lkml.org 
[lkml]   [2021]   [Sep]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v2 4/4] s390/pci: implement minimal PCI error recovery
On Tue, Sep 28, 2021 at 08:30:44PM +0200, Niklas Schnelle wrote:
> On Tue, 2021-09-28 at 13:11 -0500, Bjorn Helgaas wrote:
> > On Thu, Sep 16, 2021 at 11:33:36AM +0200, Niklas Schnelle wrote:
> > > When the platform detects an error on a PCI function or a service action
> > > has been performed it is put in the error state and an error event
> > > notification is provided to the OS.
> > >
> > > Currently we treat all error event notifications the same and simply set
> > > pdev->error_state = pci_channel_io_perm_failure requiring user
> > > intervention such as use of the recover attribute to get the device
> > > usable again. Despite requiring a manual step this also has the
> > > disadvantage that the device is completely torn down and recreated
> > > resulting in higher level devices such as a block or network device
> > > being recreated. In case of a block device this also means that it may
> > > need to be removed and added to a software raid even if that could
> > > otherwise survive with a temporary degradation.
> > >
> > > This is of course not ideal more so since an error notification with PEC
> > > 0x3A indicates that the platform already performed error recovery
> > > successfully or that the error state was caused by a service action that
> > > is now finished.
> > >
> > > At least in this case we can assume that the error state can be reset
> > > and the function made usable again. So as not to have the disadvantage
> > > of a full tear down and recreation we need to coordinate this recovery
> > > with the driver. Thankfully there is already a well defined recovery
> > > flow for this described in Documentation/PCI/pci-error-recovery.rst.
> > >
> > > The implementation of this is somewhat straight forward and simplified
> > > by the fact that our recovery flow is defined per PCI function. As
> > > a reset we use the newly introduced zpci_hot_reset_device() which also
> > > takes the PCI function out of the error state.
> > >
> > > Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
> > > ---
> > > v1 -> v2:
> > > - Dropped use of pci_dev_is_added(), pdev->driver check is enough
> > > - Improved some comments and messages
> > >
> > > arch/s390/include/asm/pci.h | 4 +-
> > > arch/s390/pci/pci.c | 49 ++++++++++
> > > arch/s390/pci/pci_event.c | 182 +++++++++++++++++++++++++++++++++++-
> > > 3 files changed, 233 insertions(+), 2 deletions(-)
> > >
> > > diff --git a/arch/s390/include/asm/pci.h b/arch/s390/include/asm/pci.h
> > > index 2a2ed165a270..558877aff2e5 100644
> > > --- a/arch/s390/include/asm/pci.h
> > > +++ b/arch/s390/include/asm/pci.h
> > > @@ -294,8 +294,10 @@ void zpci_debug_exit(void);
> > > void zpci_debug_init_device(struct zpci_dev *, const char *);
> > > void zpci_debug_exit_device(struct zpci_dev *);
> > >
> > > -/* Error reporting */
> > > +/* Error handling */
> > > int zpci_report_error(struct pci_dev *, struct zpci_report_error_header *);
> > > +int zpci_clear_error_state(struct zpci_dev *zdev);
> > > +int zpci_reset_load_store_blocked(struct zpci_dev *zdev);
> > >
> > > #ifdef CONFIG_NUMA
> > >
> > > diff --git a/arch/s390/pci/pci.c b/arch/s390/pci/pci.c
> > > index dce60f16e94a..b987c9d76510 100644
> > > --- a/arch/s390/pci/pci.c
> > > +++ b/arch/s390/pci/pci.c
> > > @@ -954,6 +954,55 @@ int zpci_report_error(struct pci_dev *pdev,
> > > }
> > > EXPORT_SYMBOL(zpci_report_error);
> > >
> > > +/**
> > > + * zpci_clear_error_state() - Clears the zPCI error state of the device
> > > + * @zdev: The zdev for which the zPCI error state should be reset
> > > + *
