lkml.org 
[lkml]   [2022]   [Jan]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH 2/5] drm/exynos: mixer: Use platform_get_irq() to get the interrupt
Hi Inki,

On Fri, Jan 14, 2022 at 11:08 AM Inki Dae <inki.dae@samsung.com> wrote:
>
> Hi Lad Prabhakar,
>
> 21. 12. 23. 오전 4:01에 Lad Prabhakar 이(가) 쓴 글:
> > platform_get_resource(pdev, IORESOURCE_IRQ, ..) relies on static
> > allocation of IRQ resources in DT core code, this causes an issue
> > when using hierarchical interrupt domains using "interrupts" property
> > in the node as this bypassed the hierarchical setup and messed up the
> > irq chaining.
> >
> > In preparation for removal of static setup of IRQ resource from DT core
> > code use platform_get_irq().
> >
> > Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
> > ---
> > Hi,
> >
> > Ideally I would expect the mixer_resources_init() to be called from probe
> > instead from the bind callback. If platform_get_irq() returns -EPROBE_DEFER
> > the bind callback will fail :(
>
> If the bind callback failed then probe function of exynos drm driver will call -EPROBE_DEFER like below so it must be no problem :),
> --------------------------------------------
> in exynos_drm_platform_probe function
> component_master_add_with_match()
>
> in component_master_add_with_match function
> try_to_bring_up_master()
>
Thank you for the clarification.

Cheers,
Prabhakar

\
 
 \ /
  Last update: 2022-01-15 02:41    [W:0.042 / U:0.068 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site