul.c driver and child_ops for
> accessing real PCIe cards.
>
> There is no need to mix these two struct pci_ops into one as PCI core code
> already provides separate callbacks via bridge->ops and bridge->child_ops.
>
> Signed-off-by: Pali Rohár <pali@kernel.org>
> ---
> drivers/pci/controller/pci-mvebu.c | 82 ++++++++++++++++--------------
> 1 file changed, 44 insertions(+), 38 deletions(-)
>
> diff --git a/drivers/pci/controller/pci-mvebu.c b/drivers/pci/controller/pci-mvebu.c
> index 9ea2f6a7c2b0..1e90ab888075 100644
> --- a/drivers/pci/controller/pci-mvebu.c
> +++ b/drivers/pci/controller/pci-mvebu.c
> @@ -294,11 +294,29 @@ static void mvebu_pcie_setup_hw(struct mvebu_pcie_port *port)
> mvebu_writel(port, mask, PCIE_MASK_OFF);
> }
>
> -static int mvebu_pcie_hw_rd_conf(struct mvebu_pcie_port *port,
> - struct pci_bus *bus,
> - u32 devfn, int where, int size, u32 *val)
> +static struct mvebu_pcie_port *mvebu_pcie_find_port(struct mvebu_pcie *pcie,
> + struct pci_bus *bus,
> + int devfn);
> +
> +static int mvebu_pcie_child_rd_conf(struct pci_bus *bus, u32 devfn, int where,
> + int size, u32 *val)
> {
> - void __iomem *conf_data = port->base + PCIE_CONF_DATA_OFF;
> + struct mvebu_pcie *pcie = bus->sysdata;
> + struct mvebu_pcie_port *port;
> + void __iomem *conf_data;
> +
> + port = mvebu_pcie_find_port(pcie, bus, devfn);
> + if (!port) {
> + *val = 0xffffffff;
> + return PCIBIOS_DEVICE_NOT_FOUND;
> + }
> +
> + if (!mvebu_pcie_link_up(port)) {
> + *val = 0xffffffff;
> + return PCIBIOS_DEVICE_NOT_FOUND;
> + }
> +
> + conf_data = port->base + PCIE_CONF_DATA_OFF;
>
> mvebu_writel(port, PCIE_CONF_ADDR(bus->number, devfn, where),
> PCIE_CONF_ADDR_OFF);
> @@ -321,11 +339,21 @@ static int mvebu_pcie_hw_rd_conf(struct mvebu_pcie_port *port,
> return PCIBIOS_SUCCESSFUL;
> }
>
> -static int mvebu_pcie_hw_wr_conf(struct mvebu_pcie_port *port,
> - struct pci_bus *bus,
> - u32 devfn, int where, int size, u32 val)
> +static int mvebu_pcie_child_wr_conf(struct pci_bus *bus, u32 devfn,
> + int where, int size, u32 val)
> {
> - void __iomem *conf_data = port->base + PCIE_CONF_DATA_OFF;
> + struct mvebu_pcie *pcie = bus->sysdata;
> + struct mvebu_pcie_port *port;
> + void __iomem *conf_data;
> +

> + port = mvebu_pcie_find_port(pcie, bus, devfn);
> + if (!port)
> + return PCIBIOS_DEVICE_NOT_FOUND;
> +
> + if (!mvebu_pcie_link_up(port))
> + return PCIBIOS_DEVICE_NOT_FOUND;
> +
> + conf_data = port->base + PCIE_CONF_DATA_OFF;

Again, the same setup code in read and write is a sign to use
.map_bus(). You can copy it from my version I pointed you to.

Rob

\
 
 \ /
  Last update: 2022-01-20 17:49    [W:0.423 / U:0.600 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site