lkml.org 
[lkml]   [2021]   [Sep]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH 0/4] add the imx8 pcie phy driver support
Date
refer to the discussion [1] when try to enable i.MX8MM PCIe support,
one standalone PCIe PHY driver should be seperated from i.MX PCIe
driver when enable i.MX8MM PCIe support.

This patch-set adds the standalone PCIe PHY driver suport, and as a
preparatory to add the i.MX8MM PCIe support later.

The PCIe works on i.MX8MM EVK board based the the blkctrl power driver
[2] and this PHY driver patch-set.

[1] https://patchwork.ozlabs.org/project/linux-pci/patch/20210510141509.929120-3-l.stach@pengutronix.de/
[2] https://patchwork.kernel.org/project/linux-arm-kernel/cover/20210910202640.980366-1-l.stach@pengutronix.de/

[PATCH 1/4] dt-bindings: phy: phy-imx8-pcie: Add binding for the pad
[PATCH 2/4] dt-bindings: phy: add imx8 pcie phy driver support
[PATCH 3/4] arm64: dts: imx8mm: add the pcie phy support
[PATCH 4/4] phy: freescale: pcie: initialize the imx8 pcie standalone

Documentation/devicetree/bindings/phy/fsl,imx8-pcie-phy.yaml | 66 ++++++++++++++++++++++++++++++++
arch/arm64/boot/dts/freescale/imx8mm-evk.dtsi | 4 ++
arch/arm64/boot/dts/freescale/imx8mm.dtsi | 12 ++++++
drivers/phy/freescale/Kconfig | 9 +++++
drivers/phy/freescale/Makefile | 1 +
drivers/phy/freescale/phy-fsl-imx8-pcie.c | 167 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
include/dt-bindings/phy/phy-imx8-pcie.h | 14 +++++++
7 files changed, 273 insertions(+)

\
 
 \ /
  Last update: 2021-09-17 04:55    [W:0.076 / U:0.312 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site