lkml.org 
[lkml]   [2021]   [Sep]   [24]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v3] arm64: dts: marvell: add Globalscale MOCHAbin
On Thu, Sep 23, 2021 at 08:18:30PM +0200, Robert Marko wrote:
> Globalscale MOCHAbin is a Armada 7040 based development board.
>
> Specifications:
> * Armada 7040 Quad core ARMv8 Cortex A-72 @ 1.4GHz
> * 2 / 4 / 8 GB of DDR4 DRAM
> * 16 GB eMMC
> * 4MB SPI-NOR (Bootloader)
> * 1x M.2-2280 B-key socket (for SSD expansion, SATA3 only)
> * 1x M.2-2250 B-key socket (for modems, USB2.0 and I2C only)
> * 1x Mini-PCIe 3.0 (x1, USB2.0 and I2C)
> * 1x SATA 7+15 socket (SATA3)
> * 1x 16-pin (2×8) MikroBus Connector
> * 1x SIM card slot (Connected to the mini-PCIe and both M.2 slots)
> * 2x USB3.0 Type-A ports via SMSC USB5434B hub
> * Cortex 2x5 JTAG
> * microUSB port for UART (PL2303GL/PL2303SA onboard)
> * 1x 10G SFP+
> * 1x 1G SFP (Connected to 88E1512 PHY)
> * 1x 1G RJ45 with PoE PD (Connected to 88E1512 PHY)
> * 4x 1G RJ45 ports via Topaz 88E6141 switch
> * RTC with battery holder (SoC provided, requires CR2032 battery)
> * 1x 12V DC IN
> * 1x Power switch
> * 1x 12V fan header (3-pin, power only)
> * 1x mini-PCIe LED header (2x0.1" pins)
> * 1x M.2-2280 LED header (2x0.1" pins)
> * 6x Bootstrap jumpers
> * 1x Power LED (Green)
> * 3x Tri-color RGB LEDs (Controllable)
> * 1x Microchip ATECC608B secure element
>
> Note that 1G SFP and 1G WAN cannot be used at the same time as they are in
> parallel connected to the same PHY.
>
> Signed-off-by: Robert Marko <robert.marko@sartura.hr>

Reviewed-by: Andrew Lunn <andrew@lunn.ch>

Andrew

\
 
 \ /
  Last update: 2021-09-24 16:51    [W:0.085 / U:0.064 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site