lkml.org 
[lkml]   [2021]   [Sep]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [RESEND PATCH v2 1/4] mfd: sec-irq: Do not enforce (incorrect) interrupt trigger type
On Wed, 02 Jun 2021, Krzysztof Kozlowski wrote:

> From: Krzysztof Kozlowski <krzk@kernel.org>
>
> Interrupt line can be configured on different hardware in different way,
> even inverted. Therefore driver should not enforce specific trigger
> type - edge falling - but instead rely on Devicetree to configure it.
>
> The Samsung PMIC drivers are used only on Devicetree boards.
>
> Additionally, the PMIC datasheets describe the interrupt line as active
> low with a requirement of acknowledge from the CPU therefore the edge
> falling is not correct.
>
> Marek Szyprowski reports that together with DTS change (proper level in
> DTS) it fixes RTC alarm failure that he observed from time to time on
> TM2e board.
>
> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
> Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
>
> ---
>
> Rebased on https://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd.git/log/?h=for-mfd-next
>
> Changes since v1:
> 1. Mention in commit msg that this fixes TM2e RTC alarm.
> 2. Add Marek's tested-by.
> ---
> drivers/mfd/sec-irq.c | 3 +--
> 1 file changed, 1 insertion(+), 2 deletions(-)

Applied, thanks.

--
Lee Jones [李琼斯]
Senior Technical Lead - Developer Services
Linaro.org │ Open source software for Arm SoCs
Follow Linaro: Facebook | Twitter | Blog

\
 
 \ /
  Last update: 2021-09-28 11:53    [W:0.165 / U:0.048 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site