lkml.org 
[lkml]   [2021]   [Sep]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v3 01/30] ABI: sysfs-bus-usb: better document variable argument
Date
On almost all ABI documents, variable arguments are declared
as <foo_bar>. Change it here too, in order to allow replacing
such wildcards by regexes on a scriptable way.

Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Acked-by: Rajat Jain <rajatja@google.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
---
Documentation/ABI/testing/sysfs-bus-usb | 16 ++++++++--------
1 file changed, 8 insertions(+), 8 deletions(-)

diff --git a/Documentation/ABI/testing/sysfs-bus-usb b/Documentation/ABI/testing/sysfs-bus-usb
index 73eb23bc1f34..42103f0f54d6 100644
--- a/Documentation/ABI/testing/sysfs-bus-usb
+++ b/Documentation/ABI/testing/sysfs-bus-usb
@@ -166,14 +166,14 @@ Description:
The file will be present for all speeds of USB devices, and will
always read "no" for USB 1.1 and USB 2.0 devices.

-What: /sys/bus/usb/devices/.../(hub interface)/portX
+What: /sys/bus/usb/devices/.../<hub_interface>/port<X>
Date: August 2012
Contact: Lan Tianyu <tianyu.lan@intel.com>
Description:
- The /sys/bus/usb/devices/.../(hub interface)/portX
+ The /sys/bus/usb/devices/.../<hub_interface>/port<X>
is usb port device's sysfs directory.

-What: /sys/bus/usb/devices/.../(hub interface)/portX/connect_type
+What: /sys/bus/usb/devices/.../<hub_interface>/port<X>/connect_type
Date: January 2013
Contact: Lan Tianyu <tianyu.lan@intel.com>
Description:
@@ -182,7 +182,7 @@ Description:
The file will read "hotplug", "hardwired" and "not used" if the
information is available, and "unknown" otherwise.

-What: /sys/bus/usb/devices/.../(hub interface)/portX/location
+What: /sys/bus/usb/devices/.../<hub_interface>/port<X>/location
Date: October 2018
Contact: Bjørn Mork <bjorn@mork.no>
Description:
@@ -192,7 +192,7 @@ Description:
raw location value as a hex integer.


-What: /sys/bus/usb/devices/.../(hub interface)/portX/quirks
+What: /sys/bus/usb/devices/.../<hub_interface>/port<X>/quirks
Date: May 2018
Contact: Nicolas Boichat <drinkcat@chromium.org>
Description:
@@ -216,7 +216,7 @@ Description:
used to help make enumeration work better on some high speed
devices.

-What: /sys/bus/usb/devices/.../(hub interface)/portX/over_current_count
+What: /sys/bus/usb/devices/.../<hub_interface>/port<X>/over_current_count
Date: February 2018
Contact: Richard Leitner <richard.leitner@skidata.com>
Description:
@@ -230,10 +230,10 @@ Description:
Any time this value changes the corresponding hub device will send a
udev event with the following attributes::

- OVER_CURRENT_PORT=/sys/bus/usb/devices/.../(hub interface)/portX
+ OVER_CURRENT_PORT=/sys/bus/usb/devices/.../<hub_interface>/port<X>
OVER_CURRENT_COUNT=[current value of this sysfs attribute]

-What: /sys/bus/usb/devices/.../(hub interface)/portX/usb3_lpm_permit
+What: /sys/bus/usb/devices/.../<hub_interface>/port<X>/usb3_lpm_permit
Date: November 2015
Contact: Lu Baolu <baolu.lu@linux.intel.com>
Description:
--
2.31.1
\
 
 \ /
  Last update: 2021-09-16 11:02    [W:0.167 / U:0.264 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site