lkml.org 
[lkml]   [2021]   [Sep]   [22]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v3 0/7] get_abi.pl: Check for missing symbols at the ABI specs
On Wed, Sep 22, 2021 at 09:36:09AM +0200, Mauro Carvalho Chehab wrote:
> Em Wed, 22 Sep 2021 08:22:33 +0200
> Greg Kroah-Hartman <gregkh@linuxfoundation.org> escreveu:
>
> > On Wed, Sep 22, 2021 at 07:43:42AM +0200, Greg Kroah-Hartman wrote:
> > > On Tue, Sep 21, 2021 at 08:16:33PM +0200, Mauro Carvalho Chehab wrote:
> > > > Em Tue, 21 Sep 2021 18:52:42 +0200
> > > > Greg Kroah-Hartman <gregkh@linuxfoundation.org> escreveu:
> > > >
> > > > > On Sat, Sep 18, 2021 at 11:52:10AM +0200, Mauro Carvalho Chehab wrote:
> > > > > > Hi Greg,
> > > > > >
> > > > > > Add a new feature at get_abi.pl to optionally check for existing symbols
> > > > > > under /sys that won't match a "What:" inside Documentation/ABI.
> > > > > >
> > > > > > Such feature is very useful to detect missing documentation for ABI.
> > > > > >
> > > > > > This series brings a major speedup, plus it fixes a few border cases when
> > > > > > matching regexes that end with a ".*" or \d+.
> > > > > >
> > > > > > patch 1 changes get_abi.pl logic to handle multiple What: lines, in
> > > > > > order to make the script more robust;
> > > > > >
> > > > > > patch 2 adds the basic logic. It runs really quicky (up to 2
> > > > > > seconds), but it doesn't use sysfs softlinks.
> > > > > >
> > > > > > Patch 3 adds support for parsing softlinks. It makes the script a
> > > > > > lot slower, making it take a couple of minutes to process the entire
> > > > > > sysfs files. It could be optimized in the future by using a graph,
> > > > > > but, for now, let's keep it simple.
> > > > > >
> > > > > > Patch 4 adds an optional parameter to allow filtering the results
> > > > > > using a regex given by the user. When this parameter is used
> > > > > > (which should be the normal usecase), it will only try to find softlinks
> > > > > > if the sysfs node matches a regex.
> > > > > >
> > > > > > Patch 5 improves the report by avoiding it to ignore What: that
> > > > > > ends with a wildcard.
> > > > > >
> > > > > > Patch 6 is a minor speedup. On a Dell Precision 5820, after patch 6,
> > > > > > results are:
> > > > > >
> > > > > > $ time ./scripts/get_abi.pl undefined |sort >undefined && cat undefined| perl -ne 'print "$1\n" if (m#.*/(\S+) not found#)'|sort|uniq -c|sort -nr >undefined_symbols; wc -l undefined; wc -l undefined_symbols
> > > > > >
> > > > > > real 2m35.563s
> > > > > > user 2m34.346s
> > > > > > sys 0m1.220s
> > > > > > 7595 undefined
> > > > > > 896 undefined_symbols
> > > > > >
> > > > > > Patch 7 makes a *huge* speedup: it basically switches a linear O(n^3)
> > > > > > search for links by a logic which handle symlinks using BFS. It
> > > > > > also addresses a border case that was making 'msi-irqs/\d+' regex to
> > > > > > be misparsed.
> > > > > >
> > > > > > After patch 7, it is 11 times faster:
> > > > > >
> > > > > > $ time ./scripts/get_abi.pl undefined |sort >undefined && cat undefined| perl -ne 'print "$1\n" if (m#.*/(\S+) not found#)'|sort|uniq -c|sort -nr >undefined_symbols; wc -l undefined; wc -l undefined_symbols
> > > > > >
> > > > > > real 0m14.137s
> > > > > > user 0m12.795s
> > > > > > sys 0m1.348s
> > > > > > 7030 undefined
> > > > > > 794 undefined_symbols
> > > > > >
> > > > > > (the difference on the number of undefined symbols are due to the fix for
> > > > > > it to properly handle 'msi-irqs/\d+' regex)
> > > > > >
> > > > > > -
> > > > > >
> > > > > > While this series is independent from Documentation/ABI changes, it
> > > > > > works best when applied from this tree, which also contain ABI fixes
> > > > > > and a couple of additions of frequent missed symbols on my machine:
> > > > > >
> > > > > > https://git.kernel.org/pub/scm/linux/kernel/git/mchehab/devel.git/log/?h=get_undefined_abi_v3
> > > > >
> > > > > I've taken all of these, but get_abi.pl seems to be stuck in an endless
> > > > > loop or something. I gave up and stopped it after 14 minutes. It had
> > > > > stopped printing out anything after finding all of the pci attributes
> > > > > that are not documented :)
> > > >
> > > > It is probably not an endless loop, just there are too many vars to
> > > > check on your system, which could make it really slow.
> > >
> > > Ah, yes, I ran it overnight and got the following:
> > >
> > > $ time ./scripts/get_abi.pl undefined |sort >undefined && cat undefined| perl -ne 'print "$1\n" if (m#.*/(\S+) not found#)'|sort|uniq -c|sort -nr >undefined_symbols; wc -l undefined; wc -l undefined_symbols
> > >
> > > real 29m39.503s
> > > user 29m37.556s
> > > sys 0m0.851s
> > > 26669 undefined
> > > 765 undefined_symbols
> > >
> > > > The way the search algorithm works is that reduces the number of regex
> > > > expressions that will be checked for a given file entry at sysfs. It
> > > > does that by looking at the devnode name. For instance, when it checks for
> > > > this file:
> > > >
> > > > /sys/bus/pci/drivers/iosf_mbi_pci/bind
> > > >
> > > > The logic will seek only the "What:" expressions that end with "bind".
> > > > Currently, there are just two What expressions for it[1]:
> > > >
> > > > What: /sys/bus/fsl\-mc/drivers/.*/bind
> > > > What: /sys/bus/pci/drivers/.*/bind
> > > >
> > > > It will then run an O(n²) algorithm to seek:
> > > >
> > > > foreach my $a (@names) {
> > > > foreach my $w (split /\xac/, $what) {
> > > > if ($a =~ m#^$w$#) {
> > > > exact = 1;
> > > > last;
> > > > }
> > > > }
> > > > }
> > > >
> > > > Which runs quickly, when there are few regexs to seek. There are,
> > > > however, some What: expressions that end with a wildcard. Those are
> > > > harder to process. Right now, they're all grouped together, which
> > > > makes them slower. Most of the processing time are spent on those.
> > > >
> > > > I'm working right now on some strategy to also speed up the search
> > > > for them. Once I get something better, I'll send a patch series.
> > > >
> > > > --
> > > >
> > > > [1] On a side note, there are currently some problems with the What:
> > > > definitions for bind/unbind, as:
> > > >
> > > > - it doesn't match all PCI devices;
> > > > - it doesn't match ACPI and other buses that also export
> > > > bind/unbind.
> > > >
> > > > >
> > > > > Anything I can do to help debug this?
> > > > >
> > > >
> > > > There are two parameters that can help to identify the issue:
> > > >
> > > > a) You can add a "--show-hints" parameter. This turns on some
> > > > prints that may help to identify what the script is doing.
> > > > It is not really a debug option, but it helps to identify
> > > > when some regexes are failing.
> > > >
> > > > b) You can limit the What expressions that will be parsed with:
> > > > --search-string <something>
> > > >
> > > > You can combine both. For instance, if you want to make it
> > > > a lot more verbose, you could run it as:
> > > >
> > > > ./scripts/get_abi.pl undefined --search-string /sys --show-hints
> > >
> > > Let me run this and time stamp it to see where it is getting hung up on.
> > > Give it another 30 minutes :)
> >
> > Hm, that didn't make too much sense as to what it was stalled on. I've
> > attached the compressed file if you are curious.
>
> Hmm...
>
> [07:52:44] --> /sys/devices/pci0000:40/0000:40:01.3/0000:4a:00.1/iommu/amd-iommu/cap
> [08:07:52] --> /sys/devices/pci0000:40/0000:40:01.1/0000:41:00.0/0000:42:05.0/iommu/amd-iommu/cap
>
> It sounds it took quite a while handling iommu cap, which sounds weird, as
> it should be looking just 3 What expressions:
>
> [07:43:06] What: /sys/class/iommu/.*/amd\-iommu/cap
> [07:43:06] What: /sys/class/iommu/.*/intel\-iommu/cap
> [07:43:06] What: /sys/devices/pci.*.*.*.*\:.*.*/0000\:.*.*\:.*.*..*/dma/dma.*chan.*/quickdata/cap
>
> Maybe there was a memory starvation while running the script, causing
> swaps. Still, it is weird that it would happen there, as the hashes
> and arrays used at the script are all allocated before it starts the
> search logic. Here, the allocation part takes ~2 seconds.

