lkml.org 
[lkml]   [2021]   [Sep]   [30]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 8/8] arm64: dts: imx8mm-kontron: Leave reg_vdd_arm always powered on
Date
From: Frieder Schrempf <frieder.schrempf@kontron.de>

When the cpufreq driver is enabled, the buck2 regulator is kept powered on
by the dependency between the CPU nodes with 'cpu-supply' set. Without the
cpufreq driver the kernel will power off the regulator as it doesn't see
any users. This is obviously not what we want, therefore keep the regulator
powered on in any case.

Reported-by: Heiko Thiery <heiko.thiery@gmail.com>
Fixes: 21c4f45b335f ("arm64: dts: Add the Kontron i.MX8M Mini SoMs and baseboards")
Cc: stable@vger.kernel.org
Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
---
arch/arm64/boot/dts/freescale/imx8mm-kontron-n801x-som.dtsi | 1 +
1 file changed, 1 insertion(+)

diff --git a/arch/arm64/boot/dts/freescale/imx8mm-kontron-n801x-som.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-kontron-n801x-som.dtsi
index 213014f59b46..c3418d263eb4 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-kontron-n801x-som.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mm-kontron-n801x-som.dtsi
@@ -105,6 +105,7 @@ reg_vdd_arm: BUCK2 {
regulator-min-microvolt = <850000>;
regulator-max-microvolt = <950000>;
regulator-boot-on;
+ regulator-always-on;
regulator-ramp-delay = <3125>;
nxp,dvs-run-voltage = <950000>;
nxp,dvs-standby-voltage = <850000>;
--
2.33.0
\
 
 \ /
  Last update: 2021-09-30 17:57    [W:0.158 / U:0.512 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site