lkml.org 
[lkml]   [2022]   [Jan]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH V4 0/5] the UART driver compatible with
From
Date
Hi,

On 10/01/2022 09:55, Yu Tu wrote:
> Using the common Clock code to describe the UART baud rate
> clock makes it easier for the UART driver to be compatible
> with the baud rate requirements of the UART IP on different
> meson chips. Add Meson S4 SoC compatible.
>
> Yu Tu (5):
> dt-bindings: serial: meson: Drop compatible = amlogic,meson-gx-uart.
> tty: serial: meson: Request the register region in meson_uart_probe()
> tty: serial: meson: The UART baud rate calculation is described using
> the common clock code.
> tty: serial: meson: Make the bit24 and bit [26,27] of the UART_REG5
> register writable
> tty: serial: meson: Added S4 SOC compatibility.

Weird, the subjects are fine in the cover letter but are all truncated in the email thread:
[PATCH V4 0/5] the UART driver compatible with
[PATCH V4 1/5] dt-bindings: serial: meson: Drop
[PATCH V4 2/5] tty: serial: meson: Request the register
...
Only the last one is OK.


>
> V1 -> V2: Use CCF to describe the UART baud rate clock.Make some changes as
> discussed in the email
> V2 -> V3: add compatible = "amlogic,meson-gx-uart". Because it must change
> the DTS before it can be deleted
> V3 -> V4: Change CCF to describe the UART baud rate clock as discussed
> in the email.
>
> Link:https://lore.kernel.org/linux-amlogic/20211230102110.3861-4-yu.tu@amlogic.com/
>
> .../bindings/serial/amlogic,meson-uart.yaml | 10 +-
> drivers/tty/serial/meson_uart.c | 244 ++++++++++++------
> 2 files changed, 177 insertions(+), 77 deletions(-)
>

\
 
 \ /
  Last update: 2022-01-10 10:29    [W:0.115 / U:0.152 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site