> > > + * Clear the zPCI error state of the device. If clearing the zPCI error state
> > > + * fails the device is left in the error state. In this case it may make sense
> > > + * to call zpci_io_perm_failure() on the associated pdev if it exists.
> > > + *
> > > + * Returns: 0 on success, -EIO otherwise
> > > + */
> > > +int zpci_clear_error_state(struct zpci_dev *zdev)
> > > +{
> > > + u64 req = ZPCI_CREATE_REQ(zdev->fh, 0, ZPCI_MOD_FC_RESET_ERROR);
> > > + struct zpci_fib fib = {0};
> > > + u8 status;
> > > + int rc;
> > > +
> > > + rc = zpci_mod_fc(req, &fib, &status);
> > > + if (rc)
> > > + return -EIO;
> > > +
> > > + return 0;
> > > +}
> > > +
> > > +/**
> > > + * zpci_reset_load_store_blocked() - Re-enables L/S from error state
> > > + * @zdev: The zdev for which to unblock load/store access
> > > + *
> > > + * R-eenables load/store access for a PCI function in the error state while
> > > + * keeping DMA blocked. In this state drivers can poke MMIO space to determine
> > > + * if error recovery is possible while catching any rogue DMA access from the
> > > + * device.
> > > + *
> > > + * Returns: 0 on success, -EIO otherwise
> > > + */
> > > +int zpci_reset_load_store_blocked(struct zpci_dev *zdev)
> > > +{
> > > + u64 req = ZPCI_CREATE_REQ(zdev->fh, 0, ZPCI_MOD_FC_RESET_BLOCK);
> > > + struct zpci_fib fib = {0};
> > > + u8 status;
> > > + int rc;
> > > +
> > > + rc = zpci_mod_fc(req, &fib, &status);
> > > + if (rc)
> > > + return -EIO;
> > > +
> > > + return 0;
> > > +}
> > > +
> > > static int zpci_mem_init(void)
> > > {
> > > BUILD_BUG_ON(!is_power_of_2(__alignof__(struct zpci_fmb)) ||
> > > diff --git a/arch/s390/pci/pci_event.c b/arch/s390/pci/pci_event.c
> > > index e868d996ec5b..73389e161872 100644
> > > --- a/arch/s390/pci/pci_event.c
> > > +++ b/arch/s390/pci/pci_event.c
> > > @@ -47,15 +47,182 @@ struct zpci_ccdf_avail {
> > > u16 pec; /* PCI event code */
> > > } __packed;
> > >
> > > +static inline bool ers_result_indicates_abort(pci_ers_result_t ers_res)
> > > +{
> > > + switch (ers_res) {
> > > + case PCI_ERS_RESULT_CAN_RECOVER:
> > > + case PCI_ERS_RESULT_RECOVERED:
> > > + case PCI_ERS_RESULT_NEED_RESET:
> > > + return false;
> > > + default:
> > > + return true;
> > > + }
> > > +}
> > > +
> > > +static pci_ers_result_t zpci_event_notify_error_detected(struct pci_dev *pdev)
> > > +{
> > > + pci_ers_result_t ers_res = PCI_ERS_RESULT_DISCONNECT;
> > > + struct pci_driver *driver = pdev->driver;
> > > +
> > > + pr_debug("%s: asking driver to determine recoverability\n", pci_name(pdev));
> > > + ers_res = driver->err_handler->error_detected(pdev, pdev->error_state);
> > > + if (ers_result_indicates_abort(ers_res))
> > > + pr_info("%s: driver can't recover\n", pci_name(pdev));
> > > + else if (ers_res == PCI_ERS_RESULT_NEED_RESET)
> > > + pr_debug("%s: driver needs reset to recover\n", pci_name(pdev));
> >
> > Are you following a convention of using pr_info(), etc here? I try to
> > use the pci_info() family (wrappers around dev_info()) whenever I can.
>
> A convention in the sense that so far all code under arch/s390/pci/
> uses pr_info() which comes out as "zpci: ..". It seems that similar
> pr_info() constructs are also common in other arch/s390/ and
> drivers/s390 code.

That sounds like a convention to me. As long as it exists, I would
follow it. Maybe somebody will decide someday to convert them all at
once, but that would be a separate project.

> On the other hand we already agreed that some of the s390 specific PCI
> code is more like a PCI controller. So I'm open to suggestions.
>

\
 
 \ /
  Last update: 2021-09-28 20:40    [W:0.796 / U:0.032 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site