lkml.org 
[lkml]   [2021]   [Sep]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v5 1/2] spi: cadence: add dt-bindings documentation for Cadence XSPI controller
Date
Add DT binding for Cadence's XSPI controller driver.

Signed-off-by: Konrad Kociolek <konrad@cadence.com>
Signed-off-by: Jayshri Pawar <jpawar@cadence.com>
Signed-off-by: Parshuram Thombare <pthombar@cadence.com>
---
.../devicetree/bindings/spi/cdns,xspi.yaml | 77 ++++++++++++++++++++++
1 file changed, 77 insertions(+)
create mode 100644 Documentation/devicetree/bindings/spi/cdns,xspi.yaml

diff --git a/Documentation/devicetree/bindings/spi/cdns,xspi.yaml b/Documentation/devicetree/bindings/spi/cdns,xspi.yaml
new file mode 100644
index 0000000..b8bb8a3
--- /dev/null
+++ b/Documentation/devicetree/bindings/spi/cdns,xspi.yaml
@@ -0,0 +1,77 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright 2020-21 Cadence
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/spi/cdns,xspi.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Cadence XSPI Controller
+
+maintainers:
+ - Parshuram Thombare <pthombar@cadence.com>
+
+description: |
+ The XSPI controller allows SPI protocol communication in
+ single, dual, quad or octal wire transmission modes for
+ read/write access to slaves such as SPI-NOR flash.
+
+allOf:
+ - $ref: "spi-controller.yaml#"
+
+properties:
+ compatible:
+ const: cdns,xspi-nor
+
+ reg:
+ items:
+ - description: address and length of the controller register set
+ - description: address and length of the Slave DMA data port
+ - description: address and length of the auxiliary registers
+
+ reg-names:
+ items:
+ - const: io
+ - const: sdma
+ - const: aux
+
+ interrupts:
+ maxItems: 1
+
+required:
+ - compatible
+ - reg
+ - interrupts
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/irq.h>
+ bus {
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ xspi: spi@a0010000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "cdns,xspi-nor";
+ reg = <0x0 0xa0010000 0x0 0x1040>,
+ <0x0 0xb0000000 0x0 0x1000>,
+ <0x0 0xa0020000 0x0 0x100>;
+ reg-names = "io", "sdma", "aux";
+ interrupts = <0 90 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-parent = <&gic>;
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ spi-max-frequency = <75000000>;
+ reg = <0>;
+ };
+
+ flash@1 {
+ compatible = "jedec,spi-nor";
+ spi-max-frequency = <75000000>;
+ reg = <1>;
+ };
+ };
+ };
--
2.7.4
\
 
 \ /
  Last update: 2021-09-17 16:30    [W:0.367 / U:0.184 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site