lkml.org 
[lkml]   [2021]   [Sep]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v5 2/2] virt: acrn: Introduce interfaces for virtual device creating/destroying
On Thu, Sep 23, 2021 at 10:51:42AM +0200, Greg KH wrote:
> On Thu, Sep 23, 2021 at 04:41:28PM +0800, Fei Li wrote:
> > From: Shuo Liu <shuo.a.liu@intel.com>
> >
> > The ACRN hypervisor can emulate a virtual device within hypervisor for a
> > Guest VM. The emulated virtual device can work without the ACRN
> > userspace after creation. The hypervisor do the emulation of that device.
> >
> > To support the virtual device creating/destroying, HSM provides the
> > following ioctls:
> > - ACRN_IOCTL_CREATE_VDEV
> > Pass data struct acrn_vdev from userspace to the hypervisor, and inform
> > the hypervisor to create a virtual device for a User VM.
> > - ACRN_IOCTL_DESTROY_VDEV
> > Pass data struct acrn_vdev from userspace to the hypervisor, and inform
> > the hypervisor to destroy a virtual device of a User VM.
> >
> > These new APIs will be used by user space code vm_add_hv_vdev and
> > vm_remove_hv_vdev in
> > https://github.com/projectacrn/acrn-hypervisor/blob/master/devicemodel/core/vmmapi.c
> >
> > Signed-off-by: Shuo Liu <shuo.a.liu@intel.com>
> > Signed-off-by: Fei Li <fei1.li@intel.com>
> > ---
> > drivers/virt/acrn/hsm.c | 24 ++++++++++++++++++++
> > drivers/virt/acrn/hypercall.h | 26 ++++++++++++++++++++++
> > include/uapi/linux/acrn.h | 42 +++++++++++++++++++++++++++++++++++
> > 3 files changed, 92 insertions(+)
> >
> > diff --git a/drivers/virt/acrn/hsm.c b/drivers/virt/acrn/hsm.c
> > index f567ca59d7c2..5419794fccf1 100644
> > --- a/drivers/virt/acrn/hsm.c
> > +++ b/drivers/virt/acrn/hsm.c
> > @@ -118,6 +118,7 @@ static long acrn_dev_ioctl(struct file *filp, unsigned int cmd,
> > struct acrn_msi_entry *msi;
> > struct acrn_pcidev *pcidev;
> > struct acrn_irqfd irqfd;
> > + struct acrn_vdev *vdev;
> > struct page *page;
> > u64 cstate_cmd;
> > int i, ret = 0;
> > @@ -266,6 +267,29 @@ static long acrn_dev_ioctl(struct file *filp, unsigned int cmd,
> > "Failed to deassign pci device!\n");
> > kfree(pcidev);
> > break;
> > + case ACRN_IOCTL_CREATE_VDEV:
> > + vdev = memdup_user((void __user *)ioctl_param,
> > + sizeof(struct acrn_vdev));
> > + if (IS_ERR(vdev))
> > + return PTR_ERR(vdev);
> > +
> > + ret = hcall_create_vdev(vm->vmid, virt_to_phys(vdev));
> > + if (ret < 0)
> > + dev_dbg(acrn_dev.this_device,
> > + "Failed to create virtual device!\n");
> > + kfree(vdev);
> > + break;
> > + case ACRN_IOCTL_DESTROY_VDEV:
> > + vdev = memdup_user((void __user *)ioctl_param,
> > + sizeof(struct acrn_vdev));
> > + if (IS_ERR(vdev))
> > + return PTR_ERR(vdev);
> > + ret = hcall_destroy_vdev(vm->vmid, virt_to_phys(vdev));
> > + if (ret < 0)
> > + dev_dbg(acrn_dev.this_device,
> > + "Failed to destroy virtual device!\n");
> > + kfree(vdev);
> > + break;
> > case ACRN_IOCTL_SET_PTDEV_INTR:
> > irq_info = memdup_user((void __user *)ioctl_param,
> > sizeof(struct acrn_ptdev_irq));
> > diff --git a/drivers/virt/acrn/hypercall.h b/drivers/virt/acrn/hypercall.h
> > index f0c78e52cebb..71d300821a18 100644
> > --- a/drivers/virt/acrn/hypercall.h
> > +++ b/drivers/virt/acrn/hypercall.h
> > @@ -43,6 +43,8 @@
> > #define HC_DEASSIGN_PCIDEV _HC_ID(HC_ID, HC_ID_PCI_BASE + 0x06)
> > #define HC_ASSIGN_MMIODEV _HC_ID(HC_ID, HC_ID_PCI_BASE + 0x07)
> > #define HC_DEASSIGN_MMIODEV _HC_ID(HC_ID, HC_ID_PCI_BASE + 0x08)
> > +#define HC_CREATE_VDEV _HC_ID(HC_ID, HC_ID_PCI_BASE + 0x09)
> > +#define HC_DESTROY_VDEV _HC_ID(HC_ID, HC_ID_PCI_BASE + 0x0A)
> >
> > #define HC_ID_PM_BASE 0x80UL
> > #define HC_PM_GET_CPU_STATE _HC_ID(HC_ID, HC_ID_PM_BASE + 0x00)