No memory starvation here, this thing is a beast:
$ free -h
total used free shared buff/cache available
Mem: 251Gi 36Gi 13Gi 402Mi 202Gi 212Gi
Swap: 4.0Gi 182Mi 3.8Gi

$ nproc
64


> At least on my Dell Precision 5820 (12 cpu threads), the amount of memory it
> uses is not huge:
>
> $ /usr/bin/time -v ./scripts/get_abi.pl undefined >/dev/null
> Command being timed: "./scripts/get_abi.pl undefined"
> User time (seconds): 12.68
> System time (seconds): 1.29
> Percent of CPU this job got: 99%
> Elapsed (wall clock) time (h:mm:ss or m:ss): 0:13.98
> Average shared text size (kbytes): 0
> Average unshared data size (kbytes): 0
> Average stack size (kbytes): 0
> Average total size (kbytes): 0
> Maximum resident set size (kbytes): 212608
> Average resident set size (kbytes): 0
> Major (requiring I/O) page faults: 0
> Minor (reclaiming a frame) page faults: 52003
> Voluntary context switches: 1
> Involuntary context switches: 56
> Swaps: 0
> File system inputs: 0
> File system outputs: 0
> Socket messages sent: 0
> Socket messages received: 0
> Signals delivered: 0
> Page size (bytes): 4096
> Exit status: 0
>
> Unfortunately, I don't have any amd-based machine here, but I'll
> try to run it later on a big arm server and see how it behaves.

I'll run that and get back to you in 30 minutes :)

thanks,

greg k-h

\
 
 \ /
  Last update: 2021-09-22 10:12    [W:1.276 / U:0.092 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site