lkml.org 
[lkml]   [2021]   [Sep]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [PATCH v3 4/6] riscv: dts: microchip: drop duplicated MMC/SDHC node
Date
On 21/09/2021 12:57, Krzysztof Kozlowski wrote:
> EXTERNAL EMAIL: Do not click links or open attachments unless you know the content is safe
>
> On 21/09/2021 12:40, Conor.Dooley@microchip.com wrote:
>> On 20/09/2021 16:08, Krzysztof Kozlowski wrote:
>>> EXTERNAL EMAIL: Do not click links or open attachments unless you know the content is safe
>>>
>>> Devicetree source is a description of hardware and hardware has only one
>>> block @20008000 which can be configured either as eMMC or SDHC. Having
>>> two node for different modes is an obscure, unusual and confusing way to
>>> configure it. Instead the board file is supposed to customize the block
>>> to its needs, e.g. to SDHC mode.
>>>
>>> This fixes dtbs_check warning:
>>> arch/riscv/boot/dts/microchip/microchip-mpfs-icicle-kit.dt.yaml: sdhc@20008000: $nodename:0: 'sdhc@20008000' does not match '^mmc(@.*)?$'
>>>
>>> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
>>>
>>> ---
>>>
>>> Changes since v1:
>>> 1. Move also bus-width, suggested by Geert.
>>> ---
>>> .../microchip/microchip-mpfs-icicle-kit.dts | 11 +++++++-
>>> .../boot/dts/microchip/microchip-mpfs.dtsi | 28 +------------------
>>> 2 files changed, 11 insertions(+), 28 deletions(-)
>>>
>>> diff --git a/arch/riscv/boot/dts/microchip/microchip-mpfs-icicle-kit.dts b/arch/riscv/boot/dts/microchip/microchip-mpfs-icicle-kit.dts
>>> index 07f1f3cab686..fc1e5869df1b 100644
>>> --- a/arch/riscv/boot/dts/microchip/microchip-mpfs-icicle-kit.dts
>>> +++ b/arch/riscv/boot/dts/microchip/microchip-mpfs-icicle-kit.dts
>>> @@ -51,8 +51,17 @@ &serial3 {
>>> status = "okay";
>>> };
>>>
>>> -&sdcard {
>>> +&mmc {
>>> status = "okay";
>>> +
>>> + bus-width = <4>;
>>> + disable-wp;
>>> + cap-sd-highspeed;
>>> + card-detect-delay = <200>;
>>> + sd-uhs-sdr12;
>>> + sd-uhs-sdr25;
>>> + sd-uhs-sdr50;
>>> + sd-uhs-sdr104;
>>> };
>>>
>>> &emac0 {
>>> diff --git a/arch/riscv/boot/dts/microchip/microchip-mpfs.dtsi b/arch/riscv/boot/dts/microchip/microchip-mpfs.dtsi
>>> index 5084b93188f0..83bc14860960 100644
>>> --- a/arch/riscv/boot/dts/microchip/microchip-mpfs.dtsi
>>> +++ b/arch/riscv/boot/dts/microchip/microchip-mpfs.dtsi
>>> @@ -262,39 +262,13 @@ serial3: serial@20104000 {
>>> status = "disabled";
>>> };
>>>
>>> - emmc: mmc@20008000 {
>>> - compatible = "cdns,sd4hc";
>>> - reg = <0x0 0x20008000 0x0 0x1000>;
>>> - interrupt-parent = <&plic>;
>>> - interrupts = <88 89>;
>>> - pinctrl-names = "default";
>>> - clocks = <&clkcfg 6>;
>>> - bus-width = <4>;
>>> - cap-mmc-highspeed;
>>> - mmc-ddr-3_3v;
>>> - max-frequency = <200000000>;
>>> - non-removable;
>>> - no-sd;
>>> - no-sdio;
>>> - voltage-ranges = <3300 3300>;
>>> - status = "disabled";
>>> - };
>>> -
>>> - sdcard: sdhc@20008000 {
>>> + mmc: mmc@20008000 {
>>> compatible = "cdns,sd4hc";
>>> reg = <0x0 0x20008000 0x0 0x1000>;
>>> interrupt-parent = <&plic>;
>>> interrupts = <88>;
>>> pinctrl-names = "default";
>>> clocks = <&clkcfg 6>;
>>> - bus-width = <4>;
>>> - disable-wp;
>>> - cap-sd-highspeed;
>>> - card-detect-delay = <200>;
>>> - sd-uhs-sdr12;
>>> - sd-uhs-sdr25;
>>> - sd-uhs-sdr50;
>>> - sd-uhs-sdr104;
>>> max-frequency = <200000000>;
>>> status = "disabled";
>>> };
>>> --
>>> 2.30.2
>>>
>> Hi Krzysztof,
>> Seems I missed most of this series other than the new vendor name in the V1.
> Unfortunately your name does not appear as maintainer for these files
> and get_maintainers.pl brings it only sometimes as a --git fallback.
> Also few addresses from that --git fallback are non working, so I am not
> always Cc-ing them. Sorry for that, I'll try to Cc you on next Microchip
> RISC-V submissions, however you should probably add a proper platform
> maintainer entry (similarly to ARM/ARM64 subarchitectures).
Yeah, I just usually read every message and happened to miss part of the
series.
Seems like none of my coworkers are listed against the device tree so
I'll get someone added.
>> We have been redoing the device tree for the mpfs/icicle kit partly dye
>> to some changes we made to the design. Previously SD and eMMC were
>> different FPGA designs but now both are in the same design and managed
>> by the bootloader, depending on where it finds the image to boot from.
>> Since then we've just been using the following single entry in the .dtsi:
>>
>> mmc: mmc@20008000 { /* Common node entry for emmc/sd */
>> compatible = "cdns,sd4hc";
>> reg = <0x0 0x20008000 0x0 0x1000>;
>> clocks = <&clkcfg CLK_MMC>;
>> interrupt-parent = <&plic>;
>> interrupts = <PLIC_INT_MMC_MAIN PLIC_INT_MMC_WAKEUP>;
> I'll switch to 2 interrupts.
>
>> bus-width = <4>;
>> cap-mmc-highspeed;
>> cap-sd-highspeed;
>> no-1-8-v;
>> disable-wp;
>> max-frequency = <200000000>;
>> status = "disabled";
> I understand you prefer then the mmc node to be active? Before the DT
> had SDHC one enable, so my patch did not introduce changes (except
> mentioned interrupt).
>
> I can change it to mmc above with your explanation.
It's named mmc but it works for both SD card and eMMC, just depends on
whats selected during boot. I'm not sure what is the appropriate thing
to actually name the node in this case, maybe you know better than I do?
> patch did not introduce changes
Yeah, I just figured that if changes are being made then its worth
switching to the single entry now rather than waiting and doing it in a
few weeks time.
>
>
> Best regards,
> Krzysztof


\
 
 \ /
  Last update: 2021-09-21 16:15    [W:0.070 / U:0.444 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site