Messages in this thread | | | From | <> | Subject | Re: [PATCH v4 01/17] clk: at91: re-factor clocks suspend/resume | Date | Thu, 23 Sep 2021 13:23:03 +0000 |
| |
On 23.09.2021 16:20, Claudiu Beznea wrote: > SAMA5D2 and SAMA7G5 have a special power saving mode (backup mode) where > most of the SoC's components are powered off (including PMC). Resuming > from this mode is done with the help of bootloader. Peripherals are not > aware of the power saving mode thus most of them are disabling clocks in > proper suspend API and re-enable them in resume API without taking into > account the previously setup rate. Moreover some of the peripherals are > acting as wakeup sources and are not disabling the clocks in this > scenario, when suspending. Since backup mode cuts the power for > peripherals, in resume part these clocks needs to be re-configured. > > The initial PMC suspend/resume code was designed only for SAMA5D2's PMC > (as it was the only one supporting backup mode). SAMA7G supports also > backup mode and its PMC is different (few new functionalities, different > registers offsets, different offsets in registers for each > functionalities). To address both SAMA5D2 and SAMA7G5 PMC add > .save_context()/.resume_context() support to each clocks driver and call > this from PMC driver. > > Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> > ---
I forgot to mention that this patch applies good on top of patch at [1].
Thank you, Claudiu Beznea
[1] https://lore.kernel.org/lkml/20210913082633.110168-1-clement.leger@bootlin.com/
| |