lkml.org 
[lkml]   [2021]   [Sep]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH AUTOSEL 5.4 1/5] pwm: img: Don't modify HW state in .remove() callback
Date
From: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>

[ Upstream commit c68eb29c8e9067c08175dd0414f6984f236f719d ]

A consumer is expected to disable a PWM before calling pwm_put(). And if
they didn't there is hopefully a good reason (or the consumer needs
fixing). Also if disabling an enabled PWM was the right thing to do,
this should better be done in the framework instead of in each low level
driver.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/pwm/pwm-img.c | 16 ----------------
1 file changed, 16 deletions(-)

diff --git a/drivers/pwm/pwm-img.c b/drivers/pwm/pwm-img.c
index 22c002e685b3..37f9b688661d 100644
--- a/drivers/pwm/pwm-img.c
+++ b/drivers/pwm/pwm-img.c
@@ -329,23 +329,7 @@ static int img_pwm_probe(struct platform_device *pdev)
static int img_pwm_remove(struct platform_device *pdev)
{
struct img_pwm_chip *pwm_chip = platform_get_drvdata(pdev);
- u32 val;
- unsigned int i;
- int ret;
-
- ret = pm_runtime_get_sync(&pdev->dev);
- if (ret < 0) {
- pm_runtime_put(&pdev->dev);
- return ret;
- }
-
- for (i = 0; i < pwm_chip->chip.npwm; i++) {
- val = img_pwm_readl(pwm_chip, PWM_CTRL_CFG);
- val &= ~BIT(i);
- img_pwm_writel(pwm_chip, PWM_CTRL_CFG, val);
- }

- pm_runtime_put(&pdev->dev);
pm_runtime_disable(&pdev->dev);
if (!pm_runtime_status_suspended(&pdev->dev))
img_pwm_runtime_suspend(&pdev->dev);
--
2.30.2
\
 
 \ /
  Last update: 2021-09-17 04:36    [W:0.056 / U:0.240 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site