lkml.org 
[lkml]   [2022]   [Jan]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v19 3/5] usb: misc: Add onboard_usb_hub driver
Hi Stephen,

thanks for the review!

On Wed, Jan 12, 2022 at 07:49:40PM -0800, Stephen Boyd wrote:
> Quoting Matthias Kaehlcke (2022-01-12 11:10:46)
> > diff --git a/drivers/usb/misc/Kconfig b/drivers/usb/misc/Kconfig
> > index 8f1144359012..bbced519499a 100644
> > --- a/drivers/usb/misc/Kconfig
> > +++ b/drivers/usb/misc/Kconfig
> > @@ -284,3 +284,26 @@ config BRCM_USB_PINMAP
> > This option enables support for remapping some USB external
> > signals, which are typically on dedicated pins on the chip,
> > to any gpio.
> > +
> > +config USB_ONBOARD_HUB
> > + bool "Onboard USB hub support"
> > + depends on OF || COMPILE_TEST
> > + help
> > + Say Y here if you want to support discrete onboard USB hubs that
> > + don't require an additional control bus for initialization, but
> > + need some nontrivial form of initialization, such as enabling a
>
> s/nontrivial/non-trivial/

ack

> > + power regulator. An example for such a hub is the Realtek
> > + RTS5411.
> > +
> > + This driver can be used as a module but its state (module vs
> > + builtin) must match the state of the USB subsystem. Enabling
> > + this config will enable the driver and it will automatically
> > + match the state of the USB subsystem. If this driver is a
> > + module it will be called onboard_usb_hub.
> > +
> > +if USB_ONBOARD_HUB
> > +config USB_ONBOARD_HUB_ACTUAL
> > + tristate
> > + default m if USB=m
> > + default y if USB=y
> > +endif
> > diff --git a/drivers/usb/misc/onboard_usb_hub.c b/drivers/usb/misc/onboard_usb_hub.c
> > new file mode 100644
> > index 000000000000..4e88e3089def
> > --- /dev/null
> > +++ b/drivers/usb/misc/onboard_usb_hub.c
> > @@ -0,0 +1,494 @@
> > +// SPDX-License-Identifier: GPL-2.0-only
> > +/*
> > + * Driver for onboard USB hubs
> > + *
> > + * Copyright (c) 2020, Google LLC
> > + */
> > +
> > +#include <linux/device.h>
>
> Add export.h for EXPORT_SYMBOL_GPL usage

will do

> > +#include <linux/init.h>
> > +#include <linux/kernel.h>
> > +#include <linux/list.h>
> > +#include <linux/module.h>
> > +#include <linux/mutex.h>
> > +#include <linux/of.h>
> > +#include <linux/of_platform.h>
> > +#include <linux/platform_device.h>
> > +#include <linux/regulator/consumer.h>
> > +#include <linux/suspend.h>
> > +#include <linux/sysfs.h>
> > +#include <linux/usb.h>
> > +#include <linux/usb/hcd.h>
>
> Is this include used?

Yes, it is needed for calling usb_wakeup_enabled_descendants()

> > ...
> >
> > +static int __maybe_unused onboard_hub_suspend(struct device *dev)
> > +{
> > + struct onboard_hub *hub = dev_get_drvdata(dev);
> > + struct usbdev_node *node;
> > + bool power_off;
> > +
> > + if (hub->always_powered_in_suspend)
> > + return 0;
> > +
> > + power_off = true;
>
> Nitpick: Move this up to the declaration.

ok

> > ...
> >
> > +static int __maybe_unused onboard_hub_resume(struct device *dev)
> > +{
> > + struct onboard_hub *hub = dev_get_drvdata(dev);
> > +
> > + if (hub->is_powered_on)
> > + return 0;
> > +
> > + return onboard_hub_power_on(hub);
> > +}
> > +
> > +static inline void set_udev_link_name(struct usb_device *udev, char *buf, size_t size)
>
> const udev?

ack

> > +{
> > + snprintf(buf, size, "usb_dev.%s", dev_name(&udev->dev));
> > +}
> > +
> > +static int onboard_hub_add_usbdev(struct onboard_hub *hub, struct usb_device *udev)
> > +{
> > + struct usbdev_node *node;
> > + char link_name[64];
> > + int ret = 0;
> > +
> > + mutex_lock(&hub->lock);
> > +
> > + if (hub->going_away) {
> > + ret = -EINVAL;
> > + goto unlock;
> > + }
> > +
> > + node = devm_kzalloc(hub->dev, sizeof(*node), GFP_KERNEL);
> > + if (!node) {
> > + ret = -ENOMEM;
> > + goto unlock;
> > + }
> > +
> > + node->udev = udev;
> > +
> > + list_add(&node->list, &hub->udev_list);
> > +
> > + set_udev_link_name(udev, link_name, sizeof(link_name));
>
> It feels like udev is being modified by the name of the function. Maybe
> get_udev_link_name() is better or set_link_name_from_udev() or pass
> link_name first instead of udev?

