lkml.org 
[lkml]   [2022]   [Jan]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
Subject[PATCH 2/6] dt-bindings: mux: Document mux-states property
From: Aswath Govindraju <a-govindraju@ti.com>

In some cases, it is required to provide the state to which the mux
controller has to be set to, from the consumer device tree node. Document
the property mux-states that can be used for adding this support.

Signed-off-by: Aswath Govindraju <a-govindraju@ti.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Peter Rosin <peda@axentia.se>
---
.../devicetree/bindings/mux/gpio-mux.yaml | 11 ++++++--
.../devicetree/bindings/mux/mux-consumer.yaml | 21 +++++++++++++++
.../bindings/mux/mux-controller.yaml | 26 ++++++++++++++++++-
3 files changed, 55 insertions(+), 3 deletions(-)

diff --git a/Documentation/devicetree/bindings/mux/gpio-mux.yaml b/Documentation/devicetree/bindings/mux/gpio-mux.yaml
index 0a7c8d64981a..ee4de9fbaf4d 100644
--- a/Documentation/devicetree/bindings/mux/gpio-mux.yaml
+++ b/Documentation/devicetree/bindings/mux/gpio-mux.yaml
@@ -26,7 +26,10 @@ properties:
List of gpios used to control the multiplexer, least significant bit first.

'#mux-control-cells':
- const: 0
+ enum: [ 0, 1 ]
+
+ '#mux-state-cells':
+ enum: [ 1, 2 ]

idle-state:
default: -1
@@ -34,7 +37,11 @@ properties:
required:
- compatible
- mux-gpios
- - "#mux-control-cells"
+anyOf:
+ - required:
+ - "#mux-control-cells"
+ - required:
+ - "#mux-state-cells"

additionalProperties: false

diff --git a/Documentation/devicetree/bindings/mux/mux-consumer.yaml b/Documentation/devicetree/bindings/mux/mux-consumer.yaml
index 7af93298ab5c..d3d854967359 100644
--- a/Documentation/devicetree/bindings/mux/mux-consumer.yaml
+++ b/Documentation/devicetree/bindings/mux/mux-consumer.yaml
@@ -25,6 +25,17 @@ description: |
strings to label each of the mux controllers listed in the "mux-controls"
property.

+ If it is required to provide the state that the mux controller needs to
+ be set to, the property "mux-states" must be used. An optional property
+ "mux-state-names" can be used to provide a list of strings, to label
+ each of the multiplixer states listed in the "mux-states" property.
+
+ Properties "mux-controls" and "mux-states" can be used depending on how
+ the consumers want to control the mux controller. If the consumer needs
+ needs to set multiple states in a mux controller, then property
+ "mux-controls" can be used. If the consumer needs to set the mux
+ controller to a given state then property "mux-states" can be used.
+
mux-ctrl-specifier typically encodes the chip-relative mux controller number.
If the mux controller chip only provides a single mux controller, the
mux-ctrl-specifier can typically be left out.
@@ -35,12 +46,22 @@ properties:
mux-controls:
$ref: /schemas/types.yaml#/definitions/phandle-array

+ mux-states:
+ $ref: /schemas/types.yaml#/definitions/phandle-array
+
mux-control-names:
description:
Devices that use more than a single mux controller can use the
"mux-control-names" property to map the name of the requested mux
controller to an index into the list given by the "mux-controls" property.

+ mux-state-names:
+ description:
+ Devices that use more than a single multiplexer state can use the
+ "mux-state-names" property to map the name of the requested mux
+ controller to an index into the list given by the "mux-states"
+ property.
+
additionalProperties: true

...
diff --git a/Documentation/devicetree/bindings/mux/mux-controller.yaml b/Documentation/devicetree/bindings/mux/mux-controller.yaml
index 736a84c3b6a5..c855fbad3884 100644
--- a/Documentation/devicetree/bindings/mux/mux-controller.yaml
+++ b/Documentation/devicetree/bindings/mux/mux-controller.yaml
@@ -25,7 +25,9 @@ description: |
--------------------

Mux controller nodes must specify the number of cells used for the
- specifier using the '#mux-control-cells' property.
+ specifier using the '#mux-control-cells' or '#mux-state-cells' property.
+ The value of '#mux-state-cells' will always be one greater than the value
+ of '#mux-control-cells'.

Optionally, mux controller nodes can also specify the state the mux should
have when it is idle. The idle-state property is used for this. If the
@@ -67,6 +69,8 @@ select:
pattern: '^mux-controller'
- required:
- '#mux-control-cells'
+ - required:
+ - '#mux-state-cells'

properties:
$nodename:
@@ -75,6 +79,9 @@ properties:
'#mux-control-cells':
enum: [ 0, 1 ]

+ '#mux-state-cells':
+ enum: [ 1, 2 ]
+
idle-state:
$ref: /schemas/types.yaml#/definitions/int32
minimum: -2
@@ -179,4 +186,21 @@ examples:
};
};
};
+
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+
+ mux1: mux-controller {
+ compatible = "gpio-mux";
+ #mux-state-cells = <1>;
+ mux-gpios = <&exp_som 2 GPIO_ACTIVE_HIGH>;
+ };
+
+ transceiver4: can-phy4 {
+ compatible = "ti,tcan1042";
+ #phy-cells = <0>;
+ max-bitrate = <5000000>;
+ standby-gpios = <&exp_som 7 GPIO_ACTIVE_HIGH>;
+ mux-states = <&mux1 1>;
+ };
...
--
2.20.1

\
 
 \ /
  Last update: 2022-01-02 23:38    [W:0.109 / U:0.016 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site