lkml.org 
[lkml]   [2021]   [Sep]   [20]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH net-next 2/5] net: phy: broadcom: Wire suspend/resume for BCM50610 and BCM50610M
Date
These two Ethernet PHYs support IDDQ-SR therefore wire-up the suspend
and resume callbacks to point to bcm54xx_suspend() and bcm54xx_resume().

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
---
drivers/net/phy/broadcom.c | 4 ++++
1 file changed, 4 insertions(+)

diff --git a/drivers/net/phy/broadcom.c b/drivers/net/phy/broadcom.c
index f5868a0dee4b..952341e0baec 100644
--- a/drivers/net/phy/broadcom.c
+++ b/drivers/net/phy/broadcom.c
@@ -948,6 +948,8 @@ static struct phy_driver broadcom_drivers[] = {
.config_intr = bcm_phy_config_intr,
.handle_interrupt = bcm_phy_handle_interrupt,
.link_change_notify = bcm54xx_link_change_notify,
+ .suspend = bcm54xx_suspend,
+ .resume = bcm54xx_resume,
}, {
.phy_id = PHY_ID_BCM50610M,
.phy_id_mask = 0xfffffff0,
@@ -961,6 +963,8 @@ static struct phy_driver broadcom_drivers[] = {
.config_intr = bcm_phy_config_intr,
.handle_interrupt = bcm_phy_handle_interrupt,
.link_change_notify = bcm54xx_link_change_notify,
+ .suspend = bcm54xx_suspend,
+ .resume = bcm54xx_resume,
}, {
.phy_id = PHY_ID_BCM57780,
.phy_id_mask = 0xfffffff0,
--
2.25.1
\
 
 \ /
  Last update: 2021-09-21 04:05    [W:0.055 / U:0.112 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site