lkml.org 
[lkml]   [2021]   [Sep]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v3 net 1/2] net: mscc: ocelot: remove buggy and useless write to ANA_PFC_PFC_CFG
Date
A useless write to ANA_PFC_PFC_CFG was left in while refactoring ocelot to
phylink. Since priority flow control is disabled, writing the speed has no
effect.

Further, it was using ethtool.h SPEED_ instead of OCELOT_SPEED_ macros,
which are incorrectly offset for GENMASK.

Lastly, for priority flow control to properly function, some scenarios
would rely on the rate adaptation from the PCS while the MAC speed would
be fixed. So it isn't used, and even if it was, neither "speed" nor
"mac_speed" are necessarily the correct values to be used.

Fixes: e6e12df625f2 ("net: mscc: ocelot: convert to phylink")
Signed-off-by: Colin Foster <colin.foster@in-advantage.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
---
drivers/net/ethernet/mscc/ocelot.c | 4 ----
1 file changed, 4 deletions(-)

diff --git a/drivers/net/ethernet/mscc/ocelot.c b/drivers/net/ethernet/mscc/ocelot.c
index c581b955efb3..08be0440af28 100644
--- a/drivers/net/ethernet/mscc/ocelot.c
+++ b/drivers/net/ethernet/mscc/ocelot.c
@@ -569,10 +569,6 @@ void ocelot_phylink_mac_link_up(struct ocelot *ocelot, int port,
ocelot_port_writel(ocelot_port, DEV_CLOCK_CFG_LINK_SPEED(speed),
DEV_CLOCK_CFG);

- /* No PFC */
- ocelot_write_gix(ocelot, ANA_PFC_PFC_CFG_FC_LINK_SPEED(speed),
- ANA_PFC_PFC_CFG, port);
-
/* Core: Enable port for frame transfer */
ocelot_fields_write(ocelot, port,
QSYS_SWITCH_PORT_MODE_PORT_ENA, 1);
--
2.25.1
\
 
 \ /
  Last update: 2021-09-17 17:42    [W:0.060 / U:0.300 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site