lkml.org 
[lkml]   [2021]   [Sep]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v5 08/14] iommu/dart: Exclude MSI doorbell from PCIe device IOVA range
Date
The MSI doorbell on Apple HW can be any address in the low 4GB
range. However, the MSI write is matched by the PCIe block before
hitting the iommu. It must thus be excluded from the IOVA range
that is assigned to any PCIe device.

Reviewed-by: Sven Peter <sven@svenpeter.dev>
Tested-by: Alyssa Rosenzweig <alyssa@rosenzweig.io>
Signed-off-by: Marc Zyngier <maz@kernel.org>
---
drivers/iommu/apple-dart.c | 27 +++++++++++++++++++++++++++
drivers/pci/controller/Kconfig | 5 +++++
drivers/pci/controller/pcie-apple.c | 4 +++-
3 files changed, 35 insertions(+), 1 deletion(-)

diff --git a/drivers/iommu/apple-dart.c b/drivers/iommu/apple-dart.c
index 559db9259e65..f1f1f024c604 100644
--- a/drivers/iommu/apple-dart.c
+++ b/drivers/iommu/apple-dart.c
@@ -721,6 +721,31 @@ static int apple_dart_def_domain_type(struct device *dev)
return 0;
}

+#ifndef CONFIG_PCIE_APPLE_MSI_DOORBELL_ADDR
+/* Keep things compiling when CONFIG_PCI_APPLE isn't selected */
+#define CONFIG_PCIE_APPLE_MSI_DOORBELL_ADDR 0
+#endif
+#define DOORBELL_ADDR (CONFIG_PCIE_APPLE_MSI_DOORBELL_ADDR & PAGE_MASK)
+
+static void apple_dart_get_resv_regions(struct device *dev,
+ struct list_head *head)
+{
+ if (IS_ENABLED(CONFIG_PCIE_APPLE) && dev_is_pci(dev)) {
+ struct iommu_resv_region *region;
+ int prot = IOMMU_WRITE | IOMMU_NOEXEC | IOMMU_MMIO;
+
+ region = iommu_alloc_resv_region(DOORBELL_ADDR,
+ PAGE_SIZE, prot,
+ IOMMU_RESV_MSI);
+ if (!region)
+ return;
+
+ list_add_tail(&region->list, head);
+ }
+
+ iommu_dma_get_resv_regions(dev, head);
+}
+
static const struct iommu_ops apple_dart_iommu_ops = {
.domain_alloc = apple_dart_domain_alloc,
.domain_free = apple_dart_domain_free,
@@ -737,6 +762,8 @@ static const struct iommu_ops apple_dart_iommu_ops = {
.device_group = apple_dart_device_group,
.of_xlate = apple_dart_of_xlate,
.def_domain_type = apple_dart_def_domain_type,
+ .get_resv_regions = apple_dart_get_resv_regions,
+ .put_resv_regions = generic_iommu_put_resv_regions,
.pgsize_bitmap = -1UL, /* Restricted during dart probe */
};

diff --git a/drivers/pci/controller/Kconfig b/drivers/pci/controller/Kconfig
index 814833a8120d..b6e7410da254 100644
--- a/drivers/pci/controller/Kconfig
+++ b/drivers/pci/controller/Kconfig
@@ -312,6 +312,11 @@ config PCIE_HISI_ERR
Say Y here if you want error handling support
for the PCIe controller's errors on HiSilicon HIP SoCs

+config PCIE_APPLE_MSI_DOORBELL_ADDR
+ hex
+ default 0xfffff000
+ depends on PCIE_APPLE
+
config PCIE_APPLE
tristate "Apple PCIe controller"
depends on ARCH_APPLE || COMPILE_TEST
diff --git a/drivers/pci/controller/pcie-apple.c b/drivers/pci/controller/pcie-apple.c
index 97af5d9f0bcb..a27dd93217f5 100644
--- a/drivers/pci/controller/pcie-apple.c
+++ b/drivers/pci/controller/pcie-apple.c
@@ -120,8 +120,10 @@
* The doorbell address is set to 0xfffff000, which by convention
* matches what MacOS does, and it is possible to use any other
* address (in the bottom 4GB, as the base register is only 32bit).
+ * However, it has to be excluded from the the IOVA range, and the
+ * DART driver has to know about it.
*/
-#define DOORBELL_ADDR 0xfffff000
+#define DOORBELL_ADDR CONFIG_PCIE_APPLE_MSI_DOORBELL_ADDR

struct apple_pcie {
struct mutex lock;
--
2.30.2
\
 
 \ /
  Last update: 2021-09-29 18:40    [W:0.181 / U:0.476 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site