Messages in this thread Patch in this message | | | From | Wenbin Mei <> | Subject | [PATCH v4 1/3] dt-bindings: mmc: mtk-sd: add hs400 dly3 setting | Date | Fri, 17 Sep 2021 20:38:49 +0800 |
| |
Add hs400 dly3 setting for mtk-sd yaml
Signed-off-by: Wenbin Mei <wenbin.mei@mediatek.com> Acked-by: Rob Herring <robh@kernel.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> --- Documentation/devicetree/bindings/mmc/mtk-sd.yaml | 12 ++++++++++++ 1 file changed, 12 insertions(+)
diff --git a/Documentation/devicetree/bindings/mmc/mtk-sd.yaml b/Documentation/devicetree/bindings/mmc/mtk-sd.yaml index e866e985549e..82768a807294 100644 --- a/Documentation/devicetree/bindings/mmc/mtk-sd.yaml +++ b/Documentation/devicetree/bindings/mmc/mtk-sd.yaml @@ -119,6 +119,18 @@ properties: If present, HS400 command responses are sampled on rising edges. If not present, HS400 command responses are sampled on falling edges. + mediatek,hs400-ds-dly3: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + Gear of the third delay line for DS for input data latch in data + pad macro, there are 32 stages from 0 to 31. + For different corner IC, the time is different about one step, it is + about 100ps. + The value is confirmed by doing scan and calibration to find a best + value with corner IC and it is valid only for HS400 mode. + minimum: 0 + maximum: 31 + mediatek,latch-ck: $ref: /schemas/types.yaml#/definitions/uint32 description: -- 2.25.1
| |