lkml.org 
[lkml]   [2022]   [Jan]   [18]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH 0/4] Fix and improve gpmi nand on mx28
Date
Starting from [1], the series fixes the timings setting of the gpmi
controller for the mx28 architecture, also adding support for fast
edo mode timings. The whole series has been heavily tested with the
mtd kernel test modules, and with repeated write cycles on nand.

The whole series has been tested and reviewed by Sascha Hauer <s.hauer@pengutronix.de>,
so I removed the RFC prefix and re-submitted it as a regular patch
set by adding the 'Tested-by' and 'Review-by' tags to every single patch.

[1] https://lore.kernel.org/r/20210702065350.209646-5-ebiggers@kernel.org


Dario Binacchi (4):
ARM: dts: imx28: reparent gpmi clock to ref_gpmi
mtd: rawnand: gpmi: fix controller timings setting
mtd: rawnand: gpmi: validate controller clock rate
mtd: rawnand: gpmi: support fast edo timings for mx28

arch/arm/boot/dts/imx28.dtsi | 2 ++
drivers/mtd/nand/raw/gpmi-nand/gpmi-nand.c | 27 ++++++++++++++++++----
2 files changed, 24 insertions(+), 5 deletions(-)

--
2.32.0

\
 
 \ /
  Last update: 2022-01-18 10:55    [W:0.083 / U:0.108 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site