Agreed, the name be confusing, I'll change it to get_udev_link_name().

> > + WARN_ON(sysfs_create_link(&hub->dev->kobj, &udev->dev.kobj, link_name));
>
> Does this need to be done underneath the 'hub->lock'? It would be nice
> to only hold the mutex while modifying the 'udev_list'. Same applies for
> calling set_udev_link_name().

Not strictly speaking, it just makes the code flow a bit simpler and there
shouldn't be much contention. I can change the code to have a dedicated
error path instead.

> > +
> > +unlock:
> > + mutex_unlock(&hub->lock);
> > +
> > + return ret;
> > +}
> > +
> > +static void onboard_hub_remove_usbdev(struct onboard_hub *hub, struct usb_device *udev)
>
> const udev?

ok

> > +{
> > + struct usbdev_node *node;
> > + char link_name[64];
> > +
> > + set_udev_link_name(udev, link_name, sizeof(link_name));
> > + sysfs_remove_link(&hub->dev->kobj, link_name);
> > +
> > + mutex_lock(&hub->lock);
> > +
> > + list_for_each_entry(node, &hub->udev_list, list) {
> > + if (node->udev == udev) {
> > + list_del(&node->list);
>
> Maybe worth noting here that we don't free 'node' because it will be
> freed when the hub platform driver is unbound. Of course, we could shave
> some bytes and free the node here instead of later by not using devm.

Before adding a comment I prefer not to use devm and free the node here.

> > + break;
> > + }
> > + }
> > +
> > + mutex_unlock(&hub->lock);
> > +}
> > +
> > +static ssize_t always_powered_in_suspend_show(struct device *dev, struct device_attribute *attr,
> > + char *buf)
> > +{
> > + struct onboard_hub *hub = dev_get_drvdata(dev);
>
> const?

will change

> > ...
> >
> > +static int onboard_hub_probe(struct platform_device *pdev)
> > +{
> > + struct device *dev = &pdev->dev;
> > + struct onboard_hub *hub;
> > + int err;
> > +
> > + hub = devm_kzalloc(dev, sizeof(*hub), GFP_KERNEL);
> > + if (!hub)
> > + return -ENOMEM;
> > +
> > + hub->vdd = devm_regulator_get(dev, "vdd");
> > + if (IS_ERR(hub->vdd))
> > + return PTR_ERR(hub->vdd);
> > +
> > + hub->dev = dev;
> > + mutex_init(&hub->lock);
> > + INIT_LIST_HEAD(&hub->udev_list);
> > +
> > + dev_set_drvdata(dev, hub);
> > +
> > + err = onboard_hub_power_on(hub);
> > + if (err)
> > + return err;
> > +
> > + /*
> > + * The USB driver might have been detached from the USB devices by
> > + * onboard_hub_remove(), make sure to re-attach it if needed.
> > + */
> > + err = driver_attach(&onboard_hub_usbdev_driver.drvwrap.driver);
> > + if (err) {
> > + onboard_hub_power_off(hub);
> > + return err;
>
> drop return
>
> > + }
> > +
> > + return 0;
>
> and then
>
> return err;

I would prefer to keep things as they are, IMO the code flow is clearer and
the fact that the function has one statement less doesn't have any impact in
practice.

> > ...
> >
> > +/*
> > + * Returns the onboard_hub platform device that is associated with the USB
> > + * device passed as parameter.
> > + */
> > +static struct onboard_hub *_find_onboard_hub(struct device *dev)
> > +{
> > + struct platform_device *pdev;
> > + struct device_node *np;
> > +
> > + pdev = of_find_device_by_node(dev->of_node);
> > + if (!pdev) {
> > + np = of_parse_phandle(dev->of_node, "companion-hub", 0);
> > + if (!np) {
> > + dev_err(dev, "failed to find device node for companion hub\n");
> > + return ERR_PTR(-EINVAL);
> > + }
> > +
> > + pdev = of_find_device_by_node(np);
> > + of_node_put(np);
> > +
> > + if (!pdev || !device_is_bound(&pdev->dev))
>
> Should we put_device(pdev) if !device_is_bound()?

ack

>
> > + return ERR_PTR(-EPROBE_DEFER);
> > + }
> > +
> > + put_device(&pdev->dev);
> > +
> > + return dev_get_drvdata(&pdev->dev);
>
> Should we hold pdev reference until we extract driver data out of it?
> i.e.
>
> ret = dev_get_drvdata(&pdev->dev);
> put_device(&pdev->dev);
>
> return ret;

will change as suggested

> > +}
> > +
> > +static int onboard_hub_usbdev_probe(struct usb_device *udev)
> > +{
> > + struct device *dev = &udev->dev;
> > + struct onboard_hub *hub;
> > + int err;
> > +
> > + /* ignore supported hubs without device tree node */
> > + if (!dev->of_node)
> > + return -ENODEV;
> > +
> > + hub = _find_onboard_hub(dev);
> > + if (IS_ERR(hub))
> > + return PTR_ERR(hub);
> > +
> > + dev_set_drvdata(dev, hub);
> > +
> > + err = onboard_hub_add_usbdev(hub, udev);
> > + if (err)
> > + return err;
> > +
> > + err = sysfs_create_link(&udev->dev.kobj, &hub->dev->kobj, "onboard_hub_dev");
> > + if (err)
> > + dev_warn(&udev->dev, "failed to create symlink to platform device: %d\n", err);
>
> Might be useful to know which platform device this is trying to link to.
> Can the devname(hub->dev) be printed as well?

