lkml.org 
[lkml]   [2021]   [Sep]   [30]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH] iio: adc: nau7802: convert probe to full device-managed
On Sun, 26 Sep 2021 18:49:32 +0300
Alexandru Ardelean <aardelean@deviqon.com> wrote:

> This is a trivial conversion to device-managed functions.
> The mutex_destroy() calls are redundant, as the data will be free'd anyway.
>
> And the IRQ and IIO register functions both have device-managed
> equivalents.
>
> Signed-off-by: Alexandru Ardelean <aardelean@deviqon.com>

+CC Maxime and Alexandre.

Looks simple enough to me that I won't wait on their replies to queue it up.
Obviously feedback welcome though!

Applied to the togreg branch of iio.git and pushed out as testing for 0-day
to see if it can find stuff we missed.

Thanks,

Jonathan


> ---
> drivers/iio/adc/nau7802.c | 50 +++++++--------------------------------
> 1 file changed, 9 insertions(+), 41 deletions(-)
>
> diff --git a/drivers/iio/adc/nau7802.c b/drivers/iio/adc/nau7802.c
> index bb70b51d25b1..976c235f3079 100644
> --- a/drivers/iio/adc/nau7802.c
> +++ b/drivers/iio/adc/nau7802.c
> @@ -428,8 +428,6 @@ static int nau7802_probe(struct i2c_client *client,
>
> st = iio_priv(indio_dev);
>
> - i2c_set_clientdata(client, indio_dev);
> -
> indio_dev->name = dev_name(&client->dev);
> indio_dev->modes = INDIO_DIRECT_MODE;
> indio_dev->info = &nau7802_info;
> @@ -495,13 +493,13 @@ static int nau7802_probe(struct i2c_client *client,
> * will enable them back when we will need them..
> */
> if (client->irq) {
> - ret = request_threaded_irq(client->irq,
> - NULL,
> - nau7802_eoc_trigger,
> - IRQF_TRIGGER_HIGH | IRQF_ONESHOT |
> - IRQF_NO_AUTOEN,
> - client->dev.driver->name,
> - indio_dev);
> + ret = devm_request_threaded_irq(&client->dev, client->irq,
> + NULL,
> + nau7802_eoc_trigger,
> + IRQF_TRIGGER_HIGH | IRQF_ONESHOT |
> + IRQF_NO_AUTOEN,
> + client->dev.driver->name,
> + indio_dev);
> if (ret) {
> /*
> * What may happen here is that our IRQ controller is
> @@ -526,7 +524,7 @@ static int nau7802_probe(struct i2c_client *client,
> ret = i2c_smbus_write_byte_data(st->client, NAU7802_REG_CTRL2,
> NAU7802_CTRL2_CRS(st->sample_rate));
> if (ret)
> - goto error_free_irq;
> + return ret;
> }
>
> /* Setup the ADC channels available on the board */
> @@ -536,36 +534,7 @@ static int nau7802_probe(struct i2c_client *client,
> mutex_init(&st->lock);
> mutex_init(&st->data_lock);
>
> - ret = iio_device_register(indio_dev);
> - if (ret < 0) {
> - dev_err(&client->dev, "Couldn't register the device.\n");
> - goto error_device_register;
> - }
> -
> - return 0;
> -
> -error_device_register:
> - mutex_destroy(&st->lock);
> - mutex_destroy(&st->data_lock);
> -error_free_irq:
> - if (client->irq)
> - free_irq(client->irq, indio_dev);
> -
> - return ret;
> -}
> -
> -static int nau7802_remove(struct i2c_client *client)
> -{
> - struct iio_dev *indio_dev = i2c_get_clientdata(client);
> - struct nau7802_state *st = iio_priv(indio_dev);
> -
> - iio_device_unregister(indio_dev);
> - mutex_destroy(&st->lock);
> - mutex_destroy(&st->data_lock);
> - if (client->irq)
> - free_irq(client->irq, indio_dev);
> -
> - return 0;
> + return devm_iio_device_register(&client->dev, indio_dev);
> }
>
> static const struct i2c_device_id nau7802_i2c_id[] = {
> @@ -582,7 +551,6 @@ MODULE_DEVICE_TABLE(of, nau7802_dt_ids);
>
> static struct i2c_driver nau7802_driver = {
> .probe = nau7802_probe,
> - .remove = nau7802_remove,
> .id_table = nau7802_i2c_id,
> .driver = {
> .name = "nau7802",

\
 
 \ /
  Last update: 2021-09-30 18:07    [W:0.074 / U:0.084 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site