lkml.org 
[lkml]   [2021]   [Sep]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH 2/7] arm64: dts: qcom: msm8998-xperia: Add RMI4 touchscreen support
From
Date
Il 07/09/21 15:41, Bjorn Andersson ha scritto:
> On Fri 03 Sep 11:09 PDT 2021, AngeloGioacchino Del Regno wrote:
>
>> All of the devices in the Sony Yoshino platform are using a Synaptics
>> RMI4-compatible touch IC with identical pins and supplies: enable the
>> I2C-5 bus and add the rmi4-i2c node along with the required pin
>> configurations.
>>
>> Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
>> Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>
>> ---
>> .../dts/qcom/msm8998-sony-xperia-yoshino.dtsi | 60 +++++++++++++++++++
>> 1 file changed, 60 insertions(+)
>>
>> diff --git a/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino.dtsi b/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino.dtsi
>> index b07cbc759807..2fe53e4675d5 100644
>> --- a/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino.dtsi
>> +++ b/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino.dtsi
>> @@ -30,6 +30,15 @@ board_vbat: vbat-regulator {
>> regulator-boot-on;
>> };
>>
>> + touch_vddio_vreg: touch-vddio-vreg {
>> + compatible = "regulator-fixed";
>> + regulator-name = "touch_vddio_vreg";
>> + startup-delay-us = <10000>;
>> + gpio = <&tlmm 133 GPIO_ACTIVE_HIGH>;
>> + pinctrl-names = "default";
>> + pinctrl-0 = <&ts_vddio_en>;
>> + };
>> +
>> vph_pwr: vph-pwr-regulator {
>> compatible = "regulator-fixed";
>> regulator-name = "vph_pwr";
>> @@ -134,6 +143,42 @@ ramoops@ffc00000 {
>> };
>> };
>>
>> +&blsp1_i2c5 {
>> + status = "okay";
>> + clock-frequency = <355000>;
>> +
>> + touchscreen: synaptics-rmi4-i2c@2c {
>
> "touchscreen" sounds like a better "generic name" for the node.
>
> Haven't checked the following patches yet, do you need the label?
>

Thank you, I forgot to remove the label after a cleanup.
Also, node name changed.

Cheers,
- Angelo

> Regards,
> Bjorn
>
>> + compatible = "syna,rmi4-i2c";
>> + reg = <0x2c>;
>> + #address-cells = <1>;
>> + #size-cells = <0>;
>> + interrupts-extended = <&tlmm 125 IRQ_TYPE_EDGE_FALLING>;
>> +
>> + pinctrl-names = "default";
>> + pinctrl-0 = <&ts_int_n>;
>> +
>> + vdd-supply = <&vreg_l28_3p0>;
>> + vio-supply = <&touch_vddio_vreg>;
>> +
>> + syna,reset-delay-ms = <220>;
>> + syna,startup-delay-ms = <1000>;
>> +
>> + rmi4-f01@1 {
>> + reg = <0x01>;
>> + syna,nosleep-mode = <1>;
>> + };
>> +
>> + rmi4-f11@11 {
>> + reg = <0x11>;
>> + syna,sensor-type = <1>;
>> + };
>> + };
>> +};
>> +
>> +&blsp1_i2c5_sleep {
>> + bias-disable;
>> +};
>> +
>> &blsp2_uart1 {
>> status = "okay";
>> };
>> @@ -448,6 +493,21 @@ hall_sensor0_default: acc-cover-open {
>> drive-strength = <2>;
>> input-enable;
>> };
>> +
>> + ts_int_n: ts-int-n {
>> + pins = "gpio125";
>> + function = "gpio";
>> + drive-strength = <8>;
>> + bias-pull-up;
>> + };
>> +
>> + ts_vddio_en: ts-vddio-en-default {
>> + pins = "gpio133";
>> + function = "gpio";
>> + bias-disable;
>> + drive-strength = <2>;
>> + output-low;
>> + };
>> };
>>
>> /*
>> --
>> 2.32.0
>>

\
 
 \ /
  Last update: 2021-09-09 13:26    [W:0.102 / U:0.072 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site