lkml.org 
[lkml]   [2021]   [Sep]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v1 2/2] nbd: reset the queue/io_timeout to default on disconnect
On Fri, Aug 06, 2021 at 07:59:14PM +0530, pkalever@redhat.com wrote:
> From: Prasanna Kumar Kalever <prasanna.kalever@redhat.com>
>
> Without any changes to NBD_ATTR_TIMEOUT (default is 30 secs),
> $ rbd-nbd map rbd-pool/image0 --try-netlink
> /dev/nbd0
> $ cat /sys/block/nbd0/queue/io_timeout
> 30000
> $ rbd-nbd unmap /dev/nbd0
> $ cat /sys/block/nbd0/queue/io_timeout
> 30000
>
> Now user sets NBD_ATTR_TIMEOUT to 60,
> $ rbd-nbd map rbd-pool/image0 --try-netlink --io-timeout 60
> /dev/nbd0
> $ cat /sys/block/nbd0/queue/io_timeout
> 60000
> $ rbd-nbd unmap /dev/nbd0
> $ cat /sys/block/nbd0/queue/io_timeout
> 60000
>
> Now user doesn't alter NBD_ATTR_TIMEOUT, but sysfs still shows it as 60,
> $ rbd-nbd map rbd-pool/image0 --try-netlink
> /dev/nbd0
> $ cat /sys/block/nbd0/queue/io_timeout
> 60000
> $ rbd-nbd unmap /dev/nbd0
> $ cat /sys/block/nbd0/queue/io_timeout
> 60000
>
> The problem exists with ioctl interface too.
>
> Signed-off-by: Prasanna Kumar Kalever <prasanna.kalever@redhat.com>
> ---
> drivers/block/nbd.c | 7 ++++++-
> 1 file changed, 6 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/block/nbd.c b/drivers/block/nbd.c
> index 16a1a14b1fd1..a45aabc4914b 100644
> --- a/drivers/block/nbd.c
> +++ b/drivers/block/nbd.c
> @@ -158,6 +158,7 @@ static void nbd_connect_reply(struct genl_info *info, int index);
> static int nbd_genl_status(struct sk_buff *skb, struct genl_info *info);
> static void nbd_dead_link_work(struct work_struct *work);
> static void nbd_disconnect_and_put(struct nbd_device *nbd);
> +static void nbd_set_cmd_timeout(struct nbd_device *nbd, u64 timeout);
>
> static inline struct device *nbd_to_dev(struct nbd_device *nbd)
> {
> @@ -1250,7 +1251,7 @@ static void nbd_config_put(struct nbd_device *nbd)
> destroy_workqueue(nbd->recv_workq);
> nbd->recv_workq = NULL;
>
> - nbd->tag_set.timeout = 0;
> + nbd_set_cmd_timeout(nbd, 0);
> nbd->disk->queue->limits.discard_granularity = 0;
> nbd->disk->queue->limits.discard_alignment = 0;
> blk_queue_max_discard_sectors(nbd->disk->queue, UINT_MAX);
> @@ -2124,6 +2125,10 @@ static int nbd_genl_reconfigure(struct sk_buff *skb, struct genl_info *info)
> if (ret)
> goto out;
>
> + /*
> + * On reconfigure, if NBD_ATTR_TIMEOUT is not provided, we will
> + * continue to use the cmd timeout provided with connect initially.
> + */
> if (info->attrs[NBD_ATTR_TIMEOUT])
> nbd_set_cmd_timeout(nbd,
> nla_get_u64(info->attrs[NBD_ATTR_TIMEOUT]));
> --
> 2.31.1
>

Looks fine:

Reviewed-by: Ming Lei <ming.lei@redhat.com>

--
Ming

\
 
 \ /
  Last update: 2021-09-16 10:24    [W:0.102 / U:0.056 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site