lkml.org 
[lkml]   [2021]   [Sep]   [22]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH] arm64: dts: qcom: ipq8074: add SMEM support
On Wed 22 Sep 15:23 CDT 2021, Robert Marko wrote:

> On Tue, 21 Sept 2021 at 08:24, Kathiravan T <kathirav@codeaurora.org> wrote:
> >
> > On 2021-09-20 14:55, Robert Marko wrote:
> > > On Mon, 20 Sept 2021 at 04:52, Bjorn Andersson
> > > <bjorn.andersson@linaro.org> wrote:
> > >>
> > >> On Thu 02 Sep 16:47 CDT 2021, Robert Marko wrote:
> > >>
> > >> > IPQ8074 uses SMEM like other modern QCA SoC-s, so since its already
> > >> > supported by the kernel add the required DT nodes.
> > >> >
> > >> > Signed-off-by: Robert Marko <robimarko@gmail.com>
> > >>
> > >> Thanks for your patch Robert.
> > >>
> > >> > ---
> > >> > arch/arm64/boot/dts/qcom/ipq8074.dtsi | 28 +++++++++++++++++++++++++++
> > >> > 1 file changed, 28 insertions(+)
> > >> >
> > >> > diff --git a/arch/arm64/boot/dts/qcom/ipq8074.dtsi b/arch/arm64/boot/dts/qcom/ipq8074.dtsi
> > >> > index a620ac0d0b19..83e9243046aa 100644
> > >> > --- a/arch/arm64/boot/dts/qcom/ipq8074.dtsi
> > >> > +++ b/arch/arm64/boot/dts/qcom/ipq8074.dtsi
> > >> > @@ -82,6 +82,29 @@ scm {
> > >> > };
> > >> > };
> > >> >
> > >> > + reserved-memory {
> > >> > + #address-cells = <2>;
> > >> > + #size-cells = <2>;
> > >> > + ranges;
> > >> > +
> > >> > + smem_region: memory@4ab00000 {
> > >> > + no-map;
> > >> > + reg = <0x0 0x4ab00000 0x0 0x00100000>;
> > >> > + };
> > >> > + };
> > >> > +
> > >> > + tcsr_mutex: hwlock {
> > >> > + compatible = "qcom,tcsr-mutex";
> > >> > + syscon = <&tcsr_mutex_regs 0 0x80>;
> > >>
> > >> Since it's not okay to have a lone "syscon" and I didn't think it was
> > >> worth coming up with a binding for the TCSR mutex "syscon" I rewrote
> > >> the
> > >> binding a while back. As such qcom,tcsr-mutex should now live in /soc
> > >> directly.
> > >>
> > >> So can you please respin accordingly?
> > >
> > > Sure, can you just confirm that the:
> > > reg = <0x01905000 0x8000>;
> > >
> > > Is the whole TCSR range as I don't have docs?
> >
> > Robert,
> >
> > TCSR_MUTEX block starts from 0x01905000 and has size 0x20000 (128KB)
>
> Thanks, Kathiravan,
> TSCR mutex with MMIO reg under it works, but there is some weird probe
> ordering issue.
>
> For whatever reason, SMEM will get probed only after MTD does and this
> will cause issues
> if SMEM parser is used as it will return -EPROBE_DEFER but the MTD
> core does not really
> handle it correctly and causes the device to reboot after failed parsing.
>
> Now, I have no idea why does this variant which uses MMIO regmap probe
> so much later?
>

Mani, do you have any input related to the probe deferral of the SMEM
partition parser, because SMEM not yet probed?

Thanks,
Bjorn

\
 
 \ /
  Last update: 2021-09-23 00:18    [W:0.073 / U:0.244 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site