lkml.org 
[lkml]   [2022]   [Jan]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH 4/4] arm64: dts: qcom: sc7280: Add herobrine-r1
Quoting Douglas Anderson (2022-01-13 16:43:03)
> Add the new herobrine-r1. Note that this is pretty much a re-design
> compared to herobrine-r0 so we don't attempt any dtsi to share stuff
> between them.
>
> This patch attempts to define things at 3 levels:
>
> 1. The Qcard level. Herobrine includes a Qcard PCB and the Qcard PCB
> is supposed to be the same (modulo stuffing options) across
> multiple boards, so trying to define what's there hopefully makes
> sense. NOTE that newer "CRD" boards from Qualcomm also use
> Qcard. When support for CRD3 is added hopefully it can use the
> Qcard include (and perhaps we should even evaluate it using
> herobrine.dtsi?)
> 2. The herobrine "baseboard" level. Right now most stuff is here with
> the exception of things that we _know_ will be different per
> board. We know that not all boards will have the same set of eMMC,
> nvme, and SD. We also know that the exact pin names are likely to
> be different.
> 3. The actual "board" level, AKA herobrine-rev1.
>
> NOTES:
> - This boots to command prompt, but no eDP yet since eDP hasn't
> been added to sc7280.dtsi yet.
> - This assumes LTE for now. Once it's clear how WiFi-only SKUs will
> work we expect some small changes.
>
> Signed-off-by: Douglas Anderson <dianders@chromium.org>
> ---

Reviewed-by: Stephen Boyd <swboyd@chromium.org>

\
 
 \ /
  Last update: 2022-01-14 07:25    [W:0.098 / U:0.356 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site