lkml.org 
[lkml]   [2021]   [Sep]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    /
    From
    Subject[PATCH v7 00/13] Use qmp_send to update co-processor load state
    Date
    The power domains exposed by the AOSS QMP driver control the load state
    resources linked to modem, adsp, cdsp remoteprocs. These are used to
    notify the Always on Subsystem (AOSS) that a particular co-processor is
    up/down. AOSS uses this information to wait for the co-processors to
    suspend before starting its sleep sequence. These co-processors enter
    low-power modes independent to that of the application processor and
    the load state resources linked to them are expected to remain unaltered
    across system suspend/resume cycles. To achieve this behavior let's stop
    modeling them as power-domains and replace them with generic qmp_send
    interface instead.

    https://lore.kernel.org/lkml/20200913034603.GV3715@yoga/
    Previous discussion on dropping power-domain support from AOSS QMP driver

    Depends on:
    qmp_send: https://patchwork.kernel.org/project/linux-arm-msm/cover/1630420228-31075-1-git-send-email-deesin@codeaurora.org/

    V7:
    * Set "qcom,qmp" property to false for unsupported devices (patch 2). [Rob]
    * Let's not miss adding qcom,qmp to ADSP/CDSP on SDM845 SoC.

    V6:
    * Updated commit message to explain binding breakage (patch 2). [Stephen]

    V5:
    * Fixup power-domain count (patch 2). [Matthias]
    * Add WARN_ON on truncation, remove redundant initialization
    code, use dev_err_probe (patch 4). [Stephen]
    * Use devm_kstrdup, handle kstrdup failure due to
    no memory and set qmp to NULL when not available
    (patch 4). [Bjorn]

    V4:
    * Rebase patch 1 due to the aoss-qmp yaml conversion (Dropping Rb).
    * Commit message change and sc8180x co-processor addition
    to patch 2. [Rob/Bjorn]
    * Drop unused pdev and kfree the load state string in q6v5_deinit
    /probe path for patch 4. [Matthias]
    * Replaced "binding" with "property" across the series. [Matthias]
    * Commit message change and drop incorrect cleanup on cooling
    device probe failures. [Matthias]

    V3:
    * Misc. documentation fixes [patch 2]:
    - Reduce power-domain maxItems due to load_state pd removal
    - Combine compatibles where possible with the load_state pd removal
    - Fixup the qcom,qmp ref to phandle type

    V2:
    * load_state is currently broken on mainline so be safely dropped
    without side-effects.
    * Rebased on top of qmp_send v3 series.
    * Dropped R-b from Stephen and Rob on patch 3 due to the yaml
    conversion.
    * New patch [12] to drop unused aoss-qmp header.
    * Commit message update [patch 1] [Rob]
    * Reorder the series [Stephen]

    Sibi Sankar (13):
    dt-bindings: soc: qcom: aoss: Drop the load state power-domain
    dt-bindings: remoteproc: qcom: pas: Add QMP property
    dt-bindings: remoteproc: qcom: Add QMP property
    remoteproc: qcom: q6v5: Use qmp_send to update co-processor load state
    arm64: dts: qcom: sc7180: Use QMP property to control load state
    arm64: dts: qcom: sc7280: Use QMP property to control load state
    arm64: dts: qcom: sdm845: Use QMP property to control load state
    arm64: dts: qcom: sm8150: Use QMP property to control load state
    arm64: dts: qcom: sm8250: Use QMP property to control load state
    arm64: dts: qcom: sm8350: Use QMP property to control load state
    soc: qcom: aoss: Drop power domain support
    dt-bindings: msm/dp: Remove aoss-qmp header
    dt-bindings: soc: qcom: aoss: Delete unused power-domain definitions

    .../bindings/display/msm/dp-controller.yaml | 1 -
    .../devicetree/bindings/remoteproc/qcom,adsp.yaml | 54 +++++-----
    .../devicetree/bindings/remoteproc/qcom,q6v5.txt | 7 +-
    .../bindings/soc/qcom/qcom,aoss-qmp.yaml | 11 +-
    arch/arm64/boot/dts/qcom/sc7180.dtsi | 9 +-
    arch/arm64/boot/dts/qcom/sc7280.dtsi | 2 -
    arch/arm64/boot/dts/qcom/sdm845.dtsi | 12 ++-
    arch/arm64/boot/dts/qcom/sm8150.dtsi | 28 ++---
    arch/arm64/boot/dts/qcom/sm8250.dtsi | 22 ++--
    arch/arm64/boot/dts/qcom/sm8350.dtsi | 30 +++---
    drivers/remoteproc/qcom_q6v5.c | 57 ++++++++++-
    drivers/remoteproc/qcom_q6v5.h | 7 +-
    drivers/remoteproc/qcom_q6v5_adsp.c | 7 +-
    drivers/remoteproc/qcom_q6v5_mss.c | 44 ++------
    drivers/remoteproc/qcom_q6v5_pas.c | 113 ++++++++-------------
    drivers/remoteproc/qcom_q6v5_wcss.c | 4 +-
    drivers/soc/qcom/qcom_aoss.c | 107 -------------------
    include/dt-bindings/power/qcom-aoss-qmp.h | 14 ---
    18 files changed, 206 insertions(+), 323 deletions(-)
    delete mode 100644 include/dt-bindings/power/qcom-aoss-qmp.h

    --
    The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
    a Linux Foundation Collaborative Project

    \
     
     \ /
      Last update: 2021-09-16 16:01    [W:2.234 / U:0.044 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site