lkml.org 
[lkml]   [2021]   [Sep]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 2/2] gpio: tegra186: Support multiple interrupts per bank
Date
From: Thierry Reding <treding@nvidia.com>

Tegra194 and later support more than a single interrupt per bank. This
is primarily useful for virtualization but can also be helpful for more
fine-grained CPU affinity control. To keep things simple for now, route
all pins to the first interrupt.

For backwards-compatibility, support old device trees that specify only
one interrupt per bank by counting the interrupts at probe time.

Signed-off-by: Thierry Reding <treding@nvidia.com>
---
drivers/gpio/gpio-tegra186.c | 48 ++++++++++++++++++++++++++++++------
1 file changed, 41 insertions(+), 7 deletions(-)

diff --git a/drivers/gpio/gpio-tegra186.c b/drivers/gpio/gpio-tegra186.c
index 1bc4152e0275..c026e7141e4e 100644
--- a/drivers/gpio/gpio-tegra186.c
+++ b/drivers/gpio/gpio-tegra186.c
@@ -69,6 +69,8 @@ struct tegra_gpio_soc {
const char *name;
unsigned int instance;

+ unsigned int num_irqs_per_bank;
+
const struct tegra186_pin_range *pin_ranges;
unsigned int num_pin_ranges;
const char *pinmux;
@@ -452,7 +454,7 @@ static void tegra186_gpio_irq(struct irq_desc *desc)
struct irq_domain *domain = gpio->gpio.irq.domain;
struct irq_chip *chip = irq_desc_get_chip(desc);
unsigned int parent = irq_desc_get_irq(desc);
- unsigned int i, offset = 0;
+ unsigned int i, j, offset = 0;

chained_irq_enter(chip, desc);

@@ -465,7 +467,12 @@ static void tegra186_gpio_irq(struct irq_desc *desc)
base = gpio->base + port->bank * 0x1000 + port->port * 0x200;

/* skip ports that are not associated with this bank */
- if (parent != gpio->irq[port->bank])
+ for (j = 0; j < gpio->num_irqs_per_bank; j++) {
+ if (parent == gpio->irq[port->bank * gpio->num_irqs_per_bank + j])
+ break;
+ }
+
+ if (j == gpio->num_irqs_per_bank)
goto skip;

value = readl(base + TEGRA186_GPIO_INTERRUPT_STATUS(1));
@@ -567,6 +574,7 @@ static const struct of_device_id tegra186_pmc_of_match[] = {

static void tegra186_gpio_init_route_mapping(struct tegra_gpio *gpio)
{
+ struct device *dev = gpio->gpio.parent;
unsigned int i, j;
u32 value;

@@ -585,12 +593,30 @@ static void tegra186_gpio_init_route_mapping(struct tegra_gpio *gpio)
*/
if ((value & TEGRA186_GPIO_CTL_SCR_SEC_REN) == 0 &&
(value & TEGRA186_GPIO_CTL_SCR_SEC_WEN) == 0) {
- for (j = 0; j < 8; j++) {
+ /*
+ * On Tegra194 and later, each pin can be routed to one or more
+ * interrupts.
+ */
+ for (j = 0; j < gpio->num_irqs_per_bank; j++) {
+ dev_dbg(dev, "programming default interrupt routing for port %s\n",
+ port->name);
+
offset = TEGRA186_GPIO_INT_ROUTE_MAPPING(p, j);

- value = readl(base + offset);
- value = BIT(port->pins) - 1;
- writel(value, base + offset);
+ /*
+ * By default we only want to route GPIO pins to IRQ 0. This works
+ * only under the assumption that we're running as the host kernel
+ * and hence all GPIO pins are owned by Linux.
+ *
+ * For cases where Linux is the guest OS, the hypervisor will have
+ * to configure the interrupt routing and pass only the valid
+ * interrupts via device tree.
+ */
+ if (j == 0) {
+ value = readl(base + offset);
+ value = BIT(port->pins) - 1;
+ writel(value, base + offset);
+ }
}
}
}
@@ -610,6 +636,9 @@ static unsigned int tegra186_gpio_irqs_per_bank(struct tegra_gpio *gpio)

gpio->num_irqs_per_bank = gpio->num_irq / gpio->num_banks;

+ if (gpio->num_irqs_per_bank > gpio->soc->num_irqs_per_bank)
+ goto error;
+
return 0;

error:
@@ -766,7 +795,8 @@ static int tegra186_gpio_probe(struct platform_device *pdev)
irq->parents = gpio->irq;
}

- tegra186_gpio_init_route_mapping(gpio);
+ if (gpio->soc->num_irqs_per_bank > 1)
+ tegra186_gpio_init_route_mapping(gpio);

np = of_find_matching_node(NULL, tegra186_pmc_of_match);
if (np) {
@@ -833,6 +863,7 @@ static const struct tegra_gpio_soc tegra186_main_soc = {
.ports = tegra186_main_ports,
.name = "tegra186-gpio",
.instance = 0,
+ .num_irqs_per_bank = 1,
};

#define TEGRA186_AON_GPIO_PORT(_name, _bank, _port, _pins) \
@@ -859,6 +890,7 @@ static const struct tegra_gpio_soc tegra186_aon_soc = {
.ports = tegra186_aon_ports,
.name = "tegra186-gpio-aon",
.instance = 1,
+ .num_irqs_per_bank = 1,
};

#define TEGRA194_MAIN_GPIO_PORT(_name, _bank, _port, _pins) \
@@ -910,6 +942,7 @@ static const struct tegra_gpio_soc tegra194_main_soc = {
.ports = tegra194_main_ports,
.name = "tegra194-gpio",
.instance = 0,
+ .num_irqs_per_bank = 8,
.num_pin_ranges = ARRAY_SIZE(tegra194_main_pin_ranges),
.pin_ranges = tegra194_main_pin_ranges,
.pinmux = "nvidia,tegra194-pinmux",
@@ -936,6 +969,7 @@ static const struct tegra_gpio_soc tegra194_aon_soc = {
.ports = tegra194_aon_ports,
.name = "tegra194-gpio-aon",
.instance = 1,
+ .num_irqs_per_bank = 8,
};

static const struct of_device_id tegra186_gpio_of_match[] = {
--
2.33.0
\
 
 \ /
  Last update: 2021-09-17 12:54    [W:0.066 / U:0.372 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site