lkml.org 
[lkml]   [2022]   [Jan]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH] arm64: dts: meson-sm1: add spdifin spdifout nodes
From
Date
On 03/01/2022 16:35, Jerome Brunet wrote:
>
> On Wed 15 Dec 2021 at 11:02, Artem Lapkin <email2tema@gmail.com> wrote:
>
>> Add spdifin spdifout nodes for Amlogic SM1 SoCs.
> ^ add (same in the title)
>
>>
>> Signed-off-by: Artem Lapkin <art@khadas.com>
>> ---
>>
>> SPDIF IN and SPDIF OUT both tested and works fine for VIM3L (meson-sm1)
>> same as for VIM3 (meson-g12)
>>
>> SPDIF in and SPDIF OUT both pins available via GPIO header (SPDIF_OUT PIN
>> 13 spdif_ao_out_pins and SPDIF_IN PIN 35 - same PWM_F spdif_in_h_pins)
>>
>> https://lore.kernel.org/linux-arm-kernel/1jtuhwvqxa.fsf@starbuckisacylon.baylibre.com/t/
>>
>> ALSA spdifin test example
>> =========================
>>
>> # arecord -fS16_LE -r48000 -c2 -Dplug:spdifin
>>
>> # cat .asoundrc
>> pcm.spdifin {
>> type iec958
>> slave {
>> pcm "hw:0,1"
>> format IEC958_SUBFRAME_LE
>> }
>> }
>>
>> DT sound card configs for testing
>> =================================
>>
>> &spdifout {
>> pinctrl-0 = <&spdif_ao_out_pins>;
>> pinctrl-names = "default";
>> status = "okay";
>> };
>>
>> &spdifin {
>> pinctrl-0 = <&spdif_in_h_pins>;
>> pinctrl-names = "default";
>> status = "okay";
>> };
>>
>> ...
>> spdif_dit: audio-codec-1 {
>> #sound-dai-cells = <0>;
>> compatible = "linux,spdif-dit";
>> status = "okay";
>> sound-name-prefix = "DIT";
>> };
>>
>> spdif_dir: audio-codec-2 {
>> #sound-dai-cells = <0>;
>> compatible = "linux,spdif-dir";
>> status = "okay";
>> sound-name-prefix = "DIR";
>> };
>> ...
>> audio-routing = ...
>> "TODDR_B IN 3", "SPDIFIN Capture",
>> "SPDIFOUT IN 0", "FRDDR_A OUT 3";
>>
>> ...
>> dai-link-10 {
>> sound-dai = <&spdifout>;
>>
>> codec-0 {
>> sound-dai = <&spdif_dit>;
>> };
>> };
>>
>> /* spdif or toslink interface */
>> dai-link-11 {
>> sound-dai = <&spdifin>;
>>
>> codec-0 {
>> sound-dai = <&spdif_dir>;
>> };
>> };
>> ...
>>
>> ---
>> arch/arm64/boot/dts/amlogic/meson-sm1.dtsi | 27 ++++++++++++++++++++++
>> 1 file changed, 27 insertions(+)
>>
>> diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1.dtsi b/arch/arm64/boot/dts/amlogic/meson-sm1.dtsi
>> index 3d8b1f4f2001..1e0adf259d61 100644
>> --- a/arch/arm64/boot/dts/amlogic/meson-sm1.dtsi
>> +++ b/arch/arm64/boot/dts/amlogic/meson-sm1.dtsi
>> @@ -356,6 +356,33 @@ tdmin_lb: audio-controller@3c0 {
>> status = "disabled";
>> };
>>
>> + spdifin: audio-controller@400 {
>> + compatible = "amlogic,g12a-spdifin",
>> + "amlogic,axg-spdifin";
>> + reg = <0x0 0x400 0x0 0x30>;
>> + #sound-dai-cells = <0>;
>> + sound-name-prefix = "SPDIFIN";
>> + interrupts = <GIC_SPI 151 IRQ_TYPE_EDGE_RISING>;
>> + clocks = <&clkc_audio AUD_CLKID_SPDIFIN>,
>> + <&clkc_audio AUD_CLKID_SPDIFIN_CLK>;
>> + clock-names = "pclk", "refclk";
>> + resets = <&clkc_audio AUD_RESET_SPDIFIN>;
>> + status = "disabled";
>> + };
>> +
>> + spdifout: audio-controller@480 {
>
> Node should still be named spdifout_a, even if the spdifout_b is not added yet
>
>> + compatible = "amlogic,g12a-spdifout",
>> + "amlogic,axg-spdifout";
>> + reg = <0x0 0x480 0x0 0x50>;
>> + #sound-dai-cells = <0>;
>> + sound-name-prefix = "SPDIFOUT";
>
> Same here
>
>> + clocks = <&clkc_audio AUD_CLKID_SPDIFOUT>,
>> + <&clkc_audio AUD_CLKID_SPDIFOUT_CLK>;
>> + clock-names = "pclk", "mclk";
>> + resets = <&clkc_audio AUD_RESET_SPDIFOUT>;
>> + status = "disabled";
>> + };
>> +
>> tdmout_a: audio-controller@500 {
>> compatible = "amlogic,sm1-tdmout";
>> reg = <0x0 0x500 0x0 0x40>;
>

All these fixed while applying, no need to send a new version.

Neil

\
 
 \ /
  Last update: 2022-01-12 09:58    [W:0.056 / U:3.612 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site