lkml.org 
[lkml]   [2021]   [Sep]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v2] clocksource: arc_timer: eliminate redefined macro error
From
Date


On 9/23/21 7:08 PM, Randy Dunlap wrote:
> In drivers/clocksource/, 3 drivers use "TIMER_CTRL_IE" with 3 different
> values. Two of them (mps2-timer.c and timer-sp804.c/timer-sp.h) are
> localized and left unmodifed.
>
> One of them uses a shared header file (<soc/arc/timers.h>), which is
> what is causing the "redefined" warnings, so change the macro name in
> that driver only. Also change the TIMER_CTRL_NH macro name.
> Both macro names are prefixed with "ARC_" to reduce the likelihood
> of future name collisions.
>
> In file included from ../drivers/clocksource/timer-sp804.c:24:
> ../drivers/clocksource/timer-sp.h:25: error: "TIMER_CTRL_IE" redefined [-Werror]
> 25 | #define TIMER_CTRL_IE (1 << 5) /* VR */
> ../include/soc/arc/timers.h:20: note: this is the location of the previous definition
> 20 | #define TIMER_CTRL_IE (1 << 0) /* Interrupt when Count reaches limit */
>
> Fixes: b26c2e3823ba ("ARC: breakout timer include code into separate header")
> Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
> Cc: Vineet Gupta <vgupta@kernel.org>
> Cc: linux-snps-arc@lists.infradead.org
> Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
> Cc: Thomas Gleixner <tglx@linutronix.de>
> Cc: Shahab Vahedi <Shahab.Vahedi@synopsys.com>

Acked-by: Vineet Gupta <vgupta@kernel.org>

Thx,
-Vineet

> ---
> v2: prefix both TIMER_CTRL_xx macros with ARC_ (suggested by
> Shahab Vahedi <Shahab.Vahedi@synopsys.com>
>
> drivers/clocksource/arc_timer.c | 6 +++---
> include/soc/arc/timers.h | 4 ++--
> 2 files changed, 5 insertions(+), 5 deletions(-)
>
> --- linux-next-20210917.orig/include/soc/arc/timers.h
> +++ linux-next-20210917/include/soc/arc/timers.h
> @@ -17,8 +17,8 @@
> #define ARC_REG_TIMER1_CNT 0x100 /* timer 1 count */
>
> /* CTRL reg bits */
> -#define TIMER_CTRL_IE (1 << 0) /* Interrupt when Count reaches limit */
> -#define TIMER_CTRL_NH (1 << 1) /* Count only when CPU NOT halted */
> +#define ARC_TIMER_CTRL_IE (1 << 0) /* Interrupt when Count reaches limit */
> +#define ARC_TIMER_CTRL_NH (1 << 1) /* Count only when CPU NOT halted */
>
> #define ARC_TIMERN_MAX 0xFFFFFFFF
>
> --- linux-next-20210917.orig/drivers/clocksource/arc_timer.c
> +++ linux-next-20210917/drivers/clocksource/arc_timer.c
> @@ -225,7 +225,7 @@ static int __init arc_cs_setup_timer1(st
>
> write_aux_reg(ARC_REG_TIMER1_LIMIT, ARC_TIMERN_MAX);
> write_aux_reg(ARC_REG_TIMER1_CNT, 0);
> - write_aux_reg(ARC_REG_TIMER1_CTRL, TIMER_CTRL_NH);
> + write_aux_reg(ARC_REG_TIMER1_CTRL, ARC_TIMER_CTRL_NH);
>
> sched_clock_register(arc_timer1_clock_read, 32, arc_timer_freq);
>
> @@ -245,7 +245,7 @@ static void arc_timer_event_setup(unsign
> write_aux_reg(ARC_REG_TIMER0_LIMIT, cycles);
> write_aux_reg(ARC_REG_TIMER0_CNT, 0); /* start from 0 */
>
> - write_aux_reg(ARC_REG_TIMER0_CTRL, TIMER_CTRL_IE | TIMER_CTRL_NH);
> + write_aux_reg(ARC_REG_TIMER0_CTRL, ARC_TIMER_CTRL_IE | ARC_TIMER_CTRL_NH);
> }
>
>
> @@ -294,7 +294,7 @@ static irqreturn_t timer_irq_handler(int
> * explicitly clears IP bit
> * 2. Re-arm interrupt if periodic by writing to IE bit [0]
> */
> - write_aux_reg(ARC_REG_TIMER0_CTRL, irq_reenable | TIMER_CTRL_NH);
> + write_aux_reg(ARC_REG_TIMER0_CTRL, irq_reenable | ARC_TIMER_CTRL_NH);
>
> evt->event_handler(evt);
>

\
 
 \ /
  Last update: 2021-09-24 04:50    [W:0.075 / U:0.680 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site