Ok, I'll add the device name

> > +
> > + return 0;
> > +}
> > +
> > +static void onboard_hub_usbdev_disconnect(struct usb_device *udev)
> > +{
> > + struct onboard_hub *hub = dev_get_drvdata(&udev->dev);
> > +
> > + sysfs_remove_link(&udev->dev.kobj, "onboard_hub_dev");
> > +
> > + onboard_hub_remove_usbdev(hub, udev);
> > +}
> > +
> > +static const struct usb_device_id onboard_hub_id_table[] = {
> > + { USB_DEVICE(VENDOR_ID_REALTEK, 0x0411) }, /* RTS5411 USB 3.1 */
> > + { USB_DEVICE(VENDOR_ID_REALTEK, 0x5411) }, /* RTS5411 USB 2.1 */
> > + { USB_DEVICE(VENDOR_ID_REALTEK, 0x0414) }, /* RTS5414 USB 3.2 */
> > + { USB_DEVICE(VENDOR_ID_REALTEK, 0x5414) }, /* RTS5414 USB 2.1 */
> > + {},
>
> Nitpick: Drop comma so nothing can come after without a compile error.

ok

>
> > +};
> > +
>
> Nitpick: Drop newline here.

ok

> > ...
> >
> > +/*
> > + * Creates a platform device for each supported onboard hub that is connected to
> > + * the given parent hub. To keep track of the platform devices they are added to
> > + * a list that is owned by the parent hub.
> > + */
>
> As this is an exported symbol can you please add kernel doc?

will add

> > +void onboard_hub_create_pdevs(struct usb_device *parent_hub, struct list_head *pdev_list)
>
> Can parent_hub be const?

That would make the compiler unhappy, since usb_of_get_device_node() and
of_platform_device_create() expect non-const parameters.

> > +{
> > + int i;
> > + struct device_node *np, *npc;
> > + struct platform_device *pdev = NULL;
> > + struct pdev_list_entry *pdle;
> > +
> > + INIT_LIST_HEAD(pdev_list);
> > +
> > + for (i = 1; i <= parent_hub->maxchild; i++) {
> > + np = usb_of_get_device_node(parent_hub, i);
> > + if (!np)
> > + continue;
> > +
> > + if (!of_is_onboard_usb_hub(np))
> > + goto node_put;
> > +
> > + npc = of_parse_phandle(np, "companion-hub", 0);
> > + if (npc) {
> > + pdev = of_find_device_by_node(npc);
> > + of_node_put(npc);
> > + }
> > +
> > + if (pdev) {
> > + /* the companion hub already has a platform device, nothing to do here */
> > + put_device(&pdev->dev);
> > + goto node_put;
> > + }
> > +
> > + pdev = of_platform_device_create(np, NULL, &parent_hub->dev);
> > + if (!pdev) {
> > + dev_err(&parent_hub->dev,
> > + "failed to create platform device for onboard hub '%pOF'\n", np);
> > + goto node_put;
> > + }
> > +
> > + pdle = devm_kzalloc(&pdev->dev, sizeof(*pdle), GFP_KERNEL);
> > + if (!pdle) {
> > + of_platform_device_destroy(&pdev->dev, NULL);
> > + goto node_put;
> > + }
> > +
> > + pdle->pdev = pdev;
> > + list_add(&pdle->node, pdev_list);
> > +
> > +node_put:
> > + of_node_put(np);
> > + }
> > +}
> > +EXPORT_SYMBOL_GPL(onboard_hub_create_pdevs);
> > +
> > +/*
> > + * Destroys the platform devices in the given list and frees the memory associated
> > + * with the list entry.
>
> kerneldoc?

will add

> > + */
> > +void onboard_hub_destroy_pdevs(struct list_head *pdev_list)
> > +{
> > + struct pdev_list_entry *pdle, *tmp;
> > +
> > + list_for_each_entry_safe(pdle, tmp, pdev_list, node) {
> > + list_del(&pdle->node);
> > + of_platform_device_destroy(&pdle->pdev->dev, NULL);
> > + }
> > +}
> > +EXPORT_SYMBOL_GPL(onboard_hub_destroy_pdevs);
> > +

\
 
 \ /
  Last update: 2022-01-13 19:38    [W:0.073 / U:0.088 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site