> > @@ -196,6 +198,30 @@ static inline long hcall_set_memory_regions(u64 regions_pa)
> > return acrn_hypercall1(HC_VM_SET_MEMORY_REGIONS, regions_pa);
> > }
> >
> > +/**
> > + * hcall_create_vdev() - Create a virtual device for a User VM
> > + * @vmid: User VM ID
> > + * @addr: Service VM GPA of the &struct acrn_vdev
> > + *
> > + * Return: 0 on success, <0 on failure
> > + */
> > +static inline long hcall_create_vdev(u64 vmid, u64 addr)
> > +{
> > + return acrn_hypercall2(HC_CREATE_VDEV, vmid, addr);
> > +}
> > +
> > +/**
> > + * hcall_destroy_vdev() - Destroy a virtual device of a User VM
> > + * @vmid: User VM ID
> > + * @addr: Service VM GPA of the &struct acrn_vdev
> > + *
> > + * Return: 0 on success, <0 on failure
> > + */
> > +static inline long hcall_destroy_vdev(u64 vmid, u64 addr)
> > +{
> > + return acrn_hypercall2(HC_DESTROY_VDEV, vmid, addr);
> > +}
> > +
> > /**
> > * hcall_assign_mmiodev() - Assign a MMIO device to a User VM
> > * @vmid: User VM ID
> > diff --git a/include/uapi/linux/acrn.h b/include/uapi/linux/acrn.h
> > index 470036d6b1ac..ccf47ed92500 100644
> > --- a/include/uapi/linux/acrn.h
> > +++ b/include/uapi/linux/acrn.h
> > @@ -441,6 +441,44 @@ struct acrn_mmiodev {
> > } res[ACRN_MMIODEV_RES_NUM];
> > };
> >
> > +/**
> > + * struct acrn_vdev - Info for creating or destroying a virtual device
> > + * @id: Union of identifier of the virtual device
> > + * @id.value: Raw data of the identifier
> > + * @id.fields.vendor: Vendor id of the virtual PCI device
> > + * @id.fields.device: Device id of the virtual PCI device
> > + * @id.fields.legacy_id: ID of the virtual device if not a PCI device
> > + * @slot: Virtual Bus/Device/Function of the virtual
> > + * device
> > + * @io_base: IO resource base address of the virtual device
> > + * @io_size: IO resource size of the virtual device
> > + * @args: Arguments for the virtual device creation
> > + *
> > + * The created virtual device can be a PCI device or a legacy device (e.g.
> > + * a virtual UART controller) and it is emulated by the hypervisor. This
> > + * structure will be passed to hypervisor directly.
> > + */
> > +struct acrn_vdev {
> > + /*
> > + * the identifier of the device, the low 32 bits represent the vendor
> > + * id and device id of PCI device and the high 32 bits represent the
> > + * device number of the legacy device
> > + */
> > + union {
> > + __u64 value;
> > + struct {
> > + __le16 vendor;
> > + __le16 device;
> > + __le32 legacy_id;
> > + } fields;
> > + } id;
> > +
> > + __u64 slot;
> > + __u32 io_addr[ACRN_PCI_NUM_BARS];
>

Hi Greg

> Why is an io address only 32 bits?
>

A PCI device could have six (ACRN_PCI_NUM_BARS) Base Address Registers,
Base Address registers that map into Memory Space can be 32 bits or 64
bits wide. Here doesn't mean this io address only is 32 bits.
Two io_addr could be a 64 bits io_addr which depends on the
Base Address Register Bits 3:0 Encoding.

> And what endian is this?

It's just an array which would be initialzied for index 0 to (ACRN_PCI_NUM_BARS - 1).
So I think what's the endian of it doesn't matter.
>
> > + __u32 io_size[ACRN_PCI_NUM_BARS];
>
> Again, why only 32 bits?

Here also doesn't mean the io_size is 32 bits. a 64 bits PCI BAR (Base Address Register)
could use two io_size element.
>
> > + __u8 args[128];
>
> Where are args defined?

For different kinds of vdevs, it represents differently.
For current usages, it may be:
a) a vdev's name of a virtual PCI device which used to communicate between VMs
b) an index of virtual Uart
c) a structure to represent a virtual Root Port.

thanks.
>
> thanks,
>
> greg k-h

\
 
 \ /
  Last update: 2021-09-23 11:16    [W:0.284 / U:0.104 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site