lkml.org 
[lkml]   [2021]   [Sep]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    /
    From
    SubjectRE: [RFC 06/20] iommu: Add iommu_device_init[exit]_user_dma interfaces
    Date
    > From: David Gibson
    > Sent: Wednesday, September 29, 2021 2:35 PM
    >
    > On Wed, Sep 29, 2021 at 05:38:56AM +0000, Tian, Kevin wrote:
    > > > From: David Gibson <david@gibson.dropbear.id.au>
    > > > Sent: Wednesday, September 29, 2021 12:56 PM
    > > >
    > > > >
    > > > > Unlike vfio, iommufd adopts a device-centric design with all group
    > > > > logistics hidden behind the fd. Binding a device to iommufd serves
    > > > > as the contract to get security context established (and vice versa
    > > > > for unbinding). One additional requirement in iommufd is to manage
    > the
    > > > > switch between multiple security contexts due to decoupled
    > bind/attach:
    > > > >
    > > > > 1) Open a device in "/dev/vfio/devices" with user access blocked;
    > > >
    > > > Probably worth clarifying that (1) must happen for *all* devices in
    > > > the group before (2) happens for any device in the group.
    > >
    > > No. User access is naturally blocked for other devices as long as they
    > > are not opened yet.
    >
    > Uh... my point is that everything in the group has to be removed from
    > regular kernel drivers before we reach step (2). Is the plan that you
    > must do that before you can even open them? That's a reasonable
    > choice, but then I think you should show that step in this description
    > as well.

    Agree. I think below proposal can meet above requirement and ensure
    it's not broken in the whole process when the group is operated by the
    userspace:

    https://lore.kernel.org/kvm/20210928140712.GL964074@nvidia.com/

    and definitely an updated description will be provided when sending out
    the new proposal.

    >
    > > > > 2) Bind the device to an iommufd with an initial security context
    > > > > (an empty iommu domain which blocks dma) established for its
    > > > > group, with user access unblocked;
    > > > >
    > > > > 3) Attach the device to a user-specified ioasid (shared by all devices
    > > > > attached to this ioasid). Before attaching, the device should be first
    > > > > detached from the initial context;
    > > >
    > > > So, this step can implicitly but observably change the behaviour for
    > > > other devices in the group as well. I don't love that kind of
    > > > difficult to predict side effect, which is why I'm *still* not totally
    > > > convinced by the device-centric model.
    > >
    > > which side-effect is predicted here? The user anyway needs to be
    > > aware of such group restriction regardless whether it uses group
    > > or nongroup interface.
    >
    > Yes, exactly. And with a group interface it's obvious it has to
    > understand it. With the non-group interface, you can get to this
    > stage in ignorance of groups. It will even work as long as you are
    > lucky enough only to try with singleton-group devices. Then you try
    > it with two devices in the one group and doing (3) on device A will
    > implicitly change the DMA environment of device B.

    for non-group we can also document it obviously in uAPI that the user
    must understand group restriction and violating it will get failure
    when attaching to different IOAS's for devices in the same group.

    Thanks
    Kevin

    \
     
     \ /
      Last update: 2021-09-29 09:33    [W:3.569 / U:0.028 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site