lkml.org 
[lkml]   [2021]   [Sep]   [20]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [PATCH] xen-pciback: allow compiling on other archs than x86
Date
On 20.09.21 07:23, Oleksandr Andrushchenko wrote:
> Hello, Stefano!
>
> On 18.09.21 00:45, Stefano Stabellini wrote:
>> Hi Oleksandr,
>>
>> Why do you want to enable pciback on ARM? Is it only to "disable" a PCI
>> device in Dom0 so that it can be safely assigned to a DomU?
> Not only that
>>
>> I am asking because actually I don't think we want to enable the PV PCI
>> backend feature of pciback on ARM, right? That would clash with the PCI
>> assignment work you have been doing in Xen. They couldn't both work at
>> the same time.
> Correct, it is not used
>>
>> If we only need pciback to "park" a device in Dom0, wouldn't it be
>> possible and better to use pci-stub instead?
>
> Not only that, so pci-stub is not enough
>
> The functionality which is implemented by the pciback and the toolstack
> and which is relevant/missing/needed for ARM:
>
> 1. pciback is used as a database for assignable PCI devices, e.g. xl
>    pci-assignable-{add|remove|list} manipulates that list. So, whenever the
>    toolstack needs to know which PCI devices can be passed through it reads
>    that from the relevant sysfs entries of the pciback.
>
> 2. pciback is used to hold the unbound PCI devices, e.g. when passing through
>    a PCI device it needs to be unbound from the relevant device driver and bound
>    to pciback (strictly speaking it is not required that the device is bound to
>    pciback, but pciback is again used as a database of the passed through PCI
>    devices, so we can re-bind the devices back to their original drivers when
>    guest domain shuts down)
>
> 3. Device reset
>
> We have previously discussed on xen-devel ML possible solutions to that as from the
> above we see that pciback functionality is going to be only partially used on Arm.
>
> Please see [1] and [2]:
>
> 1. It is not acceptable to manage the assignable list in Xen itself
>
> 2. pciback can be split into two parts: PCI assignable/bind/reset handling and
> the rest like vPCI etc.
>
> 3. pcifront is not used on Arm

It is neither in x86 PVH/HVM guests.

> So, limited use of the pciback is one of the bricks used to enable PCI passthrough
> on Arm. It was enough to just re-structure the driver and have it run on Arm to achieve
> all the goals above.
>
> If we still think it is desirable to break the pciback driver into "common" and "pcifront specific"
> parts then it can be done, yet the patch is going to be the very first brick in that building.

Doing this split should be done, as the pcifront specific part could be
omitted on x86, too, in case no PV guests using PCI passthrough have to
be supported.

> So, I think this patch is still going to be needed besides which direction we take.

Some kind of this patch, yes. It might look different in case the split
is done first.

I don't mind doing it in either sequence.


Juergen
[unhandled content-type:application/pgp-keys][unhandled content-type:application/pgp-signature]
\
 
 \ /
  Last update: 2021-09-20 13:31    [W:0.121 / U:1.248 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site